S32 制动系统 标准查询与下载

TB/T 3146.4-2008 DK-1型机车电空制动机.第4部分：其他阀类

本部分规定了DK-1型机车电空制动机用空气制动阀、中继阀、压力开关、紧急阀（以下简称其他阀类）的基本要求、外形与接口、性能要求、试验方法、检验规则及产品标志、包装和贮存等。 本部分适用于DK-1型机车电空制动机用其他阀类的制造和检验。

DK-1 Electro-pneumatic brake for locomotives Part4:Other valves

DIN 5589:2008 有轨车辆的压缩空气装置.带常规和固态敲击的安全阀.安装和连接尺寸及要求

Compressed air equipment for rail vehicles - Safety valves with normal and solid stroke - Mounting and connecting dimensions, requirements

GOST R 52929-2008 铁路牵引车辆.制动距离和停车制动的控制方法

Railway traction stock. Methods of controlling braking distance and parking brake

BS EN 15179:2007 轨道交通.制动系统.铁路客车制动系统用要求

This European Standard defines basic requirements for the braking of passenger coaches in trains hauled by locomotives as described in EN 14198, using UIC air brakes (RIC traffic) operating on routes of the European railways and their infrastructure systems. Normative Annex E is provided for passenger coaches limited to internal use in the UK. This European Standard covers: ¾ all new vehicle designs of the passenger coach type of construction (day coaches, restaurant cars, sleeper coaches, driving trailers, baggage cars, couchette coaches); ¾ all new constructions of existing vehicle types; ¾ other vehicles (e.g. motorail vehicles) that may also be included in passenger trains; ¾ all major overhauls of the above-mentioned vehicles if they involve redesigning or extensive alteration to the brake system1 of the vehicle concerned. The vehicles meet the following technical criteria: ¾ inclusion in trains in accordance with EN 14198 in regular railway operation is possible (coupling capacity); ¾ the maximum speed is between 100 km/h and 200 km/h; ¾ the lower vehicle limitations of prEN 15273-1, prEN 15273-2, prEN 15273-3 are adhered to.

Railway applications - Braking - Requirements for the brake system of coaches

TB/T 2845-2007 车辆减速器技术条件

本标准规定了驼峰调车场车辆减速器（以下简称减速器）的一般要求、尺寸参数和性能要求，技术要求，动力系统要求，试验方法，检验规则，标志、包装、运输、贮存。 本标准适用于驼峰调车场所安装的间隔和目的制动种类减速器的设计、改进、制造和检验。

Technical requirements for car retarder

TB/T 1978-2007 铁道货车组合式制动梁

本标准规定了组合式制动梁（以下简称制动梁）技术要求、静载荷与疲劳试验方法、检验规则、标志等。 本标准适用于标准轨距铁道货车用组合式制动梁的制造和检验。本标准的静载荷、疲劳试验方法也适用于其他形式的货车制动梁。

Assembled brake beam for railway freight car

UIC OR 541-08-2007 制动器.关于不同制动器部件的制造规则.铁路货车的出轨探测器

The purpose of a derailment detector is to stop the train by activahng automatic application of the brakes or to send a signal to the train driver when its triggering threshhold has been reached following a wagon derailment. ~ The Jerailment detector cannot prevent derailments. Its presence on a vehicule should never be used as an excuse for cutting back or compromising on preventive vehicule marntenance. The pneumatic derailment detector monitors vertical accelerations at wagon-body level and, when its triggering threshold is reached, opens a large aperture to exhaust the main brake pipe to atmosphere. The electronic derailment detector does not necessarily cause the main brake pipe of the vehicle concerned to open. If the train is equipped with a train control-command and diagnosis system, the detector can transmit an advance warning and derailment signal to the driver. (The relevant conditions have not yet been defined in this leaflet). Accelerations occurring in normal service should not trigger the derailment detector. It is crucial that, in the event of a derailment, the vertical acceleration occurring at the point where the derailment detector is to be fitted exceeds the triggering threshold of the detector. This applies irrespective of the load conditions and speed of the wagon. The derailment detector should be designed to operate on lines that meet the quality standards laid down in UIC Leaflet 518, Appendix D (QN1-QN3).

Brakes - Regulations concerning the manufacture of the different brake parts - Derailment detectors for wagons

UIC OR 541-4-2007 制动器.带合成制动块的制动器.合成制动块的鉴定用通用条件

This leaflet contains the general conditions for tread brakes with composite brake blocks. It describes the required properties of the composite brake blocks, their coefficients of friction and geometry requirements, and furthermore the mechanical, physical and chemical features for both organic and sintered composite brake block linings. The certification process for composite brake blocks including the test programs to be applied is explained. The conditions to be observed are listed. The validity duration of the certification is time-limited. The composite brake blocks certified according to the requirements below are listed in the tables published on the UIC website. The same applies to composite brake blocks which only meet the requirements below with restrictions. Definitions, test methods and measurements to be performed complete the leaflet.

Brakes.Brakes with composite brake blocks.Generalconditions for certification of composite brake blocks

TB/T 3145-2007 机车单元制动器

本标准规定了机车单元制动器的技术要求、试验方法，检验规则，标志、包装、贮存及运输等。 本标准适用于机车踏面单元制动器（以下简称“机车单元制动器”）的制造、试验与验收。

Locomotive brake unit

TB/T 3146.2-2007 DK-1型机车电空制动机 第2部分:单阀试验规范

本部分规定了DK-1型机车电空制动机的空气制动阀、分配阀、紧急阀、电动放风阀、安全阀等性能要求及在试验台上的检验方法。 本部分适用于DK-1型机车电空制动机的空气制动阀、分配阀、紧急阀、电动放风阀、安全阀等的性能试验。

DK-1 Electro-pneumatic brake for electric locomotives Part 2: Test standard of single valve

TB/T 2056-2007 电力机车制动机技术条件

本标准规定了电力机车制动机（以下简称“机车制动机”）的使用条件、一般要求、基本要求、技术性能和检验规则。 本标准适用于新造电力机车（以下简称“机车”）用机车制动机。

Technical specification of brake for electric locomotive

TB/T 3146.1-2007 DK-1型机车电空制动机 第1部分:单机性能试验

本部分规定了DK-1型机车电空制动机的单机性能以及制动机的试验方法。 本部分适用于新造机车用DK-1型机车电空制动机（以下简称“制动机”）单机性能的检查与验收。

DK-1 Electro-pneumatic brake for electric locomotives Part 1: Single unit performance test

UIC ORI 543-1-2007 制动器.铁路货车制动器的维护用最低标准研究

This leaflet deals in point 1 with a "minimum test procedure" and in point 2 with the "technical requirements for brake testing equipment". The "minimum test procedure" describes minimum standards for technical inspections carried out in repairing faulty air brakes on rolling stock used in international traffic. The "technical requirements for brake testing equipment" set out basic requirements for brake testing equipment so that the "minimum test procedure" can be carried out. These technical requirements could form part of a specification sheet.

Brakes.A study of minimum standards for maintenance of goods wagon brakes

UIC O 543-2007 制动器.除牵引机车和牵引车辆以外的其他客货车辆的设备管理规则

This leaflet sets out the basic provisions and the minimum conditions with which the braking equipment of coaches1 and wagons must comply in order to be accepted for running in international service. Additional regulations as well as provisions and other details specific to the different types of braking equipment and related components are defined in other UIC leaflets in series 54.

Brakes.Regulations governing the equipment of trailing stock

UIC O 545-2007 制动器.铭文、标志和符号

This leaflet shows the inscriptions and symbols to be used to indicate: the braking equipment fitted to a vehicle, the characteristics of that equipment, its technical properties.

Brakes.Inscriptions,marks and signs

TB/T 3144-2006 铁路货车空重车自动调整装置 通用技术条件

本标准规定了铁道货车空重车自动调整装置（以下简称“自调装置”）的技术要求、试验方法、检验规则、标志、包装及贮存等。 本标准适用于构造速度小于等于120km/h，轴重25t及以下的铁道货车用自调装置。

General technical specifications of variable load equipment for railway freight car

DIN 27205-12:2006 铁路车辆的状况.第12部分:铁路机车制动器的功能和密封性

This document determines the minimum requirement for the function and tightness of railway vehicle brakes.

State of railway vehicles - Brake - Part 12: Function and tightness of railway vehicle brakes

TB/T 3124-2005 机车车辆制动用压缩空气质量等级及测量方法

本标准规不定期了机车车辆制动用压缩空气质量等级及测量方法。 本标准适用于机车车辆及动车组制动系统用压缩空气，其他风动设备也适用本标准。

Compressed air quality grades and measurement methods for rolling stock brakes

DIN EN 14601:2005 轨道交通.制动管和主储水管用直头和弯头旋塞 .德文版本 EN 13063-2-2005

This European Standard is applicable to manually operated end cocks designed to cut-off the brake pipe and the main reservoir pipe of the air brake and compressed air system of rail vehicles; without taking the type of vehicles and track-gauge into consideration. This European Standard specifies requirements for the design, dimensions, testing and certification (qualification and/or homologation), and marking.

Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe; English version of DIN EN 14601:2005

UIC OR 541-05-2005 制动器.各种制动器部件的结构规范.车轮滑动保护装置(WSP)

Brakes - Specifications for the construction of various brake parts - Wheel Slide Protection device(WSP)