R16 公路车辆使用、维护与修理 标准查询与下载

DB11/T 135-2008 汽车发动机大修竣工出厂技术条件

本标准规定了汽车发动机大修竣工出厂的技术要求、检验方法和质量保证。 本标准适用于汽车汽油发动机和汽车柴油发动机。

Automobile engine overhaul completed factory technical conditions

JT/T 720-2008 汽车自动变速器维修通用技术条件

本标准规定了汽车自动变速器维修的技术要求和质量保证。 本标准适用于汽车自动变速器维修作业。

Currency technical request for the maintenance and repair of motor automatic transmission

JT/T 716-2008 发动机冷却系保护剂

本标准规定了用于以水为冷却介质的发动机冷却系保护剂的技术要求、试验方法、检验规则及标志、包装、运输和储存等要求。 本标准适用于发动机冷却系保护剂的生产和检验，以及作为维修企业选用发动机冷却系保护剂产品的技术依据。

Corrosion inhibitor for engine cooling system

BS CWA 15770:2008 汽车修理信息的模型设计.设备

Modelling for automotive repair information - Applications

BS PAS 90:2006 工业货车现场保养和维修安全操作实施规范

Specification for safe working practice for on-site maintenance and repair of industrial trucks

JT/T 325-2006 营运客车类型划分及等级评定

本标准规定了营运客车类型、等级划分及评定内容、规则和要求。 本标准适用于在道路上使用的经营性客车，是交通管理部门对其评级的依据。

Type dividing and class rating for commercial motor-vehicles of passenger transport

ISO/PAS 27145-2:2006 道路车辆.实施全球统一重型发动机认证规程(WWH-OBD)要求.第2部分:与普通排放相关的数据词典

ISO/PAS 27145 is intended to become the single communication standard for access to OBD-related information. To allow for a smooth migration from the existing communication standards to this future worldwide standardized communication standard, the initial communication concept will be based on CAN. In a second step, ISO/PAS 27145 will be extended to define the world-wide harmonized OBD communication standard based on existing industry communications standards (e.g. Internet Protocol) over Ethernet. Due to the usage of standard network layer protocols, future extensions to optional physical layers (e.g. wireless) are possible. This part of ISO/PAS 27145 defines all regulatory emissions-related data elements of ISO/PAS 27145. A new part may be added in the future upon availability of new legislated WWH-OBD GTR modules. The data elements are used to provide the external test equipment with the diagnostic status of the emissions-related system in the vehicle. All data elements are communicated with the unified diagnostic services as defined in ISO/PAS 27145-3. Data elements are Diagnostic Trouble Codes (DTCs), Parameter Identifiers (PIDs), Monitor Identifiers (MIDs), Test Identifiers (TIDs)/Routine Identifiers (RIDs) and InfoType Identifiers (ITIDs). This part of ISO/PAS 27145 defines three (3) different sets of data elements: a) A legacy (backward compatible) data set as defined in SAE J1939-71/-73 and ISO 15031-5/ISO 15031-6; b) A unified data set (new data definition according to ISO/PAS 27145-2); and c) A manufacturer data set (defined by manufacturer). Each set of data elements uses its own scaling and encoding scheme. Legacy data elements are scaled and encoded according the definitions in SAE J1939-71/-73 and ISO 15031-5/ISO 15031-6. Unified data elements are scaled and encoded according to the definitions in ISO/PAS 27145-2. Manufacturer data elements are recommended to be scaled and encoded according to the definitions of the unified data set. This will ease the transfer of manufacturer defined data elements into the standardized (unified) data range.

Road vehicles - Implementation of WWH-OBD communication requirements - Part 2: Common emissions-related data dictionary

ISO/PAS 27145-3:2006 道路车辆.全球统一的重型发动机认证规程(WWH-OBD)要求的实施.第3部分:通用信息词典

ISO/PAS 27145 is intended to become the single communication standard for access to OBD-related information. To allow for a smooth migration from the existing communication standards to this future worldwide standardized communication standard, the initial communication concept will be based on CAN. In a second step, ISO/PAS 27145 will be extended to define the world-wide harmonized OBD communication standard based on existing industry communications standards (e.g. Internet Protocol) over Ethernet. Due to the usage of standard network layer protocols, future extensions to optional physical layers (e.g. wireless) are possible. This part of ISO/PAS 27145 specifies the implementation of a subset of unified diagnostic services (UDS) as specified in ISO 14229-1. The diagnostic services are used to communicate all diagnostic data as defined in ISO/PAS 27145-2. The subset of unified diagnostic services derives from the requirements stated in the WWH-OBD GTR (World Wide Harmonised Global Technical Regulations). The common message set defined in this part is independent of the underlying Transport, Network, Data Link and Physical Layer. This document does not specify any requirements for the in-vehicle network architecture. This part of ISO/PAS 27145 includes a superset of a modified version of ISO 14229-1. Several significant modifications are included in this part in order to support the data set of SAE J1939, ISO 15031-5 and ISO 15031-6: ? ISO/PAS 27145-3 supports a 3-byte Unified Data Identifier format in all services which support a 2-byte data identifier format in the ISO 14229-1. ? ISO/PAS 27145-3 supports a 4-byte Diagnostic Trouble Code format in all services which support a 3-byte Diagnostic Trouble Code format in the ISO 14229-1. ? ISO/PAS 27145-3 supports a separation of BaseDTC number from a FailureTypeByte including the symptom of the Diagnostic Trouble Code. This part of ISO/PAS 27145 is designed to provide the basis of unified diagnostic services for future GTR modules provided by legislation.

Road vehicles - Implementation of WWH-OBD communication requirements - Part 3: Common message dictionary

SANS 10356:2005 越野车辆用重型无管和多片式钢轮的维修

Covers the requirements for the repair of heavy-duty tubeless and multi-piece steel wheels intended for off-road vehicles, including the requirements for wheel repair workshops and operational requirements for the repair.

The repair of heavy-duty tubeless and multi-piece steel wheels for off-road vehicles

JT/T 325-2004 营运客车类型划分及等级评定

Type dividing and class rating for commercial motor-vehicles of passenger transport

JT/T 512-2004 压缩天然气汽车维护、检测技术规范

本标准规定了压缩天然气(以下简称CNG)汽车维修企业具备的技术条件、CNG汽车维护、检测的周期、作业内容和技术要求。 本标准适用于CNG汽车，包括单一燃料CNG汽车和CNG/汽油两用燃料汽车。

Specification for the maintenance and inspection of compressed natural gas vehicle

JT/T 511-2004 液化石油气汽车维护、检测技术规范

本标准规定了液化石油气(以下简称LPG)汽车维修企业具备的技术条件、LP(〕汽车维护、检测的周期、作业内容和技术要求。 本标准适用于LPG汽车，包括单一燃料LPG汽车和LPG/汽油两用燃料汽车。

Specification for the maintenance and inspection of liquefied petroleum gas vehicle

JT/T 510-2004 汽车防抱制动系统检测技术条件

本标准规定了具有防抱制动装置的汽车制动系统的技术要求和检测方法。 本标准适用于在公路及城市道路上行驶的在用汽车。

Technical specifications for vehicles anti-lock braking systems test

JT/T 509-2004 轿车车身维护技术要求

本标准规定了轿车车身、底盘外表及发动机室外表维护的主要内容及工艺要求。 本标准适用于轿车。

Maintenance specification for passenger car body

JT/T 198-2004 营运车辆技术等级划分和评定要求

Dividing and rating requirements for technical classification of commercial vehicle

JT/T 497-2004 乘用车悬架特性的评定指标和检测方法

本标准规定了乘用车悬架特性的评定指标、检测和评定方法。 本标准适用于谐振式汽车悬架装置检测台和平板式检测台。

Evaluating index and Testing methods for suspension specificity of passenger car

DB35/T 164-2002 汽车维护工艺规范

本标准规定了汽车维护的分级、作业内容、工艺过程和质量保证期及汽车一级维护、二级维护周期的作业内容、工艺过程和质量保证期。

Automobile maintenance process specification

DB11/T 134-2001 汽车大修竣工出厂技术条件

本标准规定了汽车大修竣工出厂的技术条件。 本标准适用于大修竣工出厂的汽车(包括小轿车、客车和货车)。不包括轮式工程机械和特种专用车辆的设施及附属装备的修理。

Automobile overhaul completion factory technical conditions

JT/T 425-2000 汽车维修业质量检验人员技术水平要求

本标准规定了汽车维修质量检验人员(以下简称质检人员)应具备的理论水平和操作技能的要求。 本标准适用于汽车维修质检人员的培训和考核。

Technical standard requirement for technicians in charge of quality-inspection of auto maintenance and repair

SAE HS-2600-1999 可维修性,可修复性和可维护性标准手册,不包括图像,请参阅完整版

There has been increasing national and international awareness and concern about the limited nature of the world's natural resources, especially those used in the production of automotive products. This concern has been translated into conservation measures undertaken by the public, industry and government. Many of these measures have been directed at more efficient use and reuse of both raw and processed materials. In response SAE has greatly expanded established efforts, and initiated new efforts, for the development of Technical Reports (Standards, Recommended Practices, and Information Reports) pertaining to the maintainability, repairability, and serviceability of motor vehicles. These programs have related to all types of vehicles, include those operating on-highway off-highway, in the air and on water. Sections 2 and 5 of this SAE Manual provide compendia of reports on these subjects which have been produced by specialized committees functioning under the SAE Technical Board

Maintainability, Repairability, and Serviceability Standards Manual IMAGES ARE NOT INCLUDED; PLEASE REFER TO GLOBAL