Q21 石材制品 标准查询与下载

JC/T 2087-2011 建筑装饰用仿自然面艺术石

本标准规定了建筑装饰用仿自然面艺术石(以下简称艺术石)的术语和定义、分类和标记、要求、试验方法、检验规则以及标志、包装、运输与贮存等。 本标准适用于以硅酸盐水泥、轻质骨料为主要原料经浇铸成型的饰面装饰材料。

Man-made art-stone for building decoration

JC/T 204-2011 天然花岗石荒料

本标准规定了天然花岗石荒料（以下简称荒料）产品的术语和定义、分类、等级与标记、要求、试验方法、检验规则、标志、运输、贮存与交货等。 本标准适用于具有直角六面体形状的天然花岗石荒料，其他用途的天然花岗石石料可参照执行。

Quarry stone of natural granite

BS EN 771-6:2011 砖石工程砌块规范.第6部分:天然石料砖石工程砌块

Specification for masonry units. Natural stone masonry units

BS EN 771-5:2011 砌块规范.人工石料砌块

Specification for masonry units. Manufactured stone masonry units

NF P32-203-2*NF EN 12326-2:2011 搭接屋顶和覆面用石板和石材.第2部分:板岩和盐酸盐岩的测试方法.

Slate and stone for discontinuous roofing and external cladding - Part 2 : methods of test for slate and carbonate slate.

DIN EN 12326-2:2011 不连续屋顶材料和外部覆面用石板和石材.第2部分:石板和碳酸盐石板的试验方法;德文版本EN 12326-2-2011

Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate; German version EN 12326-2:2011

NF P12-121-6:2011 砌筑块材规范.第6部分:天然石料砌块.

Specification for masonry units - Part 6 : natural stone masonry units.

BS EN 12326-2:2011 不连续屋面和外部覆层用石板和石头.石板岩和碳酸盐岩试验方法

This European Standard specifies test methods for slate and carbonate slate for roofing and wall cladding. It is applicable to natural roofing products as defined in EN 12326-1:2004 used for assembly into discontinuous roofs and external wall cladding. NOTE Where the term "slate" is used in this document it means slate and carbonate slate unless otherwise indicated.

Slate and stone for discontinuous roofing and external cladding. Methods of test for slate and carbonate slate

DIN EN 771-5:2011 砌块产品规范.第5部分:人造石料砌块;德文版本EN 771-5-2011

This European Standard specifies the characteristics and performance requirements of manufactured stone masonry units for which the main intended uses are facing or exposed masonry in load bearing or non load bearing building and civil engineering applications. The units are suitable for all forms of coursed or random masonry walling, including single leaf, cavity, partition, retaining and the external masonry to chimneys. They can provide fire protection, thermal insulation, sound insulation all forms of walling including single leaf, cavity, partitions, retaining, basement and general use below ground level, including walling for fire protection, thermal insulation, sound insulation and sound absorption.

Specification for masonry units - Part 5: Manufactured stone masonry units; German version EN 771-5:2011

DB35/T 1156-2011 人造花岗石建筑板材

本标准规定了人造花岗石建筑板材的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于建筑室内外装饰用人造花岗石建筑板材。

Artificial Granite Building Slabs

DB35/T 1157-2011 人造大理石建筑板材

本标准规定了橄榄[Caaariuffl album (Lour.) Rauesch.]种质资源鉴定的技术要求和方法。 本标准适用于橄榄[Ca/arium album (Lour.) auesch.]种资资源的植物学特征、生物学特性、果实性状的鉴定，亦可供橄榄属其他种的资源鉴定参照执行。

Artificial marble building board

DIN EN 771-6:2011 砌块规范.第6部分:天然石砌块;德文版本EN 771-6-2011

This European Standard specifies the characteristics and performance requirements of masonry units manufactured from natural stone the width of which is equal to or greater than 80 mm, for which the main intended uses are common, facing or exposed masonry units in load bearing or non load bearing building and civil engineering applications. These units are suitable for all forms of coursed or random masonry walling, including single leaf, cavity, partition, retaining and the external masonry to chimneys. They can provide fire protection, thermal insulation, sound insulation and sound absorption.

Specification for masonry units - Part 6: Natural stone masonry units; German version EN 771-6:2011

JG/T 328-2011 建筑装饰用石材蜂窝复合板

本标准规定了建筑装饰用石材蜂窝复合板的术语和定义、分类和标记、材料、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于建筑幕墙及其他装饰用石材蜂窝板。

Stone face honeycomb composite panel for building decoration

NF B10-640:2011 天然石材试验方法.热循环产生的外观变化的敏感性测定.

Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles.

DIN EN 16140:2011 天然石试验方法.热循环导致的外表变化的敏感性测定;德文版本EN 16140-2011

This European Standard specifies a method to assess possible alterations of natural stones (mainly visible sensitivity to oxidation processes) under the effect of thermal cycles (thermal shock).

Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles; German version EN 16140:2011

BS EN 16140:2011 天然石材试验方法.测定热循环引起的外观变化敏感度

This European Standard specifies a method to assess possible alterations of natural stones (mainly visible sensitivity to oxidation processes) under the effect of sudden changes in temperature (thermal shock).

Natural stone test methods. Determination of sensitivity to changes in appearance produced by thermal cycles

ASTM C1515-11 新建或已建外部规格石块垂直及水平的表面清洁的标准指南

Exterior dimension stone is chosen for use in contemporary architecture in part because of its aesthetic appeal. Aesthetics can be significantly diminished when dirt, grime, fly ash, algae and other contaminants collect on the surface of stone. This guide is intended to assist those who wish to preserve the original appearance of a new structure or to return a stone-clad building to its original color and appearance. Note that cleaning may not be able to return discolored or faded stone to its original appearance. This guide may be used as a construction document.1.1 This guide describes materials and procedures which may be used to clean dimension stone exteriors as well as the conditions under which they may be used. It is intended to aid owners, maintenance supervisors and building managers, architects and engineers, and contractors in cleaning vertical exterior dimension stone on commercial, residential and institutional structures. This guide may also be helpful to those who wish to clean stone masonry on bridges, retaining walls, ramps, and plazas, and free-standing stone objects such as statuary, memorials and grave markers. 1.2 This guide relates primarily, to routine maintenance of the surface finish of exterior dimension stone. The techniques noted herein may not be appropriate or cost effective with regard to restoration of disfigured, severely soiled or stained stonework, or of stonework of particular historic importance. In cases where staining occurs on surfaces which have cultural, civic, historic or architectural significance, consultation with a specialist is recommended. 1.3 The user of this guide should also obtain and have on file at both the job site and the office Material Safety Data Sheets (MSDS) describing the nature of all chemical products utilized during the cleaning process. 1.4 A file of literature from the manufacturers of all products involved within the scope of each project should be available for reference. 1.5 These procedures are not intended for interior stonework. 1.6 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing

ASTM C1496-11 规格石块砌体墙和立面评估及维护标准指南

This guide attempts to provide information to assist building owners and managers with limited knowledge of stone construction to recognize basic problems with performance of facades, and to keep them in good condition through periodic inspections and maintenance. Increased awareness of the behavior of stone masonry facades and associated materials can reduce maintenance and replacement costs by addressing problems and deterioration early. The objective of all maintenance should be to limit deterioration through early intervention. When it appears damage to stone support elements has occurred, professionals should be consulted to evaluate the support conditions, as well as recommend methods to restore the building''s integrity and preserve public safety.1.1 This guide outlines how to visually assess exterior stone masonry walls and facades to determine their general condition. Examining key features of the construction can help identify and diagnose problems which require repairs or corrective action. Such an examination can expose conditions which may be addressed with maintenance and minor repairs, or may require expert assistance. This guide is not intended to be used for buildings requiring major exterior rehabilitation or structural repairs. 1.1.1 This guide applies to walls of solid stone or dimension stone used as a cladding. Stone cladding is typically connected to a backup material with a variety of anchoring methods, including traditional hand-set masonry anchors such as straps, dowels, cramps, hook-and-eyes, dove-tails, wire ties, and the like. Joints between stones in these types of buildings are usually filled with mortar or sealant. Sealant-filled joints are usually designed to accommodate structural and thermal movements. 1.2 This guide specifically excludes dimension stone used in interior building surfaces, flooring or paving, slate dimension stone used as roofing. Though they share some similar assessment and maintenance concerns, thin stone (less than 2 in. nominal thickness) exterior cladding, and stone cladding attached to metal flames are also excluded due to their unique design characteristics and performance requirements. Although procedures and cautions listed herein may apply to walls and facades containing semi-dimension, or partially sized, stone in the form of split-face, or rubble and to stone-facade concrete panels, the guide is not specifically directed to such stone use. It does not address removal of small-area stains. 1.3 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades

ASTM C1722-11 修补及恢复规格石块的标准指南

The purpose of this guide is to assist those who wish to restore facades constructed of or finished with dimension stone. It is an aid to owners, building managers, architects, engineers, contractors and others involved with restoring dimension stone. This guide is not meant to supersede manufacturers'' directions and recommendations for the use of their specific products, or written directions from the architect or building owner. When manufacturers'' directions are in conflict with this guide, follow their recommendations or consult with their technical staff for further direction. Prior to undertaking a full-scale repair or cleaning procedure, the methods under consideration for repair, patching or cleaning should be tested on an area not easily visible or on sample stones. The test will assist in judging the effectiveness of the chosen method and permit assessment of potential damage to the building stone. Completely evaluate the success of the sample repairs before undertaking the full-scale cleaning or repair procedure.1.1 This guide describes materials and procedures for restoring facades constructed of or finished with dimension stone. All of the materials, procedures, and principles are suitable for restoration of historic and nonhistosric structures. 1.2 This guide is not intended to address restoration of interior dimension stone, although many of the materials and procedures may be suitable for interior use. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Repair and Restoration of Dimension Stone

ASTM C1527/C1527M-11(2018) 石灰华尺寸石的标准规格

1.1 This specification covers the material characteristics, physical requirements, and sampling appropriate to the selection of travertine for general building and structural purposes. Refer to Guides C1242 and C1528 for the appropriate selection and use of travertine dimension stone. 1.2 Dimension travertine shall include stone that is sawed, cut, split, or otherwise finished or shaped and shall specifically exclude molded, cast, or otherwise artificially aggregated units composed of fragments, and also crushed and broken stone. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Travertine Dimension Stone