P16 工程防火 标准查询与下载
共找到 542 条与 工程防火 相关的标准，共 37 页
이 표준은 설비들에 의해서 관통되는 구획 부재의 관통부 충전 시스템에 대한 내화성능(차염성능과차열성능 등) 평가를 위한 가열조건, 시험방법과 성능기준을 규정한다.
Fire tests for building elements and component ― Fire testing of service installing ― Part 1: Penetration seals
- ICS
- 13.220.50;91.140.01
- CCS
- P16
- 发布
- 2013-12-16
- 实施
- 2013/12/16
Protection against lightning - Part 2: Risk management; Supplement 3: Additional information for the application of DIN EN 62305-2 (VDE 0185-305-2)
- ICS
- 91.120.40
- CCS
- P16
- 发布
- 2013-12
- 实施
Protection against lightning - Part 1: general principles
- ICS
- 91.120.40
- CCS
- P16
- 发布
- 2013-11-09
- 实施
- 2013-11-09
This part of ISO 12468 establishes the classification of roofs tested in accordance with ISO 12468-1. Performance criteria are established with respect to the following: — fire penetration or openings; — external fire spread; — falling of flaming droplets or debris.
External exposure of roofs to fire.Part 2: Classification of roofs
- ICS
- 13.220.50;91.060.20
- CCS
- P16
- 发布
- 2013-11
- 实施
This part of ISO 12468 specifies a test method to determine the resistance of roofs to external exposure to fire. This method evaluates the behaviour of the roof when exposed to three types of burning brands combined with wind and with or without heat radiation, concerning a) the fire spread across the external surface of the roof, b) the fire spread within the roof, c) the fire penetration, and d) the production of flaming droplets or debris falling through the roof, from the underside of the roof,or from the exposed surface.
External exposure of roofs to fire.Part 1: Test method
- ICS
- 13.220.50;91.060.20
- CCS
- P16
- 发布
- 2013-11
- 实施
Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions; German version EN 15254-4:2008+A1:2011
- ICS
- 13.220.50;91.060.10
- CCS
- P16
- 发布
- 2013-10
- 实施
Fire resistance tests for loadbearing elements - Part 1: Walls; German version EN 1365-1:2012 + AC:2013
- ICS
- 13.220.50;91.060.10
- CCS
- P16
- 发布
- 2013-08
- 实施
The test specified in ISO 22899-1 is designed to give an indication of how passive fire protection materials will perform in a jet fire. This part of ISO 22899 provides: —background information on the applicability and validation of the jet fire test; —further details on testing pipe penetration seals; —guidance on the interpretation of the tests results and on an optional classification system; —guidance on the combination of results from hydrocarbon furnace tests and resistance to jet fire tests. ISO 22899-1 describes the thickness of fire protection material (sometimes referred to as passive fire protection; PFP) required to resist the application of a 'jet fire'. This part of ISO 22899 provides information on the 'erosion factor' which is the additional thickness required above and beyond that required to satisfy the relevant criteria of ISO 834 (or other national or regional standards designed to evaluate the fire resistance with respect to a fully developed fire) for the element/construction under test.
Determination of the resistance to jet fires of passive fire protection - Part 2: Guidance on classification and implementation methods
- ICS
- 13.220.50
- CCS
- P16
- 发布
- 2013-06-15
- 实施
Test methods for determining the contribution to the fire resistance of structural members. Applied reactive protection to steel members
- ICS
- 13.220.50
- CCS
- P16
- 发布
- 2013-05-31
- 实施
- 2013-05-31
This European Standard specifies a test method for determining the contribution made by applied reactive fire protection systems to the fire resistance of structural steel members, which can be used as beams or columns. It considers only sections without openings in the web. It is not directly applicable to structural tension members without further evaluation. Results from analysis of I or H - sections are directly applicable to angles, channels and T-sections for the same section factor, whether used as individual elements or as bracing. This standard does not apply to solid bar or rod. It covers fire protection systems that involve only reactive materials and not to passive fire protection materials as defined in this document. The evaluation is designed to cover a range of thicknesses of the applied fire protection material, a range of steel sections, characterised by their section factors, a range of design temperatures and a range of valid fire protection classification periods. This European Standard contains the fire test procedures, which specifies the tests which should be carried out to determine the ability of the fire protection system to remain coherent and attached to the steelwork, and to provide data on the thermal characteristics of the fire protection system, when exposed to the standard temperature/time curve specified in EN 1363-1. In special circumstances, where specified in National Building Regulations, there can be a need to subject reactive protection material to a smouldering curve; the test for this and the special circumstances for its use are described in Annex A. The fire test methodology makes provision for the collection and presentation of data, which can be used as direct input to the calculation of fire resistance of steel structural members in accordance with the procedures given in EN 1993-1-2 and EN 1994-1-2. This European Standard also contains the assessment, which prescribes how the analysis of the test data shall be made an
Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members
- ICS
- 13.220.50;91.080.10
- CCS
- P16
- 发布
- 2013-05-01
- 实施
- 2013-05-01
本标准规范了电气火灾监控系统的术语定义、系统设计、施工安装及验收。本标准适用于电气火灾监控系统的设计、施工安装和验收。
Code for Design, Construction and Acceptance of Electrical Fire Monitoring System
- ICS
- 13.220.01
- CCS
- P16
- 发布
- 2013/03/31
- 实施
- 2013/03/31
Fire classification of construction products and building elements - Part 2: classification using data from fire resistance tests, excluding ventilation services
- ICS
- 13.220.50
- CCS
- P16
- 发布
- 2013-03-27
- 实施
- 2013-03-27
Fire classification of construction products and building elements - Part 2: classification using data from fire resistance tests, excluding ventilation services
- ICS
- 13.220.50
- CCS
- P16
- 发布
- 2013-03-27
- 实施
Fire classification of construction products and building elements - Part 1: classification using data from reaction to fire tests
- ICS
- 13.220.50
- CCS
- P16
- 发布
- 2013-02-02
- 实施
- 2013-02-02
Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (IEC 62561-3:2012, modified); German version EN 62561-3:2012
- ICS
- 91.120.40
- CCS
- P16
- 发布
- 2013-02
- 实施
- 2013-02-01
Lightning Protection System Components (LPSC) - Part 1: Requirements for connection components (IEC 62561-1:2012, modified); German version EN 62561-1:2012
- ICS
- 91.120.40
- CCS
- P16
- 发布
- 2013-02
- 实施
- 2013-02-01
Protection against lightning - Part 2: Risk management (IEC 62305-2:2010, modified); German version EN 62305-2:2012
- ICS
- 91.120.40
- CCS
- P16
- 发布
- 2013-02
- 实施
- 2013-02-01
Protection against lightning - Part 2: Risk management - Supplement 2: Calculation assistance for assessment of risk for structures, with CD-ROM
- ICS
- 91.120.40
- CCS
- P16
- 发布
- 2013-02
- 实施
Execution of works - Execution of intumescent coating for fire protection of steel structure - Part 1-2 : general criteria for selection of materials
- ICS
- 87.040
- CCS
- P16
- 发布
- 2013-01-12
- 实施
- 2013-01-12
Execution of works - Execution of intumescent coating for fire protection of steel structure - Part 1-1 : contract bill of technical model clauses
- ICS
- 87.040
- CCS
- P16
- 发布
- 2013-01-12
- 实施
- 2013-01-12
