S34 通用零部件 标准查询与下载

TB/T 2395-2008 铁道机车车辆动力车轴设计方法

本标准适用于正常条件下运行的铁道机车车辆动力车轴，在适用本标准对有关铁路工作条件是否正常存在疑虑，则有必要确定是否需要在许用应力上附加设计因素。 对于轻轨车辆和有轨电车，经过用户和供应商的协商，可以采用其他的标准或文件。 对于特殊运用（如捣固机/清筛机/配碴机等工程机械）的轮对车辆的计算，可以根据本标准用于空载运行和列车编组运行的负荷工况，本标准不适用于其他工作负荷的情况，它们应另外计算。

Design method for powered axles of railway rolling stock

TB/T 3196-2008 机车用合成闸瓦

本标准规定了铁道机车用合成闸瓦的术语、定义和符号、技术要求、检查试验方法、检验规则、标志、包装、运输及储存要求等。 本标准适用于最高运行速度为120 km/h，轴重不大于25t的铁道机车用合成闸瓦。

Composite brake shoes for locomotive

TB/T 3005-2008 机车用粉末冶金闸瓦

本标准规定了机车、动车用粉末冶金闸瓦的技术要求、试验方法、检验规则和标志、包装、运输与贮存等要求。 本标准适用于最高运行速度为160 km/h、轴重不大于25 t的机车、动车用粉末冶金闸瓦（以下简称闸瓦）。 运行速度在160 km/h到200 km/h之间的机车、动车用粉末冶金闸瓦可参照使用。

Power metallurgy brake shoes for locomotive

DIN EN 50152-2:2008 轨道交通.固定设备.交流电开关装置的特殊要求.第2部分:单相隔离开关、接地开关和电压在1Kv以上的各类开关

Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 2: Single-phase disconnectors, earthing switches and switches with U_n above 1 kV; German version EN 50152-2:2007

DIN 1552-2:2008 轨道车辆用轴套.第2部分:钢制压配合轴套(施压)

Bushes for railway vehicles - Part 2: Press-fit bushes (pressed on) of steel

DIN EN 12082:2008 轨道交通.轴套.性能测试

This European Standard specifies the principles and methods for a rig performance test of the system of box housing, rolling bearings, sealing and grease. Test parameters and minimum performance requirements for vehicles in operation on main lines are specified in Clause 6 and Annex A (normative). Different test parameters and performance requirements may be selected for vehicles in operation on other networks. Basic principles for a field test are also determined.

Railway applications - Axleboxes - Performance testing; English version of DIN EN 12082:2008-06

DIN 1552-1:2008 轨道车辆用轴套.第1部分:钢制压配合轴套

Bushes for railway vehicles - Part 1: Press-fit bushes of steel

DIN 1552-3:2008 轨道车辆用轴套.第3部分:钢制凸状压配合轴套

Bushes for railway vehicles - Part 3: Convex press-fit bushes of steel

DIN EN 12080:2008 轨道交通.轴套.滚动轴承

This European Standard specifies the quality parameters of axlebox rolling bearings, required for reliable operation of trains on European networks. It covers metallurgical and material properties as well as geometric and dimensional characteristics. It also defines methods for quality assurance and conditions for approval of the products.

Railway applications - Axleboxes - Rolling bearings; English version of DIN EN 12080:2008-06

DIN EN 50152-1:2008 轨道交通.固定装置.交流电开关设备的特殊要求.第1部分:U_n大于1kV的单相电路断路器

Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 1: Single-phase circuit-breakers with U_n above 1 kV; German version EN 50152-1:2007

DIN 1552-4:2008 铁路车辆用轴衬.第4部分:钢的精密压配合轴衬

Bushes for railway vehicles - Part 4: Precision press-fit bushes of steel

NF F18-206:2008 轨道交通.轴箱.性能测试

Railway applications - Axleboxes - Performance testing.

DIN EN 13597:2008 轨道交通.橡胶悬架元件.气动悬架弹簧用橡胶膜片

This European Standard specifies: -- characteristics that suspension diaphragms achieves, together with applicable inspection and test methods to be carried out for verification; approval procedure to be implemented by the customer; guidelines for qualification of the product with specified requirements; -- quality monitoring of diaphragms in manufacture; -- supply requirements. This European Standard applies to suspension diaphragms designed to be fitted on railway vehicles and similar vehicles running on dedicated tracks with permanent guide systems, whatever the type of rail and the running surface. The European Standard does not detail the other components of pneumatic suspension assemblies or control systems such as air reservoirs, frames, stiffeners, emergency suspension systems or elastic supports (such as series springs), etc., which will affect the diaphragm performance.

Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs; English version of DIN EN 13597:2008-04

BS EN 12082:2007+A1:2010 轨道交通.轴套.性能测试

Railway applications. Axleboxes. Performance testing

GOST R 52942-2008 轨道交通.轮轴.产品要求

Railway applications. Axles. Product requirements

DIN EN 15049:2007 轨道交通.悬浮部件.钢制扭杠

This European Standard applies to torsion bars made of steel for anti-roll bar systems used on railway vehicles. This European Standard includes straight and bended torsion bars, but does not detail the other components of the anti-roll bar systems such as levers, bearings, bushes etc. ~ This European Standard constitutes guidelines on the following topics: -- design; -- specification of technical requirements; -- production requirements; -- tests; -- supply conditions.

Railway applications - Suspension components - Torsion bar, steel; English version of DIN EN 15049:2007-12

BS ISO 6305-2:2007 铁道部件.技术交货要求.非合金碳钢垫板

This part of ISO 6305 specifies the quality requirements of the product and the conditions of acceptance testing for rolled non-alloy carbon steel baseplates for use with flat-bottom railway rails.

Railway components - Technical delivery requirements - Non-alloy carbon steel baseplates

BS EN 15049:2007 轨道交通.悬挂部件.钢制扭力杆

This European Standard applies to torsion bars made of steel for anti-roll bar systems used on railway vehicles. This European Standard includes straight and bended torsion bars, but does not detail the other components of the anti-roll bar systems such as levers, bearings, bushes etc. This European Standard constitutes guidelines on the following topics:  design;  specification of technical requirements;  production requirements;  tests;  supply conditions.

Railway applications - Suspension components - Torsion bar, steel

TB/T 2591-2007 铁路机车滚动轴承订货技术条件

本标准规定了铁路机车滚动轴承的术语定义、代号及外形尺寸、技术要求、检查方法、检验规则、保用期、标志、包装及贮存等。 本标准适用于铁路机车用各类滚动轴承的订货、生产、检验和用户验收。

Specification for rolling bearing of rail-locomotive for booking

DIN 25201-2 Berichtigung 1:2007 铁道车辆及其组件的设计指南.螺栓连接.第2部分:设计.机械应用.DIN 25201-2:2006-04的勘误

Design guide for railway vehicles and their components - Bolted joints - Part 2: Design - Mechanical application, Corrigenda to DIN 25201-2:2006-04