S32 制动系统 标准查询与下载
共找到 384 条与 制动系统 相关的标准，共 26 页
This European Standard specifies the minimum criteria for system acceptance/type approval of a new wheel slide protection system and implementation of accepted WSP to specific vehicle applications and route requirements, as well as requirements for wheel rotation monitoring (WRM).. This includes the design, testing and quality assessment of the WSP system and its components. This European Standard is applicable to wheel slide protection systems for pneumatic braking systems without taking the type of vehicles and track-gauge into consideration. The general principles of this standard can also apply as a reference for other types of braking systems and other kinds of railway vehicles. The system is designed to control the sliding of wheels of railway vehicles during braking under degraded adhesion conditions to prevent wheel damage and to minimize the extension of the stopping distance under degraded adhesion conditions by optimizing the available adhesion between wheel and rail. This European Standard does not apply to the following categories of vehicles: 1) tramways; 2) light railways; 3) metros on steel wheels; 4) metros on rubber tyred wheels.
Railway applications. Braking. Wheel slide protection
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-04-30
- 实施
- 2009-04-30
This European Standard specifies the minimum criteria for system acceptance/type approval of a new wheel slide protection system and implementation of accepted WSP to specific vehicle applications and route requirements, as well as requirements for wheel rotation monitoring (WRM).. This includes the design, testing and quality assessment of the WSP system and its components. This European Standard is applicable to wheel slide protection systems for pneumatic braking systems without taking the type of vehicles and track-gauge into consideration. The general principles of this standard can also apply as a reference for other types of braking systems and other kinds of railway vehicles. The system is designed to control the sliding of wheels of railway vehicles during braking under degraded adhesion conditions to prevent wheel damage and to minimize the extension of the stopping distance under degraded adhesion conditions by optimizing the available adhesion between wheel and rail. This European Standard does not apply to the following categories of vehicles: 1) tramways; 2) light railways; 3) metros on steel wheels; 4) metros on rubber tyred wheels.
Railway applications - Braking - Wheel slide protection
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-04-30
- 实施
- 2009-04-30
Railway applications. Railway rolling stock. Buffers
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-04-30
- 实施
- 2009-04-30
Railway applications - Braking - Brake pipe accelerator valve.
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-04-01
- 实施
- 2009-04-18
Railway applications - Braking - Relay valves.
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-04-01
- 实施
- 2009-04-18
Railway applications. Braking. Empty-loaded changeover devices
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-03-31
- 实施
- 2009-03-31
Railway applications. Braking. Automatic variable load sensing devices
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-03-31
- 实施
- 2009-03-31
This European Standard is applicable to empty-loaded changeover devices designed to automatically sense when the load of a railway vehicle reaches a defined value (changeover mass), which represents the point at which the vehicle is classed as “loaded” and thereby requires the brake force to be adjusted accordingly to achieve the required brake performance. This European Standard also covers manually operated emptyloaded changeover devices and the associated changeover plates. This European Standard specifies the requirements for the design, dimensions, manufacture and testing of empty-loaded changeover devices.
Railway applications - Braking - Empty-loaded changeover devices
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-03-31
- 实施
- 2009-03-31
This European Standard specifies the requirements for the design, dimensions, performance and testing of single/double brake indicators with or without electrical contacts. It applies to pneumatically operated brake indicators visible from the outside of the vehicle. NOTE Brake indicators are for giving precise and accurate information about release and application of the brake. This European Standard applies to brake indicators on railway vehicles used on the main national networks, urban networks, underground railways, trams and private networks (regional railways, company railways etc.).
Railway applications - Brake indicators - Pneumatically operated brake indicators
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-03-31
- 实施
- 2009-03-31
This European Standard applies to automatic variable load sensing devices designed to continuously sense the load of a railway vehicle and provide a signal that can be used by a relay valve for the automatic variation of the air pressure used for brake application, thereby adjusting the brake force accordingly to achieve the required brake performance. This European Standard specifies the requirements for the design, dimensions, manufacture and testing of automatic variable load sensing devices.
Railway applications - Braking - Automatic variable load sensing devices
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-03-31
- 实施
- 2009-03-31
This European Standard specifies the requirements for the design, dimensions, performance and testing of single/double brake indicators with or without electrical contacts. It applies to pneumatically operated brake indicators visible from the outside of the vehicle. NOTE Brake indicators are for giving precise and accurate information about release and application of the brake. This European Standard applies to brake indicators on railway vehicles used on the main national networks, urban networks, underground railways, trams and private networks (regional railways, company railways etc.).
Railway applications. Brake indicators. Pneumatically operated brake indicators
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-03-31
- 实施
- 2009-03-31
Railway applications - Braking - Distributor valves and distributor-isolating devices.
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009-01-01
- 实施
- 2009-01-10
Connection brake pipe with electrocontact 369A. Specifications
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2009
- 实施
- 2010-01-01
This guide provides methods and assumptions used in calculating the braking distances of rail transit vehicles. The methods encompass automatic train protection and signal system operation, propulsion and brake system operation, environmental conditions, operator interfaces, toleraces, and failure modes.
Guide for the Calculation of Braking Distances for Rail Transit Vehicles
- ICS
- 45.060.10
- CCS
- S32
- 发布
- 2009
- 实施
Railway applications. Braking. Brake pipe accelerator valve
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2008-12-31
- 实施
- 2008-12-31
Railway applications. Braking. Relay valves
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2008-12-31
- 实施
- 2008-12-31
This European Standard is applicable to relay valves designed to control the brake cylinder pressure of compressed air brakes fitted to railway vehicles, in association with an air brake distributor valve or other control device, and in response to a change in vehicle load that is either continuously variable or in two stages i.e. empty - loaded. Relay valves operating with other pressures, in particular the brake pipe pressure, are not included. This European Standard specifies the requirements for the design, manufacture and testing of relay valves.
Railway applications - Braking - Relay valves
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2008-12-31
- 实施
State of railway vehicles - Brake - Part 2: Disc brake, mechanical part, Corrigendum to DIN 27205-2:2004
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2008-12
- 实施
This European Standard applies to distributor valves and distributor-isolating devices. The distributor valves contained in this European Standard are of graduated release type. Direct release types are not included. Functionally they are regarded as not containing relay valves of any type, even if the relay valves are physically an integral part of the distributor valves. This European Standard applies to both distributor-isolating devices mounted separate from the distributor valve and distributor-isolating devices integral with the distributor valve. This European Standard specifies the requirements for the design, testing and quality assurance of distributor valves and distributor-isolating devices. For interoperable freight wagons, these devices which are operated by compressed air according to EN 14198 are assessed according to the respective technical specification of interoperability.
Railway applications - Braking - Distributor valves and distributor-isolating devices
- ICS
- 45.060.01
- CCS
- S32
- 发布
- 2008-11-30
- 实施
- 2008-11-30
本标准规定了DK-1型机车电空制动机上用于机车制动缸压力控制的109型分配阀（以下简称配阀）的基本要求、外形与接口、性能要求、试验方法、检验规则及产品标志、包装和贮存等。 本部分适用于DK-1型机车电空制动机用109型分配阀的制造和检验。
DK-1 Electro-pneumatic brake for locomotives Part3:109 type distributing valve
- ICS
- 45.060.10
- CCS
- S32
- 发布
- 2008-10-14
- 实施
- 2009-03-01
