Q92 水泥与水泥制品设备 标准查询与下载

JC/T 920-2003 建材工业用砌块成型机

Architecture material industry block machine

JC/T 822-2003 水泥制品工业用离心成型机技术条件

本标准规定了水泥制晶工业用离心成型机的技术要求、 试验方法、 检验规则及标志、 包装、 贮存 和运输。 本标准适用于用离心工艺成型的水泥制品的离心成型机 。

Technical regulation of centrifugal machine for cement products industry

JC/T 922-2003 水泥工业用破碎机技术条件

Crusher technical condition in cement industry

JC/T 921-2003 蒸压加气混凝土切割机

Cutting machine for autoclaved aerated concrete

JC/T 919-2003 水泥工业用链条技术条件

Technical conditions of chains for cement industry

JC/T 918-2003 建材工业用滑槽式固体流量给料机

Chute solids flow feeder in building meterial industry

JC/T 917-2003 建材工业用带式定量给料机

本标准规定了建材工业用带式定量给料机的术语和定义、产品分类、要求、试验方法、检验规则 及标志、包装、运输和贮存。 本标准适用于固体散状物料连续输送称量并定量给料的建材工业用带式定量给料机 (以下简称定 BEAL).

Belt weighfeeder in building material industry

JC/T 916-2003 建材工业用滑槽式固体流量计

Chute solids flow meter in building material industry

BS EN 12629-8:2002 生产混凝土和硅酸钙建筑产品用设备.安全.生产硅酸钙(和混凝土)建筑产品用机器和设备

1 This European Standard applies to hydraulic machines for the manufacture of bricks, blocks and elements of calcium-silicate (as illustrated in annexes A and B). NOTE Calcium-silicate can be replaced by concrete. 2 This European Standard deals with all significant hazards pertinent to these machines, when used as intended under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risk arising from significant hazards. 3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1 at annex A, B) until the point where the green products are removed from the machine to the curing system (see point 2 of annex A, B). 4 This European standard does not cover those requirements for reducing hazards from mechanical, electrical, pneumatic, hydraulic or other equipment or machinery that are dealt with in standards for their common use (Type A, B1 and B2 standards). 5 This European Standard deals with the hazards other than noise hazards listed in clause 4 which can arise during the operation and maintenance, including the interfaces, of machines for the manufacture of constructional products from calcium-silicate, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. NOTE 1 Amendment is under preparation to deal with noise, in particular for measures to reduce noise at source and a noise test code including noise declaration. NOTE 2 Interfaces between the machines for the manufacture of constructional products from calcium-silicate and others of the installation are dealt with in 7.2 of EN 12629-1:2000. This standard establishes safety requirements and/or methods of protection which apply to these machines. At this time, noise hazard and vibration hazard are considered as not significant for those machines. 6 The provisions stated in this standard assume that all operators have been adequately informed and trained. note:1) Until a noise test code (dealing with the measurement and declaration of noise emission values) specific to the machines covered by this part is available to complement the requirements of 5.7.2 and 7.4.2 of EN 12629-1:2000, it cannot be considered that noise hazards are covered.

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)

BS EN 12629-8:2003 生产混凝土和硅酸钙建筑产品用设备.安全.生产硅酸钙(和混凝土)建筑产品用机器和设备

1 This European Standard applies to hydraulic machines for the manufacture of bricks, blocks and elements of calcium-silicate (as illustrated in annexes A and B). NOTE Calcium-silicate can be replaced by concrete. 2 This European Standard deals with all significant hazards pertinent to these machines, when used as intended under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risk arising from significant hazards. 3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1 at annex A, B) until the point where the green products are removed from the machine to the curing system (see point 2 of annex A, B). 4 This European standard does not cover those requirements for reducing hazards from mechanical, electrical, pneumatic, hydraulic or other equipment or machinery that are dealt with in standards for their common use (Type A, B1 and B2 standards). 5 This European Standard deals with the hazards other than noise hazards listed in clause 4 which can arise during the operation and maintenance, including the interfaces, of machines for the manufacture of constructional products from calcium-silicate, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. NOTE 1 Amendment is under preparation to deal with noise, in particular for measures to reduce noise at source and a noise test code including noise declaration. NOTE 2 Interfaces between the machines for the manufacture of constructional products from calcium-silicate and others of the installation are dealt with in 7.2 of EN 12629-1:2000. This standard establishes safety requirements and/or methods of protection which apply to these machines. At this time, noise hazard and vibration hazard are considered as not significant for those machines. 6 The provisions stated in this standard assume that all operators have been adequately informed and trained. note:1) Until a noise test code (dealing with the measurement and declaration of noise emission values) specific to the machines covered by this part is available to complement the requirements of 5.7.2 and 7.4.2 of EN 12629-1:2000, it cannot be considered that noise hazards are covered.

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)

BS EN 12629-2:2003 生产混凝土和硅酸钙建筑产品用设备.安全.压块机

1 This European Standard applies to machines for the manufacture of blocks, kerbs, paving stones and similar concrete products. 2 This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. 3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1-2 of annex B) and the point where the pallet boards are brought to the assembly (see point 3 of annex B) until the point where the green products are removed from the machine assembly to the curing system (see point 4 of annex B). 4 This European standard does not cover those requirements for reducing hazards from mechanical, electrical, pneumatic, hydraulic or other equipment or machinery that are dealt with in standards for their common use (Type A, B1 and B2 standards). 5 This European Standard deals with the hazards other than noise hazards listed in clause 4 which can arise during the operation and maintenance, including the interfaces, of the block making machines, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. NOTE 1 Amendment is under preparation to deal with noise, In particular for measures to reduce noise at source and a noise test code including noise declaration. NOTE 2 Interfaces between the block making machines and others of the installation are dealt with in EN 12629-1:2000 (subclause 7.2). This standard establishes safety requirements and/or methods of protection which apply to these machines. 6 The provisions stated in this standard assume that all operators have been adequately informed and trained. note:1) Until a noise test code (dealing with the measurement and declaration of noise emission values) specific to the machines covered by this part is available to complement the requirements of 5.7.2 and 7.4.2 of EN 12629-1:2000, it cannot be considered that noise hazards are covered.

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Block making machines

BS EN 12629-2:2002+A1:2010 生产混凝土和硅酸钙建筑产品用设备.安全性.压块机

1.1 This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for the manufacture of blocks, kerbs, paving stones and similar concrete products. EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium–silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers. 1.2 This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. 1.3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1-2 of annex B) and the point where the pallet boards are brought to the assembly (see point 3 of annex B) until the point where the green products are removed from the machine assembly to the curing system (see point 4 of annex B). 1.4 This European Standard deals with the hazards !deleted text" listed in clause 4 which can arise during the operation and maintenance, including the interfaces, of the block making machines, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. 1.5 This document is not applicable to block making machines, which are manufactured before the date of publication of this document by CEN.

Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Block making machines

BS EN 12629-8:2002+A1:2010 生产混凝土和硅酸钙建筑产品用设备.安全性.生产硅酸钙(和混凝土)建筑产品用机器和设备

1.1 This part of EN 12629, taken together with EN 12629-1:2000+A1:2010 applies to hydraulic machines for the manufacture of bricks, blocs and elements of calcium-silicate (as illustrated in Annexes A and B). EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium–silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers. 1.2 This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. Noise hazard and vibration hazard are considered as not significant for those machines. 1.3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1 at annex A, B) until the point where the green products are removed from the machine to the curing system (see point 2 of annex A, B). !deleted text" 1.4 !This document is not applicable to machines and equipment for the manufacture of constructional products from calcium silicate (and concrete), which are manufactured before the date of publication of this document by CEN.

Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)

BS EN 12629-2:2002 生产混凝土和硅酸钙建筑产品用设备.安全.压块机

1 This European Standard applies to machines for the manufacture of blocks, kerbs, paving stones and similar concrete products. 2 This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. 3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1-2 of annex B) and the point where the pallet boards are brought to the assembly (see point 3 of annex B) until the point where the green products are removed from the machine assembly to the curing system (see point 4 of annex B). 4 This European standard does not cover those requirements for reducing hazards from mechanical, electrical, pneumatic, hydraulic or other equipment or machinery that are dealt with in standards for their common use (Type A, B1 and B2 standards). 5 This European Standard deals with the hazards other than noise hazards listed in clause 4 which can arise during the operation and maintenance, including the interfaces, of the block making machines, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. NOTE 1 Amendment is under preparation to deal with noise, In particular for measures to reduce noise at source and a noise test code including noise declaration. NOTE 2 Interfaces between the block making machines and others of the installation are dealt with in EN 12629-1:2000 (subclause 7.2). This standard establishes safety requirements and/or methods of protection which apply to these machines. 6 The provisions stated in this standard assume that all operators have been adequately informed and trained. note:1) Until a noise test code (dealing with the measurement and declaration of noise emission values) specific to the machines covered by this part is available to complement the requirements of 5.7.2 and 7.4.2 of EN 12629-1:2000, it cannot be considered that noise hazards are covered.

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Block making machines

BS EN 12629-3:2003 生产混凝土和硅酸钙结构件的设备.安全.滑动和绞盘机

1 This European Standard applies to machines for the manufacture of constructional products of calcium silicate or concrete, where the mould(s) is (are) mounted on a turning or slide moving table. The motive power for compressing the mixture is effected either mechanically (annexes A, B), or hydraulically (annexes C and D). 2 This European Standard deals with the hazards listed in clause 4 of machines for the manufacture of constructional products from concrete and calcium silicate, when used as intended under the conditions foreseen by the manufacturer. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. 3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1 of annexes A, B, C, D) and the point where the pallets for concrete products are brought to the assembly (see point 8 at annexes C and D) until the point where the green products are removed from the machine to the curing system (see point 2 of annexes A, B, C, D). 4 This European standard does not cover those requirements for reducing hazards from mechanical, electrical, pneumatic, hydraulic or other equipment or machinery that are dealt with in standards for their common use (Type A, B1 and B2 standards). 5 This European Standard deals with the hazards listed in clause 4 which can arise during the operation and maintenance, including the interfaces, of the slide and turntable machines, when carried out in accordance with the specifications given by the manufacturer or his authorised representative, except noise hazards. NOTE Amendment is under preparation to deal with noise, in particular for measures to reduce noise at source and a noise test code including noise declaration. This standard establishes safety requirements and/or methods of protection which apply to these machines. 6 The provisions stated in this standard assume that all operators have been adequately informed and trained. note:1) Until a noise test code (dealing with the measurement and declaration of noise emission values) specific to the machines covered by this part is available to complement the requirements of 5.7.2 and 7.4.2 of EN 12629-1:2000, it cannot be considered that noise hazards are covered.

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Slide and turntable machines

BS EN 12629-3:2002 生产混凝土和硅酸钙结构件的设备.安全.滑动和绞盘机

1 This European Standard applies to machines for the manufacture of constructional products of calcium silicate or concrete, where the mould(s) is (are) mounted on a turning or slide moving table. The motive power for compressing the mixture is effected either mechanically (annexes A, B), or hydraulically (annexes C and D). 2 This European Standard deals with the hazards listed in clause 4 of machines for the manufacture of constructional products from concrete and calcium silicate, when used as intended under the conditions foreseen by the manufacturer. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. 3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1 of annexes A, B, C, D) and the point where the pallets for concrete products are brought to the assembly (see point 8 at annexes C and D) until the point where the green products are removed from the machine to the curing system (see point 2 of annexes A, B, C, D). 4 This European standard does not cover those requirements for reducing hazards from mechanical, electrical, pneumatic, hydraulic or other equipment or machinery that are dealt with in standards for their common use (Type A, B1 and B2 standards). 5 This European Standard deals with the hazards listed in clause 4 which can arise during the operation and maintenance, including the interfaces, of the slide and turntable machines, when carried out in accordance with the specifications given by the manufacturer or his authorised representative, except noise hazards. NOTE Amendment is under preparation to deal with noise, in particular for measures to reduce noise at source and a noise test code including noise declaration. This standard establishes safety requirements and/or methods of protection which apply to these machines. 6 The provisions stated in this standard assume that all operators have been adequately informed and trained. note:1) Until a noise test code (dealing with the measurement and declaration of noise emission values) specific to the machines covered by this part is available to complement the requirements of 5.7.2 and 7.4.2 of EN 12629-1:2000, it cannot be considered that noise hazards are covered.

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Slide and turntable machines

BS EN 12629-3:2002+A1:2010 生产混凝土和硅酸钙结构件的设备.安全性.滑动和绞盘机

1.1 This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for the manufacture of constructional products of calcium-silicate or concrete, where the mould(s) is(are) mounted on a turning or slide table. The motive power for compressing the mixture is effected either mechanically (Annexes A, B), or hydraulically (Annexes C and D). EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium–silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers. 1.2 !This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. 1.3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1 of annexes A, B, C, D) and the point where the pallets for concrete products are brought to the assembly (see point 8 at annexes C and D) until the point where the green products are removed from the machine to the curing system (see point 2 of annexes A, B, C, D). 1.4 This European Standard deals with the hazards listed in Clause 4 which can arise during the operation and maintenance, including the interfaces, of the slide and turntable machines, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This standard establishes safety requirements and/or methods of protection which apply to these machines." 1.5 This document is not applicable to side and turntable machines, which are manufactured before the date of publication of this document by CEN.

Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Slide and turntable machines

ASTM C511-03 水凝水泥和混凝土试验用搅拌室、湿气箱、湿气室和水贮存罐标准规范

1.1 This specification includes requirements for mixing rooms where paste and mortar specimens are prepared; and for moist cabinets, moist rooms, and water storage tanks where paste, mortar, and concrete specimens are stored.1.2 Values in SI units shall be obtained by measurement in SI units or by appropriate conversion, using the Rules for Conversion and rounding given in Standard IEEE/ASTM SI 10, of measurements made in other units.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

BS EN 12629-4:2001+A1:2010 混凝土和硅酸钙建材产品生产机械.安全性.混凝土和空心砖制造设备

This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to concrete roof tile making machines. EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium–silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers.

Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Concrete roof tile making machines

JC/T 825.3-2001 水泥工业用自动控制预加水成球装备双轴搅拌机

Automatic control pre-water ball equipment for cement industry-Double axis mixer