P16 工程防火 标准查询与下载

EN 1364-1:2015 非承重元件的耐火测试.第1部分:墙

This European standard specifies a method for determining the fire resistance of non-loadbearing walls. This European Standard is used in conjunction with EN 1363-1. It is applicable to internal non-loadbearing walls (partitions), with and without glazing, non-loadbearing walls consisting almost wholly of glazing (glazed non-loadbearing walls) and other non-loadbearing internal and external non-loadbearing walls with and without glazing. The fire resistance of external non-loadbearing walls can be determined under internal or external exposure conditions. In the latter case the external fire exposure curve given in EN 1363-2 is used. It is not applicable to: a) curtain walls (external non-loadbearing walls suspended in front of the floor slab), unless explicitly permitted under EN 1364-3 or EN 1364-4 which contain details of the methodology to be used. b) non-loadbearing walls containing door assemblies that are tested according to EN 1634-1. Specific requirements for testing glazed elements or non-loadbearing walls incorporating glazing are given in Annex A. Specific requirements relating to the testing of non-loadbearing external and internal walls designed to span horizontally between two independently proven fire resisting vertical structural elements are given in Annex B.

Fire resistance tests for non-loadbearing elements - Part 1: Walls

BS EN 13381-9:2015 测定结构构件耐火作用的试验方法. 带腹板开孔的钢梁应用的消防系统

Test methods for determining the contribution to the fire resistance of structural members. Applied fire protection systems to steel beams with web openings

ANSI/UL 1479-2015 穿透性与阻火性耐火试验安全性标准(第4版)

UL Standard for Safety Fire Tests of Through-Penetration Firestops (Fourth Edition)

EN 1366-2:2015 建筑设施的耐火测试.第2部分:防火挡板

This European Standard specifies a method for determining the fire resistance of fire dampers installed in fire separating elements designed to withstand heat and the passage of fire, smoke and gases at high temperature. This European Standard is used in conjunction with EN 1363-1. This standard is not suitable for testing fire dampers in suspended ceilings. This standard is not suitable for testing non-mechanical fire dampers (see EN 1366-12).

Fire resistance tests for service installations - Part 2: Fire dampers

DIN EN 13381-3:2015 测定结构构件耐火作用的试验方法.第3部分:混凝土构件应用的保护方法;德文版本EN 13381-3-2015

Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members; German version EN 13381-3:2015

DB43/T 1031-2015 野生脊椎动物标本制作技术规范

Technical specification for making specimens of wild vertebrates

BS 8414-2:2015 外部镶面系统的防火性能.结构钢架支撑并适用的非承重外部镶面系统的试验方法

Fire performance of external cladding systems. Test method for non-loadbearing external cladding systems fixed to and supported by a structural steel frame

BS 8414-1:2015 外部镶面系统的防火性能.建筑物的砌筑面墙用非承重外部镶面系统的试验方法

Fire performance of external cladding systems. Test method for non-loadbearing external cladding systems applied to the masonry face of a building

JIS A 1323 ERRATUM 1:2015 勘误

ERRATUM

BS ISO 5660-1:2015 燃烧反应试验. 热量释放, 产生烟雾以及质量损失率. 热释放率 (锥形量热计法) 和烟雾产生率 (动态测量)

Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)

JIS A 1313:2015 滚轮移动式防火门的检验标准

Inspection standard of rolling fire doors

DIN EN 13381-5:2015 测定结构构件耐火作用的试验方法.第5部分:混凝土/压型钢板组合构件应用的保护方法;德文版本EN 13381-5-2014

Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member; German version EN 13381-5:2014

DIN EN 13823:2015 建筑产品燃烧试验反应.建筑产品,包括遭受单一燃烧物热袭击的地板.德文版本EN 13823-2010+A1-2014

Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item; German version EN 13823:2010+A1:2014

BS ISO 17554:2014 对火灾测试的反应 质量损失测量

Reaction to fire tests. Mass loss measurement

JIS A 1310:2015 建筑外墙火焰传播的试验方法

Test method for fire propagation over building facades

NF P92-527:2015 建筑产品燃烧试验的反应. 除地板铺装外暴露于单燃烧体热侵蚀的建筑产品

La présente Norme européenne définit une méthode d'essai de détermination de la performance de réaction au feu des produits de construction, à l'exception des revêtements de sol et des produits figurant dans le Tableau 1 de la Décision CE 2000/147/CE, exposés à la sollicitation thermique provoquée par un "Single Burning Item" (SBI) (Objet Isolé en Feu) (OIF). Les méthodes de calcul sont fournies dans l'Annexe A. Des informations relatives à la précision de la méthode d'essai sont données dans l'Annexe B. Les méthodes d'étalonnage figurent dans les Annexes C et D, C étant une annexe normative.

Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

ASTM E119-15 建筑结构和材料防火测试的标准试验方法

4.1 These test methods are intended to evaluate the duration for which the types of building elements noted in 1.1 contain a fire, retain their structural integrity, or exhibit both properties during a predetermined test exposure. 4.2 The test exposes a test specimen to a standard fire controlled to achieve specified temperatures throughout a specified time period. When required, the fire exposure is followed by the application of a specified standard fire hose stream applied in accordance with Practice E2226. The test provides a relative measure of the fire-test-response of comparable building elements under these fire exposure conditions. The exposure is not representative of all fire conditions because conditions vary with changes in the amount, nature and distribution of fire loading, ventilation, compartment size and configuration, and heat sink characteristics of the compartment. Variation from the test conditions or test specimen construction, such as size, materials, method of assembly, also affects the fire-test-response. For these reasons, evaluation of the variation is required for application to construction in the field. 4.3 The test standard provides for the following: 4.3.1 For walls, partitions, and floor or roof test specimens: 4.3.1.1 Measurement of the transmission of heat. 4.3.1.2 Measurement of the transmission of hot gases through the test specimen. 4.3.1.3 For loadbearing elements, measurement of the load carrying ability of the test specimen during the test exposure. 4.3.2 For individual loadbearing members such as beams and columns: 4.3.2.1 Measurement of the load carrying ability under the test exposure with consideration for the end support conditions (that is, restrained or not restrained). 4.4 The test standard does not provide the following: 4.4.1 Information as to performance of test specimens constructed with components or lengths other than those tested. 4.4.2 Evaluation of the degree by which the test specimen contributes to the fire hazard by generation of smoke, toxic gases, or other products of combustion. 4.4.3 Measurement of the degree of control or limitation of the passage of smoke or products of combustion through the test specimen. 4.4.4 Simulation of the fire behavior of joints between building elements such as floor-wall or wall-wall, etc., connections.

Standard Test Methods for Fire Tests of Building Construction and Materials

DIN EN 13381-2:2014 测定结构件耐火作用的试验方法.第2部分:垂直保护隔板;德文版本EN 13381-2-2014

Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes; German version EN 13381-2:2014

ISO 10294-1:1996/Amd 1:2014 耐火试验 用于空气调节系统的防火阀 第1部分:试验方法;修改件1

Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method; Amendment 1

BS PD 7974-5:2014 消防安全工程原则在建筑设计中的应用.消防和救援服务干预（子系统5）

Application of fire safety engineering principles to the design of buildings. Fire and rescue service intervention (Sub-system 5)