Q18 装修材料 标准查询与下载

ANSI/NSF 342(i3r1)-2012 墙面涂料产品可持续性评估

Sustainability Assessment for Wallcovering Products

ASTM C216-12a 饰面砖(粘土或页岩制实心砌块)标准规格

1.1 This specification covers brick intended for use in masonry and supplying structural or facing components, or both, to the structure. 1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining conformance or nonconformance to the property requirements (Section 7) of this specification is beyond the scope of this specification. 1.3 The brick are prismatic units available in a variety of sizes, textures, colors, and shapes. This specification is not intended to provide specifications for paving brick (see Specification C902). 1.4 Brick are ceramic products manufactured primarily from clay, shale, or similar naturally occurring earthy substances and subjected to a heat treatment at elevated temperatures (firing). Additives or recycled materials are permitted to be included at the option of the manufacturer. The heat treatment must develop a fired bond between the particulate constituents to provide the strength and durability requirements of this specification (see Terminology C1232). 1.5 Brick are shaped during manufacture by molding, pressing, or extrusion, and the shaping method is a way to describe the brick. 1.5.1 This standard and its individual requirements shall not be used to qualify or corroborate the performance of a masonry unit made from other materials, or made with other forming methods, or other means of binding the materials. 1.6 Three types of brick in each of two grades are covered. 1.7 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.8 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)

JC/T 2082-2011 调湿功能室内建筑装饰材料

本标准规定了湿度功能室内建筑装饰材料的术语和定义，分类和标记，一般要求，技术要求，试验方法，检验规则以及标志、包装、运输和贮存等。 本标准适用于具有湿度调节功能的室内建筑装饰材料及制品。其他室内装修材料也可参照执行。

Indoor decorative building materials with the function of humidity-control

JC/T 2079-2011 建筑用弹性质感涂层材料

本标准规定了建筑用弹性质感涂层材料的分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以合成树脂乳液为基料，由颜料、不同粒径彩砂等填料及助剂配制而成，通过刮涂、喷涂或刷涂等施工方法，在建筑物表面形成具有艺术质感效果的弹性抗裂饰面涂层。

Elastomeric stucco for building

DIN EN 15102:2011 装饰墙面涂料.卷材和板材.德文版 EN 15102-2007+ A1-2011

This European Standard applies to all forms of wallcovering products in roll and panel form as defined in EN 235 supplied for hanging onto internal walls.

Decorative wall coverings - Roll and panel form; German version EN 15102:2007+A1:2011

KS F 2608-2011 建筑材料线膨胀系数测定方法

이 표준은 건축 재료의 선팽창률을 압봉식 열팽창계에 의해 측정하는 방법에 대하여 규정한다.

Measuring method of linear thermal expansion for building materials

NF D63-013/IN1:2011 装饰墙覆盖物.卷筒和嵌板式.

Decorative wall coverings - Roll and panel form.

NF D63-013:2011 装饰墙覆盖物.卷筒和嵌板式.

Decorative wall coverings - Roll and panel form.

ANSI/ASTM F2440:2011 室内墙/部件填充物规格

Specification For Indoor Wall/feature Padding

ASTM D7143-11 从室内材料/产品测定挥发性有机辐射用发射光电管的标准操作规程

Indoor materials/products are products or materials used for construction works or in the indoor environment. The area specific emission rates of volatile organic compounds from an indoor material/product may be used to estimate the expected contribution of emissions from that material/product to the atmosphere of a given indoor environment. Emission data may also be used to compare and categorize different indoor materials/products of similar function. Emission cell testing of area specific emissions may alternatively be used for studying secondary interactions (for example, sink effects (absorption and re-emission of volatile organics by the indoor material/product) or emissions generated by chemical degradation of the indoor material/product caused by specific atmospheric agents such as water, ozone or NOx).1.1 This practice is intended for determining volatile organic compound (VOC) emissions from materials and products using emission cells. It can be applied in principle to most construction materials and many products used indoors. Objectives include: 1.1.1 To provide manufacturers, builders, and end users with emission data useful for evaluating the impact of building products, new or old, on indoor air concentrations in a model room. 1.1.2 To promote the development of products with lower VOC emissions. 1.2 This practice is for identifying emitted VOCs and for determining the area specific emission rate of VOCs from newly produced building products under defined climate conditions. The method can also be applied to aged products. 1.3 In accordance with the definition of an emission cell, it is also possible to perform nondestructive emission measurements on building products on-site in buildings. However, the procedure for such measurements is not described in this standard. 1.4 This practice describes the design, construction, performance evaluation and use of emission cells for VOC emission testing. Sampling, transport and storage of materials to be tested, and preparation of test specimens are also described. 1.5 Air sampling and analytical methods for the determination of VOCs are described in Practice D6196. Alternative sampling and analytical approaches for formaldehyde and other carbonyls are described in Test Method D5197. Note 18212;All volatile (vapor-phase) carbonyls except formaldehyde can be analyzed by either Practice D6196 or by Test Method D5197. Note 28212;Direct-reading instruments can also be applied for specific objectives. Note 38212;Some volatile inorganic compounds can, in principle, also be analyzed (for example, ammonia). 1.6 An example of an emission cell is described in Appendix X2 of this practice. 1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products

HJ 2502-2010 环境标志产品技术要求 壁纸

本标准规定了壁纸类环境标志产品的术语和定义、基本要求、技术内容和检验方法。 本标准适用于以纸或布为基材的各类壁纸，不适用于墙毡及其他类似的墙挂。

Technical requirement for environmental labeling products Wallpapers

DB61/T 505-2010 镇巴板石

本标准适用于建筑装饰用的镇巴天然板石，包括饰面板和瓦板。其他用途的天然板石也可参照使用。

Zhenba Banshi

ISO 9149:2010 墙面饰层软木辊子.规范

This International Standard specifies the requirements of cork wallcoverings in roll form to be used within buildings. The standard contains provisions for the evaluation of conformity of the product. It also includes requirements for marking, packaging and labelling.

Cork wallcoverings in rolls - Specifications

BS EN 1816:2010 弹性地板覆盖物.带有泡沫衬背的同质和异质光滑橡胶地板覆盖物规范

This European Standard specifies the characteristics of homogeneous and heterogeneous smooth (including grained or embossed) rubber floor coverings with foam backing, supplied in roll or in tile form. This European Standard includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN 685). It also specifies requirements for marking.

Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing

BS EN 1817:2010 弹性地板覆盖物.相同和不同种光滑橡胶地板覆盖物规范

This European Standard specifies the characteristics of homogeneous and heterogeneous smooth (including grained or embossed) rubber floor coverings, supplied in either tile or roll form. This European Standard includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN 685). It also specifies requirements for marking.

Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings

JIS A 6909 AMD 2:2010 建筑物纹理精整用涂覆材料(修改件2)

Coating materials for textured finishes of buildings (Amendment 2)

ANSI/NSF 342(i1)-2010 NSF 342墙面饰层生产和分销的可持续性评定

NSF 342 Sustainability Assessment for Wallcovering Manufacturing & Distribution

ASTM D5146-10 溶剂型建筑涂料试验的标准指南

1.1 This guide covers the selection and use of procedures for testing solvent-borne coatings to be used on exterior, interior or both types of surfaces (see Note 1). The properties that can be examined or, in some cases, the relevant test procedures are listed in Table 1 and Table 2. Note 18212;The term “architectural coating” as used here combines the definition in Terminology D16 with that in the FSCT Paint/Coatings Dictionary, as follows: “Organic coatings intended for on-site application to interior or exterior surfaces of residential, commercial, institutional, or industrial buildings, in contrast to industrial coatings. They are protective and decorative finishes applied at ambient temperatures. Often called Trade Sales Coatings.” Note 28212;Architectural coatings that are designed to give better performance than most conventional coatings because they are tougher and more stain- and abrasion-resistant are covered by Guide D3730. 1.2 The types of organic coatings covered by this guide are as follows:(1) Type 1 Interior Low-Gloss Wall Finish, (2) Type 2 Interior Gloss and Semigloss Wall and Trim Enamels, (3) Type 3 Exterior House and Trim Coatings, and(4) Type 4 Floor Enamel, Exterior and/or Interior. 1.2.1 Each is intended for application by brushing, rolling, spraying, or other means to the materials appropriate for its type, which may include wood, plaster, wallboard, masonry, steel, previously painted surfaces, and other architectural substrates. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide to Testing Solvent-Borne Architectural Coatings

ASTM D7251-10 杂色塑料壁板产品的颜色和外观保持性的标准规范

1.1 This specification establishes requirements and test methods for the color and appearance retention of variegated color plastic siding products. 1.2 Color retention testing provides a method for estimating the acceptability of color change in a siding product over a period of years of service. 1.3 Characterization of color and appearance for variegated colors is complicated by the presence of multiple colors in a random pattern. The procedure is based on using a template to reference six spots for color measurement. 1.4 Methods of indicating compliance with this specification are provided. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 18212;There is no known ISO equivalent to this standard.

Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products

ANSI/NALFA LF-01-2010 复合地板规范和实验方法

The product standard shall apply to the performance of residential and commerical uses of laminate flooring. The Standard will be useful in guiding/assisting manufacturers and educating suppliers and consumers about the minimum performance of laminate flooring in residential, light commerical, commerical and heavy commerical settings.

Laminate Flooring Specifications and Test Methods