Q21 石材制品 标准查询与下载

DIN EN 12059:2008 天然石料制品.立体石料加工.要求

This European Standard specifies requirements for the following stone units: a) Structural solid stone units: i. Load bearing stone elements, typically subject to prevailing compression stresses, such as solid columns, arches and similar; ii. Solid stone elements used for parapets, handrails, balustrades, copings and the like, intended to withstand horizontal live loadings in addition to any dead load. b) Finishing solid stone units: i. Curved cladding panels, for the external finishing of walls, columns or pilasters; ii. Stone elements for framing one or more side openings in building walls or floors, such as sills, jambs, architraves and similar. This European Standard does not include stone masonry units, as defined in EN 771-6, stone which is a 'cast- on' finish to pre-cast concrete or agglomerated stones. Moreover it does not cover commemorative or funeral stones and sculptures, when they do not show the above mentioned characteristics.

Natural stone products - Dimensional stone work - Requirements; English version of DIN EN 12059:2008-06

BS EN 15388:2008 烧结石料 壁橱和厨房顶部用厚木板和裁板用品

This European Standard specifies requirements for slabs and cut-to-size products of agglomerated stone which are made for use as vanity and kitchen tops, or other similar use in furnishing.

Agglomerated stone - Slabs and cut-to-size products for vanity and kitchen tops

NF B10-623:2008 天然石.命名标准

Natural stone - Denomination criteria.

SN/T 2057-2008 进口石材放射性检验规程

本标准规定了进口石材的抽样、检验和结果判定的方法及处置。 本标准适用于进口石材的现场放射性检验。

Rules for inspection of radiativity for import stone

DIN EN 12440:2008 天然石料.命名准则

This European Standard specifies the criteria for the designation of natural stone from raw material to finished products.

Natural stone - Denomination criteria; English version of DIN EN 12440:2008-04

BS EN 12059:2008+A1:2011 天然石料制品.立体石料加工.要求

Natural stone products. Dimensional stone work. Requirements

BS EN 12059:2008 天然石料制品.立体石料加工.要求

This European Standard specifies requirements for the following stone units: a) Structural solid stone units: i. Load bearing stone elements, typically subject to prevailing compression stresses, such as solid columns, arches and similar; ii. Solid stone elements used for parapets, handrails, balustrades, copings and the like, intended to withstand horizontal live loadings in addition to any dead load. b) Finishing solid stone units: i. Curved cladding panels, for the external finishing of walls, columns or pilasters; ii. Stone elements for framing one or more side openings in building walls or floors, such as sills, jambs, architraves and similar. This European Standard does not include stone masonry units, as defined in EN 771-6, stone which is a ‘caston’ finish to pre-cast concrete or agglomerated stones. Moreover it does not cover commemorative or funeral stones and sculptures, when they do not show the above mentioned characteristics.

Natural stone products - Dimensional stone work - Requirements

DB44/T 494-2008 英 石

本标准规定了英石的定义、产品分类、技术要求、加工方法、试验方法、检验规则和标志、运输的要求。本标准适用于天然英石。

Ying Limestone

BS EN 12440:2008 天然石料.命名标准

This European Standard specifies the criteria for the designation of natural stone from raw material to finished products.

Natural stone — Denomination criteria

CEN EN 12059-2008_ 天然石料制品.空间石料工艺.要求

This European Standard specifies requirements for the following stone units: a) Structural solid stone units: i. Load bearing stone elements, typically subject to prevailing compression stresses, such as solid columns, arches and similar; ii. Solid stone elements used for parapets, handrails, balustrades, copings and the like, intended to withstand horizontal live loadings in addition to any dead load. b) Finishing solid stone units: i. Curved cladding panels, for the external finishing of walls, columns or pilasters; ii. Stone elements for framing one or more side openings in building walls or floors, such as sills, jambs, architraves and similar. This European Standard does not include stone masonry units, as defined in EN 771-6, stone which is a ‘caston’ finish to pre-cast concrete or agglomerated stones. Moreover it does not cover commemorative or funeral stones and sculptures, when they do not show the above mentioned characteristics.

Natural stone products — Dimensional stone work — Requirements

CEN EN 15285-2008_ 再造石.地板和楼梯用标准尺寸瓷砖（内部和外部）

This European Standard specifies requirements and appropriate test methods for modular tiles of agglomerated stone which are made for use as flooring and stairs for internal and external uses, fixed by mortar or adhesives. It also provides for the evaluation of conformity and marking of the products to the requirements of this European Standard. This European Standard is not applicable to terrazzo tiles covered by EN 13748-1 and EN 13748-2 (see Bibliography).

Agglomerated stone — Modular tiles for flooring and stairs (internal and external)

ASTM C119-08e2 与规格石料相关的标准术语

Standard Terminology Relating to Dimension Stone

ASTM C1526-08 蛇纹岩规格石料标

1.1 This specification covers the material characteristics, physical requirements, and sampling appropriate for the selection of serpentine (serpentine marble) for general building and structural purposes. Refer to Guides C 1242 and C 1528 for the appropriate selection and use of serpentine dimension stone. 1.2 Dimension serpentine shall include stone that is sawed, cut, split, or otherwise finished or shaped and shall specifically exclude molded, cast, or otherwise artificially aggregated units composed of fragments, and also crushed and broken stone.

Standard Specification for Serpentine Dimension Stone

ASTM D5878-08 工程技术用岩石质量分级系统的使用标准指南

The classification systems included in this standard and their respective applications are as follows: Rock Mass Rating System (RMR) or Geomechanics Classification8212;This system has been applied to tunneling, hard-rock mining, coal mining, stability of rock slopes, rock foundations, borability, rippability, dredgability, weatherability, and rock bolting. Rock Structure Rating System (RSR)8212;This system has been used in tunnel support and excavation and in other ground support work in mining and construction. The Q System or Norwegian Geotechnical Institute System (NGI)8212;This system has been applied to work on tunnels and chambers, rippability, excavatability, hydraulic erodibility, and seismic stability of roof-rock. The Unified Rock Classification System (URCS)8212;This system has been applied to work on foundations, methods of excavation, slope stability, uses of earth materials, blasting characteristics of earth materials, and transmission of ground water. The Rock Material Field Classification System (RMFCS)8212;This system has been used mainly for applications involving shallow excavation, particularly with regard to hydraulic erodibility in earth spillways, excavatability, construction quality of rock, fluid transmission, and rock-mass stability (11). The New Austrian Tunneling Method (NATM)8212;This system is used for both conventional (cyclical, such as drill-and-blast) and continuous (tunnel-boring machine or TBM) tunneling. This is a tunneling procedure in which design is extended into the construction phase by continued monitoring of rock displacement. Support requirements are revised to achieve stability (6). Note 28212;The Austrian code (7) specifies methods of payment based on coding of excavation volume and means of support. The Coal Mine Roof Rating (CMRR)8212;This system applies to bedded coal-measure rocks, in particular with regard to their structural competence as influenced by discontinuities in the rock mass. The basic building blocks of CMRR are unit ratings. The units are rock intervals defined by their geotechnical properties, and are at least 0.15 m (6 in.) thick. The unit ratings are combined into roof ratings, using additional geotechnical characteristics (8). Japanese Rock Mass Classification Systems8212;The Japanese Society of Engineering Geology has recognized seven major classification systems in use in Japan (9). These are summarized in 4.1.8.1-4.1.8.7, without additional details in this guide. Rock-Mass Classification for Railway Tunnels by Railway Technical Research Institute8212;Rock-masses are classified based on the values of P-wave velocity, unconfined compressive strength and unit weight. Support patterns for tunnels, such as shotcreting and rock bolting, is recommended depending upon the rock-mass classification obtained. Rock-Mass Classification for Tunnels and Slopes by Japan Highway Public Corporation8212;This system classifies the rock-mass using RQD, P-wave velocity, unconfined compressive strength and unit weight. Rock-Mass Classification fo......

Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes

NF B10-602-8:2007 烧结石料.试验方法.第8部分:固定阻力的测定(定位销孔)

Agglomerated stone - Test methods - Part 8 : determination of resistance to fixing (dowel hole).

KS F 2532-2007 沥青表面处理用碎石、碎渣和石料

이 규격은 아스팔트 표면 처리용 부순 골재, 부순 슬래그 및 골재의 품질에 대하여 규정한다

Crushed stone, crushed slag and gravel for single or multiple bituminous surface treatments

KS F 2516-2007 粗集料中软石粉末含量测定方法.划痕试验

이 규격은 굵은 골재에 포함되는 연석량을 긁기 경도를 기준으로 하여 시험하는 방법에 대하여

Method of test for content of soft particles in coarse aggregate by scratching

BS EN 14617-8:2007 烧结石料.试验方法.固定阻力的测定(定位销孔)

This European Standard specifies a test method to determine the breaking load at the dowel hole of agglomerated stones slabs used for cladding or lining in buildings.

Agglomerated stone. Test methods. Determination of resistance to fixing (dowel hole)

JC/T 1050-2007 地面石材防滑性能等级划分及试验方法

本标准规定了地面石材防滑性能等级及试验方法。进行防滑处理后的石材也可参照采用。 本标准适用于试验室和现场的测试。 本标准不适用于工业劳动区域及被污染的区域。

Classification and test method of slip resistance for ground stones

JC/T 1049-2007 超薄天然石材型复合板

本标准规定了超薄天然石材型复合板（以下简称复合板）的定义、产品分类、技术要求、试验方法、检验规则、标志、包装、运输与贮存等。 本标准适用于建筑装饰用超薄天然石材型复合板。

Complex veneer super thin stone