S35 牵引电气设备 标准查询与下载
共找到 616 条与 牵引电气设备 相关的标准，共 42 页
Railway applications - Mounted parts of the traction transformer and cooling system - Part 1: HV bushing for traction transformers; German version CLC/TS 50537-1:2010
- ICS
- 29.080.20;29.180;45.060.01
- CCS
- S35
- 发布
- 2011-04
- 实施
- 2011-04-01
Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for traction transformers and reactors; German version CLC/TS 50537-2:2010
- ICS
- 23.080;29.180;45.060.01
- CCS
- S35
- 发布
- 2011-04
- 实施
- 2011-04-01
Railway applications. Rolling stock equipment. Capacitors for power electronics. Paper/plastic film capacitors
- ICS
- 31.060.30;45.060.01
- CCS
- S35
- 发布
- 2011-03-31
- 实施
- 2011-03-31
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 1: Pantographs for main line vehicles;German version EN 50206-1-2010
- ICS
- 45.060.10
- CCS
- S35
- 发布
- 2011-02
- 实施
- 2011
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles; German version EN 50206-2:2010
- ICS
- 45.060.10
- CCS
- S35
- 发布
- 2011-02
- 实施
- 2011-02-01
本标准规定了机车电气屏柜的通用技术要求、试验项目和方法。 本标准适用于铁道电力机车、内燃机车和动车组上的电气屏柜。 对于不同于本标准的特殊要求，经用户和制造商协商，由产品技术条件规定。 本标准不适用于各类电子控制插件箱。 城轨车辆、磁浮车辆的电气屏柜产品可参照本标准。
Technical specification for locomotive electrical cubicles
- ICS
- 29.280
- CCS
- S35
- 发布
- 2011-01-12
- 实施
- 2011-07-01
本标准规定了机车车辆电子装置的机械安装尺寸、接地和布线的要求。 本标准适用于机车车辆电子装置的安装。
Mounting of electronic equipment for rolling stock
- ICS
- 29.280
- CCS
- S35
- 发布
- 2011-01-12
- 实施
- 2011-07-01
本标准规定了铁路机车车辆(含动车组)车顶的电缆和母线的布线要求。 本标准适用于铁路机车车辆(含动车组)车顶高压布线。
Roof cabling for high voltage section of rolling stock
- ICS
- 29.280
- CCS
- S35
- 发布
- 2011-01-12
- 实施
- 2011-07-01
Railway applications - Air conditioning for driving cabs - Part 1 : comfort parameters.
- ICS
- 45.060.10
- CCS
- S35
- 发布
- 2011-01-01
- 实施
- 2011-01-01
Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires; German version EN 50149:2001, Corrigendum to DIN EN 50149 (VDE 0115-602):2001-10; German version CENELEC-Cor. :2010 to EN 50149:2001
- ICS
- 29.280
- CCS
- S35
- 发布
- 2011-01
- 实施
Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Mutual interaction of a.c. and d.c. traction systems
- ICS
- 29.280
- CCS
- S35
- 发布
- 2010-12-31
- 实施
- 2010-12-31
Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Provisions against the effects of stray currents caused by d.c. traction systems
- ICS
- 29.120.50;29.280
- CCS
- S35
- 发布
- 2010-12-31
- 实施
- 2010-12-31
Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
- ICS
- 29.280;45.060
- CCS
- S35
- 发布
- 2010-11
- 实施
Railway applications - Electronic equipment used on rolling stock; German version EN 50155:2007, Corrigendum to DIN EN 50155 (VDE 0115-200):2008-03; German version CENELEC-Cor.:2010 to EN 50155:2007
- ICS
- 45.060.01
- CCS
- S35
- 发布
- 2010-11
- 实施
Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system (IEC 61377-1:2006); German version EN 61377-1:2006, Corrigendum to DIN EN 61377-1 (VDE 0115-403-1):2006-12; German version
- ICS
- 45.060.10
- CCS
- S35
- 发布
- 2010-11
- 实施
This part of IEC 60349 applies to converter-fed alternating current motors forming part of the equipment of electrically propelled rail and road vehicles. The object of this part is to enable the performance of a motor to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for comparison with other motors. Where further testing is to be undertaken in accordance with IEC 61377-1 and IEC 61377- 3, it may be preferable, to avoid duplication, that some type and investigation tests be carried out on the combined test bed. Particular attention is drawn to the need for collaboration between the designers of the motor and its associated converter as detailed in 5.1. NOTE 1 This part also applies to motors installed on trailers hauled by powered vehicles. NOTE 2 The basic requirements of this part may be applied to motors for special purpose vehicles such as mine locomotives but this part does not cover flameproof or other special features that may be required. NOTE 3 It is not intended that this part should apply to motors on small road vehicles, such as battery-fed delivery vehicles, factory trucks, etc. This part also does not apply to minor machines such as windscreen wiper motors, etc. that may be used on all types of vehicles. NOTE 4 Industrial type motors complying with IEC 60034 may be suitable for some auxiliary drives, providing that it is demonstrated that operation on a converter supply will meet the requirements of the particular application. The rating of traction motors fed in parallel by a common converter has to take into account the effect on load-sharing of differences of wheel diameter and of motor characteristics as well as weight transfer when operating at high coefficients of adhesion. The user is to be informed of the maximum permissible difference in wheel diameter for the particular application. The electrical input to motors covered by this part comes from an electronic converter. NOTE 5 At the time of drafting, only the following combinations of motors and converters had been used for traction applications, but it may also apply to other combinations which may be used in the future: – asynchronous motors fed by voltage source converters; – asynchronous motors fed by current source converters; – synchronous motors fed by current source converters. The motors covered by this part are classified as follows: a) Traction motors – Motors for propelling rail or road vehicles. b) Auxiliary motors not covered by IEC 60034 – Motors for driving compressors, fans, auxiliary generators or other auxiliary machines.
Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors
- ICS
- 29.280;43.060.50;45.060.10
- CCS
- S35
- 发布
- 2010-10-01
- 实施
- 2010-10-01
Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
- ICS
- 29.160.30;43.060.50;45.060.10
- CCS
- S35
- 发布
- 2010-10
- 实施
本标准规定了机车车辆用直流接触器的基本技术要求、额定值等级、试验方法、检验规则以及标识、包装、运输和贮存。 本标准所指直流接触器为直流电空接触器和直流电磁接触器。 本标准适用于机车车辆（含动车组）主电路、辅助电路和控制电路使用的额定电压最大至3 000V，额定电流最大至3 150 A的直流接触器（以下简称接触器）。 对机车上其他用途的特殊接触器，可参照本标准由用户和制造途的接触器可参照本标准进行。
DC contactors on board rolling stock
- ICS
- 29.280
- CCS
- S35
- 发布
- 2010-08-22
- 实施
- 2011-02-01
本标准规定了高速电动车组牵引电动机的使用条件、结构特点及参数、主要试验项目、检验规则及标志、包装、运输和贮存等。 本标准适用于采用电压源变流器供电、变频变压力式调速、运行速度在200 km/h以上高速动车组用牵引电动机（以下简称电机)。
Specification for traction motors on board motive units
- ICS
- 29.280
- CCS
- S35
- 发布
- 2010-08-22
- 实施
- 2011-02-01
This part of IEC 61881 applies to capacitors for power electronics intended to be used on rolling stock. The rated voltage of capacitors covered by this part is limited to 10 000 V. The operating frequency of the systems in which these capacitors are used is usually up to 15 kHz, while the pulse frequencies may be up to 5 to 10 times the operating frequency. It distinguishes between AC and DC capacitors. They are considered as components mounted in enclosures. NOTE This standard covers an extremely wide range of capacitor technologies for numerous applications: overvoltage protection, DC and AC filtering, switching circuits, DC energy storage, auxiliary inverters, etc. Examples are given in Clause 9. The following are excluded from this standard: – capacitors for induction heat-generating plants operating at frequencies between 40 Hz and 24 000 Hz (see IEC 60110-1 and 60110-2); – capacitors for motor applications and the like (see IEC 60252-1 and IEC 60252-2); – capacitors to be used in circuits for blocking one or more harmonics in power supply networks; – small AC capacitors as used for fluorescent and discharge lamps (see IEC 61048 and IEC 61049); – capacitors for suppression of radio interference (see IEC 60384-14); – shunt capacitors for AC power systems having a rated voltage above 1 000 V (see IEC 60871-1 and IEC 60871-2); – shunt power capacitors of the self-healing type for AC systems having a rated voltage up to and including 1 000 V (see IEC 60831-1 and IEC 60831-2); – shunt power capacitor of the non self-healing type for AC systems having a rated voltage up to and including 1 000 V (see IEC 60931-1 and IEC 60931-2); – series capacitors for power systems (see IEC 60143-1, IEC 60143-2 and IEC 60143-3); – coupling capacitors and capacitors dividers (see IEC 60358); – capacitors for applications requiring energy storage/high current discharge such as photocopiers and lasers; – capacitors for microwave ovens; – capacitors for power electronics (see IEC 61071).
Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors
- ICS
- 45.060
- CCS
- S35
- 发布
- 2010-08
- 实施
- 2010-08-10
