P26 金属结构工程 标准查询与下载

ASTM B746/B746M-16 现场栓接管, 管拱和拱用波纹铝合金结构板的标准规格

1.1 This specification covers corrugated aluminum alloy structural plate used in the construction of pipe, pipe-arches, arches, underpasses, box culverts, and special shapes for field assembly. Appropriate fasteners are also described. The pipe, arches, and other shapes are generally used for drainage purposes, pedestrian and vehicular underpasses, and utility tunnels. Aluminum box culvert shapes are covered in Specification B864/B864M. 1.2 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and plate thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of plate thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The purchaser must correlate the above factors and also the corrosion and abrasion requirements of the field installation with the plate thickness. The structural design of corrugated aluminum structural plate pipe and the proper installation procedures are given in Practices B790/B790M and B789/B789M, respectively. A procedure for using life-cycle cost analysis techniques to evaluate alternate drainage system designs using corrugated metal pipe is given in Practice A930. 1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other.

Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

NF P22-314/A1*NF EN 1993-1-4/A1:2015 欧洲法规3. 钢结构的设计. 第1-4部分: 通用规则. 不锈钢补充规则

Eurocode 3 - Design of steel structures - Part 1-4 : general rules - Supplementary rules for stainless steels

JGJ 99-2015 高层民用建筑钢结构技术规程

本规程适用于10层及10层以上或房屋高度大于28m的住宅建筑以及房屋高度大于24m的其他高层民用建筑钢结构的设计、制作与安装。非抗震设计和抗震设防烈度为6度至9度抗震设计的高层民用建筑钢结构，其适用的房屋最大高度和结构类型应符合本规程的有关规定。 本规程不适用于建造在危险地段以及发震断裂最小避让距离内的高层民用建筑钢结构。

Technical specification for steel structure of tall building

DIN EN 1999-1-1/NA/A3:2015 国家附录. 国家确定参数. 欧洲法规9: 铝结构设计. 第1-1部分: 一般结构规则;修改件A3

National Annex - Nationally determined parameters - Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules; Amendment A3

NB 35055-2015 水电工程钢闸门设计规范

本规范适用于水电工程钢闸门及拦污栅的设计。

Design code for steel gate in hydropower projects

DIN EN 1993-1-4:2015 欧洲法规3.钢架结构设计.第1-4部分:一般规则.不锈钢补充规则;德文版本EN 1993-1-4-2006+A1-2015

Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels; German version EN 1993-1-4:2006 + A1:2015

DB42/T 1093-2015 装配式叠合楼盖钢结构建筑技术规程

Technical specification for prefabricated laminated floor steel structure buildings

DIN EN 1993-1-1/NA:2015 国家附录.国家制定参数.欧洲规范3:钢结构设计.第1-1部分:一般规则和建筑物用规则

National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings

PD CEN/TR 16862:2015 塑料焊接主管.任务,责任,知识,技能和能力

Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence

EN 1993-1-4:2006/A1:2015 欧洲规范3. 钢构建筑的设计.第1部分第4节:一般准则.不锈钢的补充规则

Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels

NB/T 35051-2015 水电工程启闭机制造安装及验收规范

本规范适用于水电工程启闭机，包括螺杆式启闭机、固定卷扬式启闭机、移动式启闭机和液压启闭机的制造安装与验收。

Code for manufacture erection and acceptance of gate hoists in hydropower projects

DIN EN 1075:2015 木质构件.试验方法.金属板冲压紧固件连接接头;德文版本EN 1075-2014

Timber structures - Test methods - Joints made with punched metal plate fasteners; German version EN 1075:2014

DIN EN 1999-1-1/NA/A2:2015 国家附录. 国家确定参数. 欧洲法规9: 铝结构设计. 第1-1部分: 一般结构规则;修改件2

National Annex - Nationally determined parameters - Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules; Amendment 2

DB42/T 1035-2015 热轧U型钢板桩技术规程

Technical specifications for hot-rolled U-shaped steel sheet piles

DIN 19704-3:2014-11 钢制液压结构件.第3部分:电气设备

Hydraulic steel structures - Part 3: Electrical equipment

DIN 19704-2:2014-11 钢制液压结构件.第2部分:设计和制造

Hydraulic steel structures - Part 2: Design and manufacturing

DIN 19704-1:2014 钢制液压结构件.第1部分:设计和计算准则

Hydraulic steel structures - Part 1: Criteria for design and calculation

NB/T 35045-2014 水电工程钢闸门制造安装及验收规范

本规范适用于水电工程和其他工程钢闸门的制造、安装及验收。 本规范规定了水电工程钢闸门(包括拦污栅)制造、安装及验收的技术要求。

Code for manufacture installation and acceptance of steel gates in hydropower engineering

DIN EN 1993-2/NA:2014 国家附录.国家制定参数.欧洲法规3:钢结构设计.第2部分:钢桥

National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 2: Steel bridges

DIN EN 1993-1-1/A1:2014 欧洲规范3: 钢结构设计. 第1-1部分: 通用规则和建筑规则; 德文版本EN 1993-1-1-2005/A1-2014

Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings; German version EN 1993-1-1:2005/A1:2014