P26 金属结构工程 标准查询与下载
共找到 507 条与 金属结构工程 相关的标准，共 34 页
Design specifications for water stop devices for gates in hydropower projects
- ICS
- 27.140
- CCS
- P26
- 发布
- 2016-12-05
- 实施
- 2017-05-01
Technical regulations for safety inspection of post and telecommunications towers
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2016-09-28
- 实施
- 2016-12-01
本标准规定了碳素钢、低合金高强度结构钢、不锈钢、不锈钢复合钢板的焊条电弧焊、埋弧焊和气体保护电弧焊的技术要求。本标准适用于水工金属结构的焊接，也适用于水利水电工程其他机械产品钢结构的焊接。
General technical specifications for welding of steel structures in water project
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2016-07-20
- 实施
- 2016-07-21
General technical conditions for welding of hydraulic metal structures
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2016-07-20
- 实施
- 2016-10-20
National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
- ICS
- 91.010.30;91.080.10
- CCS
- P26
- 发布
- 2016-04
- 实施
National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 1-5: Plated structural elements
- ICS
- 91.010.30;91.080.10
- CCS
- P26
- 发布
- 2016-04
- 实施
1.1 This specification covers corrugated aluminum alloy structural plate used in the construction of pipe, pipe-arches, arches, underpasses, box culverts, and special shapes for field assembly. Appropriate fasteners are also described. The pipe, arches, and other shapes are generally used for drainage purposes, pedestrian and vehicular underpasses, and utility tunnels. Aluminum box culvert shapes are covered in Specification B864/B864M. 1.2 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and plate thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of plate thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The purchaser must correlate the above factors and also the corrosion and abrasion requirements of the field installation with the plate thickness. The structural design of corrugated aluminum structural plate pipe and the proper installation procedures are given in Practices B790/B790M and B789/B789M, respectively. A procedure for using life-cycle cost analysis techniques to evaluate alternate drainage system designs using corrugated metal pipe is given in Practice A930. 1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other.
Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
- ICS
- 77.150.10
- CCS
- P26
- 发布
- 2016
- 实施
Eurocode 3 - Design of steel structures - Part 1-4 : general rules - Supplementary rules for stainless steels
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2015-12-11
- 实施
- 2015-12-11
本规程适用于10层及10层以上或房屋高度大于28m的住宅建筑以及房屋高度大于24m的其他高层民用建筑钢结构的设计、制作与安装。非抗震设计和抗震设防烈度为6度至9度抗震设计的高层民用建筑钢结构，其适用的房屋最大高度和结构类型应符合本规程的有关规定。 本规程不适用于建造在危险地段以及发震断裂最小避让距离内的高层民用建筑钢结构。
Technical specification for steel structure of tall building
- ICS
- CCS
- P26
- 发布
- 2015-11-30
- 实施
- 2016-05-01
National Annex - Nationally determined parameters - Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules; Amendment A3
- ICS
- 91.010.30;91.080.10
- CCS
- P26
- 发布
- 2015-11
- 实施
本规范适用于水电工程钢闸门及拦污栅的设计。
Design code for steel gate in hydropower projects
- ICS
- 27.140
- CCS
- P26
- 发布
- 2015-10-27
- 实施
- 2016-03-01
Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels; German version EN 1993-1-4:2006 + A1:2015
- ICS
- 91.010.30;91.080.10
- CCS
- P26
- 发布
- 2015-10
- 实施
Technical specification for prefabricated laminated floor steel structure buildings
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2015-09-24
- 实施
- 2015-11-24
National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
- ICS
- 91.010.30;91.080.10
- CCS
- P26
- 发布
- 2015-08
- 实施
Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence
- ICS
- 25.160.10
- CCS
- P26
- 发布
- 2015-07-01
- 实施
Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- ICS
- 91.010.30;91.080.10
- CCS
- P26
- 发布
- 2015-06
- 实施
本规范适用于水电工程启闭机，包括螺杆式启闭机、固定卷扬式启闭机、移动式启闭机和液压启闭机的制造安装与验收。
Code for manufacture erection and acceptance of gate hoists in hydropower projects
- ICS
- 27.140
- CCS
- P26
- 发布
- 2015-04-02
- 实施
- 2015-09-01
Timber structures - Test methods - Joints made with punched metal plate fasteners; German version EN 1075:2014
- ICS
- 91.080.20
- CCS
- P26
- 发布
- 2015-03
- 实施
National Annex - Nationally determined parameters - Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules; Amendment 2
- ICS
- 91.010.30;91.080.10
- CCS
- P26
- 发布
- 2015-03
- 实施
Technical specifications for hot-rolled U-shaped steel sheet piles
- ICS
- 91.200
- CCS
- P26
- 发布
- 2015-01-13
- 实施
- 2015-05-10
