Q45 定型隔热耐火材料 标准查询与下载

KS L 3206-2007 铬、镁质砖

이 규격은 크롬 철광과 마그네시아 원료로 제조한 내화 벽돌(이하, 크롬ㆍ마그네시아 벽돌이라

Chrome-Magnesia brick

KS L 3301-2007 绝热耐火砖

이 규격은 내화 단열 벽돌에 대하여 규정한다.

Insulating fire bricks

KS L 3309-2007 铬砖

이 규격은 크롬 철광을 주원료로 한 크롬 벽돌에 대하여 규정한다.

Chrome brick

KS L 3310-2007 镁砖

이 규격은 마그네시아질을 주원료로 한 마그네시아 벽돌에 대하여 규정한다.

Magnesia brick

KS L 3311-2007 化学工业用耐酸耐热砖

이 규격은 화학 공업용으로 사용하는 내산 내열 벽돌(이하 벽돌이라 한다.)에 대하여 규정한

Acid and heat resisting bricks for chemical industry

DIN 1082-4:2007 耐火材料.第4部分:转炉用耐火拱砖.尺寸

Refractory materials - Part 4: Refractory arch bricks for use in rotary kilns - Dimensions

ASTM C67-07 砖块和粘土空心砖取样和试验用标准试验方法

1.1 These test methods cover procedures for the sampling and testing of brick and structural clay tile. Although not necessarily applicable to all types of units, tests include modulus of rupture, compressive strength, absorption, saturation coefficient, effect of freezing and thawing, efflorescence, initial rate of absorption and determination of weight, size, warpage, length change, and void area. (Additional methods of test pertinent to ceramic glazed facing tile are included in Specification C 126.) 1.2 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.The testing laboratory performing this test method should be evaluated in accordance with Practice C 1093.1.3 Unless otherwise indicated, the values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

ASTM C67-07a 砖块和粘土空心砖取样和试验用标准试验方法

1.1 These test methods cover procedures for the sampling and testing of brick and structural clay tile. Although not necessarily applicable to all types of units, tests include modulus of rupture, compressive strength, absorption, saturation coefficient, effect of freezing and thawing, efflorescence, initial rate of absorption and determination of weight, size, warpage, length change, and void area. (Additional methods of test pertinent to ceramic glazed facing tile are included in Specification C 126.) 1.2 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.Note 1 - The testing laboratory performing this test method should be evaluated in accordance with Practice C 1093.1.3 Unless otherwise indicated, the values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

KS L 3138-2006 过滤用黏土质陶砖

이 규격은 여과용 비트리파이드 점토 블록에 대하여 규정한다.

Vitrified clay filter block

JIS R 2301 AMD 1:2006 铬砖(修改件1)

JIS R 2301:1995を，次のように改正する。

Chrome brick (Amendment 1)

JIS R 2302 AMD 1:2006 镁氧砖(修改件1)

JIS R 2302:1995を。次のように改正する。

Magnesia brick (Amendment 1)

BS 4729:2005+A1:2016 特种形状和规格的粘土砖.建议

Clay bricks of special shapes and sizes - Recommendations

BS 4729:2005 特种形状和规格的粘土和硅酸盐砖.建议

This British Standard gives guidance for the dimensions of bricks, including those of special shape, made from clay and calcium silicate, traditionally used in the construction of brick masonry in the UK. Requirements for bricks are covered by BS EN 771 Parts 1 and 2. NOTE Derivation of dimensions of special shapes and typical examples of applications of special shapes are shown in Annex C (Figures C.1 and C.2 and Table C.1). Annex D gives recommendations for how the principles of the test methods in the BS EN 772 series of standards are to be applied to high density (HD) clay bricks conforming to BS EN 771-1:2003+A1:2005 with shapes as described in BS 4729. The properties covered are those required to enable the products to be characterized and CE marked. The table of requirements (reproduced from Table ZA.1.2 of BS EN 771-1:2003+A1:2005 together with an indication of the relevant clause in Annex D for such marking) is given in Annex I.

Clay and calcium silicate bricks of special shapes and sizes - Recommendations

ISO 5019-6:2005 耐火砖.尺寸.第6部分:吹氧炼钢转炉用碱性砖

This part of ISO 5019 specifies the dimensions of basic refractory bricks for use in oxygen steel-making converters. The calculated volume of each size of brick is shown, for information, in Table 1, and also the internal diameter of lining for which each size is suitable, if used alone. These diameters have been calculated with no allowance for joint thickness.

Refractory bricks - Dimensions - Part 6: Basic bricks for oxygen steel-making converters

DIN EN 993-15:2005 致密成型耐火制品的试验方法.第15部分:用热线(平行)测量法测定导热性

This document specifies a hot-wire (parallel) method for the determination of thermal conductivity of refractory products and materials. It is applicable to dense and insulating shaped products and to powdered or granular materials, for thermal conductivities of less than 25 W/m? The limits are imposed by the dimensions of the test pieces and higher thermal conductivities can be measured if larger pieces are used. Electrically conducting materials cannot be measured.#,,#

Methods of test for dense shaped refractory products - Part 15: Determination of thermal conductivity by the hot-wire (parallel) method; German version EN 993-15:2005

YB/T 5013-2005 焦炉用硅砖

本标准规定了焦炉用硅砖的分类、技术要求、试验方法、质量评定程序、标志、包装、运输、贮存及质量证明书。 本标准适用于焦炉用硅砖，也可用于炭素煅烧炉用硅砖。

Silica refractory bricks for coke oven

JIS R 2619 AMD 1:2005 隔热耐火砖断裂模数的测试方法(修改件1)

JIS R 2619:1995を.次のように改正する。

Testing method for modulus of rupture of insulating fire bricks (Amendment 1)

JIS R 2213 AMD 1:2005 耐火砖断裂模数的试验方法(修改件1)

この追補は,JIS R 2213:1995が、2005年3月20日付けで改正されたことに伴って発行されたものである。

Test method for modulus of rupture of refractory bricks (Amendment 1)

JC/T 978-2005 微纤维玻璃棉

本标准规定了微纤维玻璃棉的术语和定义、分类和标记、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于作为原材料制造铅酸蓄电池玻璃纤维隔板、滤纸、保温纸等。

Glass microfibers

ASTM C1261-05 住宅壁炉用火箱砖的标准规范

1.1 This specification covers brick intended for use as the lining in the fireboxes of residential fireplaces.1.2 Firebox brick are manufactured from clay, fire clay, shale, or similar naturally occurring earthy substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop a fired bond between the particulate constituents to provide the strength and durability requirements of this specification. Note 18212;Firebox brick are typically installed using ground fire clay mortar or refractory mortar. Mortar joints are typically 1/ 8 in. (3.2 mm) thick, just thick enough to accommodate dimensional variations in the firebox brick.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.4 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification.

Standard Specification for Firebox Brick for Residential Fireplaces