S34 通用零部件 标准查询与下载
共找到 540 条与 通用零部件 相关的标准，共 36 页
Polymer composite roofs for covered freight cars of 1520 mm gaugemain line railways. Specifications
- ICS
- 45.060.20
- CCS
- S34
- 发布
- 2015
- 实施
- 2017-01-01
Railway applications. Passenger Alarm System. System requirements
- ICS
- 13.320;45.060.01
- CCS
- S34
- 发布
- 2014-09-30
- 实施
- 2014-09-30
This European Standard specifies the requirements for Type 10 automatic couplers for railway applications. It defines the minimum interface requirements in order to allow automatic coupling (mechanical and pneumatic) of two Type 10 automatic couplers. The interfaces of the end coupler specified in this European Standard:- enable the rescue of a train set in an event of a breakdown by another trainset of different type, without the need to use an intermediate coupler adapter, accessories or component; - are the reference interfaces to which the rescue coupler defined by EN 15020 will comply. It does not define; - interface requirements concerning electrical connections; - clearance requirements around the coupler head; - the height above top of rail for the coupler; - the position of the pivot point of the coupler.
Railway applications - Automatic coupler - Performance requirements@ specific interface geometry and test method
- ICS
- 45.040
- CCS
- S34
- 发布
- 2014-03
- 实施
Railway rolling stock - Vandal-proof covering - Characteristics and tests
- ICS
- 45.060.20
- CCS
- S34
- 发布
- 2013-12-06
- 实施
- 2013-12-06
Electronic railway equipment. On board driving data recording system. System specification
- ICS
- 03.220.30;45.060.01
- CCS
- S34
- 发布
- 2013-11-30
- 实施
- 2013-11-30
本规程适用于机车速度表(以下简称速度表)的首次检定、后续检定和使用中检查。
Locomotive Speedmeters
- ICS
- CCS
- S34
- 发布
- 2013-11-28
- 实施
- 2014-02-28
Railway rolling stock - Windows
- ICS
- 45.060.01
- CCS
- S34
- 发布
- 2013-05-24
- 实施
- 2013-05-24
本标准规定了内燃机车用可曲挠橡胶接头(以下简称“接头”)的术语和定义,分类、标记、结构及规格尺寸,技术要求,检验方法和检验规则,标志、包装、运输和储存。本标准适用于内燃机车用以输送工作压力小于或等于1. 5 MPa流体的接头。
Joint for diesel locomotive
- ICS
- 45.060.10
- CCS
- S34
- 发布
- 2013-03-13
- 实施
- 2013-09-01
本标准规定了机车车辆门窗用密封材料技术要求、试验方法、检验规则、包装、储存和标志。本标准适用于机车车辆门窗用密封材料,其他密封材料可参照执行。
Doors and windows sealing materials for locomotive and rolling stock
- ICS
- 45.060.01
- CCS
- S34
- 发布
- 2013-03-13
- 实施
- 2013-09-01
本标准规定了动车组用鼓形齿联轴器(以下简称联轴器)的术语和定义、技术要求、检验方法、检验规则、标志、包装、运输和储存。本标准适用于200 km/h及以上速度等级的动车组齿轮传动装置用鼓形齿联轴器。
Curved tooth coupling for EMUs
- ICS
- 45.060.01
- CCS
- S34
- 发布
- 2013-02-20
- 实施
- 2013-06-01
本部分规定了直槽防松螺母(以下简称“防松螺母”)的结构型式、规格及标记、技术要求、检验方法、检验规则、标志、包装、运输及储存。本部分适用于机车车辆转向架和电气螺纹连接用规格为M4~M39,性能等级为5、8、10和12级,产品等级为A级和B级(A级用于D≤16 mm,B级用于D > 16 mm)的防松螺母。其他轨道车辆用防松螺母可参照执行。
Locknuts and washers of rolling stock.Part 1:Locknuts with straight slot
- ICS
- 45.060.01
- CCS
- S34
- 发布
- 2013-02-20
- 实施
- 2013-06-01
本部分规定了三层弹性垫圈(以下简称:“垫圈”)的结构形式、规格、标记、技术要求、试验方法、检验规则、包装、运输及储存。本部分适用于机车车辆转向架和电气螺纹连接用规格为4 mm~20 mm的弹性垫圈,其他轨道车辆用弹性垫圈可参照执行。
Locknuts and washers of rolling stock.Part 2:Ternate spring washers
- ICS
- 45.060.01
- CCS
- S34
- 发布
- 2013-02-20
- 实施
- 2013-06-01
本标准规定了铁道罐车用呼吸式安全阀(以下简称呼吸阀)的术语和定义、组成和型号、结构和材料、性能要求、试验方法和检验规则,以及标志、包装、运输、储存等。本标准适用于新造运输液体介质的铁道罐车用呼吸阀。
Railway tank car dedicated breathing type safety valves
- ICS
- 45.060.20
- CCS
- S34
- 发布
- 2013-02-20
- 实施
- 2013-06-01
本标准规定了动车组换气装置的技术要求,试验方法,检验规则,标志、包装、运输、贮存等内容。本标准适用于设计速度为200 km/h及以上动车组用换气装置,其他车辆可参照执行。
Ventilation device for powered car train-set
- ICS
- 45.060
- CCS
- S34
- 发布
- 2013-02-20
- 实施
- 2013-06-01
Valve rotation mechanism of diesel engine parts for locomotives and trains
- ICS
- CCS
- S34
- 发布
- 2013-01-01
- 实施
- 2013-01-01
Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
- ICS
- 03.220.30;45.060.20
- CCS
- S34
- 发布
- 2012-12-01
- 实施
- 2012-12-28
Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
- ICS
- 03.220.30;45.060.20;45.080
- CCS
- S34
- 发布
- 2012-12-01
- 实施
Railway rolling stock parts -- Test methods of resistibility for moisture and rainfall (Amendment 1)
- ICS
- 45.060.01
- CCS
- S34
- 发布
- 2011-09-07
- 实施
In NOTE 2,replace "JIS C 0010 Environmental testing Part 1:General and guidance" by "JIS C 60068-1 Environmental testing Part 1:General and guidance".
Railway rolling stock.High and low temperature test methods of parts (Amendment 1)
- ICS
- 45.060.01
- CCS
- S34
- 发布
- 2011-09-07
- 实施
本规程适用于铁路机车车辆车轴轴颈量具的首次检定、后续检定和使用中检验。
Special Measuring Tools for Axle Journal in the Railway Rolling Stocks
- ICS
- CCS
- S34
- 发布
- 2011-04-02
- 实施
- 2011-10-01
