Q34 工业技术玻璃 标准查询与下载

JC/T 2455-2018 建筑用电加温玻璃

本标准规定了建筑用电加温玻璃的术语和定义、分类、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于建筑用具有电加热功能的玻璃制品。

Electrically heated glazing material in building

JC/T 2394-2017 模具用玻璃

Glass for molds

JC/T 2388-2016 自洁隔热平板镀膜玻璃

Self-cleaning insulated flat coated glass

ISO 3917:2016 道路车辆 安全玻璃材料 耐辐射、耐高温、耐湿度、耐燃烧和耐模拟气候的试验方法

Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering

KS L 2408-2015 玻璃杯

Glass tumblers

KS L 2501-2015 玻璃瓶

Glass bottle

JC/T 2304-2015 建筑用保温隔热玻璃技术条件

本标准规定了建筑用保温隔热玻璃的术语和定义、分类、分级、标记、要求和试验方法。 本标准适用于符合建筑节能要求的保温隔热玻璃的分级、评价及应用选型。

The technical specification of energy efficient glass for building

GOST EN 14179-1-2015 热浸热钢化玻璃. 规格

Heat soaked thermally toughened glass. Specifications

GOST 33575-2015 自清洁镀膜玻璃. 规格

Self-cleaning coated glass. Specifications

GOST EN 14179-2-2015 热浸热钢化玻璃. 合格评定

Heat soaked thermally toughened glass. Evaluation of conformity

JC/T 2284-2014 空心玻璃微珠抗等静压强度(水压法)、吸油率及漂浮率的测定方法

本标准规定了空心玻璃微珠抗等静压强度(水压法)、吸油率及漂浮率测试中涉及的术语和定义、取样、试验条件、抗等静压强度(水压法)的测定、吸油率的测定、漂浮率的测定以及试验报告。本标准适用于空心玻璃微珠抗等静压强度(水压法)、吸油率及漂浮率的测定,其他空心微珠也可参照使用。

Test methods of isostatic compression strength (hydrostatic collapse strength), oil absorption and floatation ratio for hollow glass microspheres

JIS R 3301:2014 交通色漆用玻璃微珠

Glass beads for traffic paint

JC/T 2202-2014 注塑包边钢化玻璃

本标准规定了注塑包边钢化玻璃的术语和定义、材料、要求、试验方法、检验规则以及包装、标志、运输和贮存。本标准适用于家用电器用注塑包边钢化玻璃,其他应用可参照本标准。

Peripheral injection molding safety glass unit

GOST 30826-2014 夹层玻璃. 规格

Laminated glass. Specifications

ASTM E2269-14 采用气相色谱法测定密封绝缘玻璃组件中氩浓度的标准试验方法

4.1 This test method is intended to provide a means for determining the concentration of argon, oxygen, and nitrogen gases in individual sealed insulating glass units, which were intended to be filled with a specific concentration of argon at the time of manufacture. 4.2 The argon, oxygen, and nitrogen are physically separated by gas chromatography and compared to corresponding components separated under similar conditions from a reference standard mixture or mixtures of known composition. 4.3 The composition of the sample is calculated from the chromatogram by comparing the area under the curve of each component with the area under the curve of the corresponding component on the reference standard chromatogram. 4.4 It is essential that the person or persons performing this test are very knowledgeable about the principles and techniques of gas chromatography, operation and calibration of gas chromatographs. More information can be found in Practice E355. 4.5 It takes time for the fill gas to equilibrate in any insulating glass unit. This is particularly important in insulating glass units using a tubular spacer and in units containing interior components such as tubular muntin bars. Performing this test before a unit has equilibrated could result in fill gas concentrations that are measurably different than the actual fill gas concentration. 4.6 This method may be used to determine the initial argon gas concentration achieved by the filling method, or the argon gas concentration in units which have been in service or which have been subjected to durability tests such as those described in Test Methods E773 and E2188. 4.7 This method is not applicable to units filled with mixtures of argon and gases other than air. 4.8 This is a destructive test method in that the edge seal of the insulating glass unit is breached in order to obtain a gas sample for analysis by gas chromatography. 4.9 The argon concentration in the gas fill is part of the information necessary to estimate the thermal performance of the sealed insulating glass unit.Note 1—Other data necessary include gap width, glass thickness, coating type, film coefficients, and so forth, but are beyond the scope of this standard. 1.1 This test method covers procedures for using gas chromatographs to determine the concentration of argon gas in the space between the panes of sealed insulating glass. 1.2 This test method is not applicable to insulating glass units containing open capillary/breather tubes. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography

JC/T 185-2013 光学石英玻璃

本标准规定了光学石英玻璃的术语和定义、产品分类、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于光在同一方向通过的光学石英玻璃。

Optical quartz glass

JC/T 2170-2013 太阳能光伏组件用减反射膜玻璃

本标准规定了太阳能光伏组件用减反射膜玻璃(以下简称减反射膜玻璃)的术语和定义、材料、要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于晶体硅太阳能光伏组件用单面减反射膜玻璃，其他太阳能光伏组件用减反射膜玻璃可参考本标准。

Anti-reflective coated glass for photovoltaic modules

JC/T 2168-2013 自洁净镀膜玻璃

本标准规定了自洁净镀膜玻璃的术语和定义、分类、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于建筑、汽车和太阳电池等使用的自洁净镀膜玻璃。其他领域使用的自洁净镀膜玻璃可参照本标准。

Self-cleaning coated glass

ASTM E2927-13 鉴识比较用激光烧蚀感应耦合等离子体质谱法测定钠钙玻璃样品微量元素的标准试验方法

4.1 This test method is useful for the determination of elemental concentrations in the microgram per gram (µgg-1) to percent (%) levels in soda-lime glass samples. A standard test method can aid in the interchange of data between laboratories and in the creation and use of glass databases. 4.2 The determination of elemental concentrations in glass provides high discriminating value in the forensic comparison of glass fragments. 4.3 This test method produces minimal destruction of the sample. Microscopic craters of 50 to 100 µm in diameter by 80 to 150-µm deep are left in the glass fragment after analysis. The mass removed per replicate is approximately 0.4 to 3.1 µg. 4.4 Appropriate sampling techniques should be used to account for natural heterogeneity of the materials at a microscopic scale. 4.5 The precision, accuracy, and limits of detection of the method (for each element measured) should be established in each laboratory that employs the method. The measurement uncertainty of any concentration value used for a comparison should be recorded with the concentration. 4.6 Acid digestion of glass followed by either Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) or Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) may also be used for trace elemental analysis of glass, and offer similar detection levels and the ability for quantitative analysis. However, these methods are destructive, and require larger sample sizes and much longer sample preparation times (Test Method E2330). 4.7 Micro X-Ray Fluorescence (µ-XRF) uses comparable sample sizes to those used for LA-ICP-MS with the advantage of being non-destructive of the sample. Some of the drawbacks of µ-XRF are poorer sensitivity and precision, and longer analysis time. 4.8 Scanning Electron Microscopy with EDS (SEM-EDS) is also available for elemental analysis, but it is of limited use for forensic glass source discrimination due to poor detection limits for higher atomic number elements present in glass at trace concentration levels. However, distinguishing between sources having similar RIs and densities is possible. 1.1 This test method covers a procedure for the quantitative elemental analysis of the following seventeen elements: lithium (Li), magnesium (Mg), aluminum (Al), potassium (K), calcium (Ca), iron (Fe), titanium (Ti), manganese (Mn), rubidium (Rb), strontium (Sr), zirconium (Zr), barium (Ba), lanthanum (La), cerium (Ce), neodymium (Nd), hafnium (Hf) and lead (Pb) through the use of Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) for the forensic comparison of glass fragments. The potential of these elements to provide the best discrimination among different sources of soda-lime glasses has been published elsewhere (1-5).2 Silicon (Si) is also monitored for use as an internal standard. Additional elements can be added as needed, for example, tin (Sn) can be used to monitor the orientation of float glass fragments. 1.2 The method only consumes approximately 0.4 to 2 g of glass per replicate and is suitable for the analysis of full thickness samples as well as irregularly shaped fragments as small as 0.1 mm by 0.4 mm in dimension. The concentrations of the elements ......

Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons

JC/T 2131-2012 吸油烟机用钢化玻璃

本标准规定了吸油烟机用钢化玻璃的术语和定义、分类、材料、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于家用吸油烟机用钢化玻璃，其中对吸油烟机用釉面钢化玻璃的要求仅适用于采用高温釉的吸油烟机用钢化玻璃。

Tempered glass used on range hoods