T32 螺塞、管件 标准查询与下载

BS ISO 16232-6:2007 道路车辆.液压管路部件清洁度.重量分析法测定颗粒质量

The purpose of this part of ISO 16232 is to determine the mass of particulate contamination by gravimetric analysis. Contaminants are separated from the extraction liquid by filtration. It applies to automotive components in contact with a fluid. Unless otherwise specified, this part of ISO 16232 deals with particulate cleanliness only. It does not, therefore, cover appearance defects or contamination by liquid or gaseous materials. It covers the amount of residual particulate contaminants resulting from manufacturing processes and from the environment.

Road vehicles - Cleanliness of components of fluid circuits - Particle mass determination by gravimetric analysis

BS ISO 16232-10:2007 道路车辆.液压管路部件清洁度.结果表达

Road vehicles - Cleanliness of components of fluid circuits - Expression of results

BS ISO 16232-4:2007 道路车辆.液压管路部件清洁度.超声波技术萃取污染物的方法

This part of ISO 16232 describes the principles of extraction of contaminants from a component either by immersion in an ultrasonic bath or by applying ultrasonic vibrations directly via sonotrodes. It is preferably applied to small and medium sized components of various geometry of which both internal and/or external surfaces have to be examined (e.g. joint seals, gears, etc). It is also applicable to small parts to be analysed in batches. This method can be used on its own or in association with other methods of extraction described in the ISO 16232 series. Unless otherwise specified, this part of ISO 16232 deals with particulate contamination only. It does not, therefore, cover appearance defects or contamination by liquid or gaseous materials. It covers the amount and the nature of residual particles resulting from manufacturing processes and from the environment.

Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants by ultrasonic techniques

BS ISO 16232-3:2007 道路车辆.液压管路部件清洁度.压力漂洗萃取污染物的方法

This part of ISO 16232 describes the principles of extraction of contaminants from a component by pressure rinsing. It is preferably applied to components of which the surface to be examined is accessible by a jet of test liquid. This method can be employed on its own or in association with other methods of extraction described in the ISO 16232 series. Unless otherwise specified, this part of ISO 16232 deals with particulate contamination only. It does not, therefore, cover appearance defects or contamination by liquid or gaseous materials. It covers the amount and the nature of residual particles resulting from manufacturing processes and from the environment.

Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants by pressure rinsing

BS ISO 16232-5:2007 道路车辆.液压管路部件清洁度.在功能试验台上萃取污染物的方法

This part of ISO 16232 describes the principles of extraction of contaminants by test on a laboratory functional test bench with the test liquid flowing under pressure or under vacuum. It is applicable to both active and passive components through which the fluid can easily flow. Unless otherwise specified, this part of ISO 16232 deals with particulate contamination only. It does not, therefore, cover appearance defects or contamination by liquid or gaseous materials. It covers the amount and the nature of residual particles resulting from manufacturing processes and from the environment.

Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants on functional test bench

BS ISO 16232-2:2007 道路车辆.液压管路部件清洁度.搅拌萃取污染物的方法

This part of ISO 16232 describes the principles of extraction of contaminants from a component by the agitation method. It is preferably applied to components that are hollow and are suited to being agitated by an operator or by an appropriate mechanical device. This agitation method can be employed on its own or in association with other methods of extraction described in the ISO 16232 series. Unless otherwise specified, this part of ISO 16232 deals with particulate contamination only. It does not, therefore, cover appearance defects or contamination by liquid or gaseous materials. It covers the amount and the nature of residual particles resulting from manufacturing processes and from the environment.

Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants by agitation

BS ISO 16232-9:2007 道路车辆.液压管路部件清洁度.自动消光颗粒计数器测量粒径和计数

This part of ISO 16232 defines methods for determining the size distribution of particulate contaminants extracted from automotive components using techniques described in ISO 16232-3, ISO 16232-4 and ISO 16232-5, using automatic light extinction particle counter instruments (APC). It only applies to the analysis of the whole volume of extraction liquid. The size range of particles that can be measured by this technique is limited to

Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by automatic light extinction particle counter

BS ISO 16232-8:2007 道路车辆.液压管路部件清洁度.显微分析测定颗粒性质

This part of ISO 16232 describes a method for determining the nature of contaminant particles by identifying their elemental chemical composition using energy dispersive X-ray spectroscopy (EDX) in combination with a scanning electron microscope (SEM). The contaminant particles are extracted from automotive parts or components and deposited on the surface of a membrane filter. In addition to the number and size of particles as described in ISO 16232-7, this measurement gives the elemental composition of the particles analysed. This information can be used to classify the particles into likely material groups 1). This method cannot determine the nature of organic material 2). The analyses can either be carried out manually or fully automatically, provided the appropriate equipment is available.

Road vehicles - Cleanliness of components of fluid circuits - Particle nature determination by microscopic analysis

ISO 16232-6:2007 道路车辆.液压管路部件清洁度.第6部分:重量分析法测量颗粒质量

The purpose of this part of ISO 16232 is to determine the mass of particulate contamination by gravimetric analysis. Contaminants are separated from the extraction liquid by filtration. It applies to automotive components in contact with a fluid. Unless otherwise specified, this part of ISO 16232 deals with particulate cleanliness only. It does not, therefore, cover appearance defects or contamination by liquid or gaseous materials. It covers the amount of residual particulate contaminants resulting from manufacturing processes and from the environment.

Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis

ISO 16232-9:2007 道路车辆.液压管路部件清洁度.第9部分:用自动消光颗粒计数器测量粒径和计数

This part of ISO 16232 defines methods for determining the size distribution of particulate contaminants extracted from automotive components using techniques described in ISO 16232-3, ISO 16232-4 and ISO 16232-5, using automatic light extinction particle counter instruments (APC). It only applies to the analysis of the whole volume of extraction liquid. The size range of particles that can be measured by this technique is limited to

Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter

ISO 16232-7:2007 道路车辆.液压管路部件清洁度.第7部分:显微分析测量粒径和计数

This part of ISO 16232 defines methods for determining the size and number of contaminant particles, which have been extracted from components and deposited on the surface of a membrane filter, as determined by using either a light optical microscope (LM) or a scanning electron microscope (SEM). The result of this measurement is the particle size distribution on the membrane filter. As the function of parts and components can be impaired by the presence of a single or a few critical particles, a complete analysis of the total membrane filter surface is essential. These analyses can be performed either manually or automatically using Image Analysis (IA) techniques if the appropriate equipment is available.

Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis

ISO 16232-3:2007 道路车辆.液压管路部件清洁度.第3部分:压力漂洗萃取污染物的方法

This part of ISO 16232 describes the principles of extraction of contaminants from a component by pressure rinsing. It is preferably applied to components of which the surface to be examined is accessible by a jet of test liquid. This method can be employed on its own or in association with other methods of extraction described in the ISO 16232 series. Unless otherwise specified, this part of ISO 16232 deals with particulate contamination only. It does not, therefore, cover appearance defects or contamination by liquid or gaseous materials. It covers the amount and the nature of residual particles resulting from manufacturing processes and from the environment.

Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsing

ISO 16232-4:2007 道路车辆.液压管路部件清洁度.第4部分:超声技术萃取污染物的方法

This part of ISO 16232 describes the principles of extraction of contaminants from a component either by immersion in an ultrasonic bath or by applying ultrasonic vibrations directly via sonotrodes. It is preferably applied to small and medium sized components of various geometry of which both internal and/or external surfaces have to be examined (e.g. joint seals, gears, etc). It is also applicable to small parts to be analysed in batches. This method can be used on its own or in association with other methods of extraction described in the ISO 16232 series. Unless otherwise specified, this part of ISO 16232 deals with particulate contamination only. It does not, therefore, cover appearance defects or contamination by liquid or gaseous materials. It covers the amount and the nature of residual particles resulting from manufacturing processes and from the environment.

Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques

ISO 16232-5:2007 道路车辆.液压管路部件清洁度.第5部分:在功能试验台上萃取污染物的方法

This part of ISO 16232 describes the principles of extraction of contaminants by test on a laboratory functional test bench with the test liquid flowing under pressure or under vacuum. It is applicable to both active and passive components through which the fluid can easily flow. Unless otherwise specified, this part of ISO 16232 deals with particulate contamination only. It does not, therefore, cover appearance defects or contamination by liquid or gaseous materials. It covers the amount and the nature of residual particles resulting from manufacturing processes and from the environment.

Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test bench

ISO 16232-8:2007 道路车辆.液压管路部件清洁度.第8部分:显微分析测定颗粒性质

This part of ISO 16232 describes a method for determining the nature of contaminant particles by identifying their elemental chemical composition using energy dispersive X-ray spectroscopy (EDX) in combination with a scanning electron microscope (SEM). The contaminant particles are extracted from automotive parts or components and deposited on the surface of a membrane filter. In addition to the number and size of particles as described in ISO 16232-7, this measurement gives the elemental composition of the particles analysed. This information can be used to classify the particles into likely material groups 1). This method cannot determine the nature of organic material 2). The analyses can either be carried out manually or fully automatically, provided the appropriate equipment is available.

Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis

ISO 16232-10:2007 道路车辆.液压管路部件清洁度.第10部分:结果表达

This part of ISO 16232 defines the rules and the forms of expression and presentation of the results of measurements of particulate cleanliness of components for the fluid circuits of motor vehicles. It also defines a cleanliness coding system for simplifying the reporting and communication of particulate contamination data. This part of ISO 16232 also defines the rules to be used for specifying cleanliness requirements. This part of ISO 16232 does not concern the expression of particulate cleanliness of fluids.

Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results

ISO 16232-2:2007 道路车辆.液压管路部件清洁度.第2部分:搅拌萃取污染物的方法

This part of ISO 16232 describes the principles of extraction of contaminants from a component by the agitation method. It is preferably applied to components that are hollow and are suited to being agitated by an operator or by an appropriate mechanical device. This agitation method can be employed on its own or in association with other methods of extraction described in the ISO 16232 series. Unless otherwise specified, this part of ISO 16232 deals with particulate contamination only. It does not, therefore, cover appearance defects or contamination by liquid or gaseous materials. It covers the amount and the nature of residual particles resulting from manufacturing processes and from the environment.

Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitation

ISO 16232-1:2007 道路车辆.液压管路部件清洁度.第1部分:词汇

This part of ISO 16232 defines the vocabulary used in the characterization and measurement of particulate contamination of parts, components, sub-assemblies and assemblies constituting the fluid circuits of internal combustion engines of road vehicles. This applies to all components that may come into contact with a liquid (e.g. oil, fuel, air conditioning refrigerant, coolant), a solid lubricant or a gas (intake air). Unless otherwise specified, this International Standard deals with particulate cleanliness only. It does not therefore cover appearance defects or contamination by liquid or gas materials. It covers the amount and the nature of residual particulate contaminants resulting from the whole manufacturing processes and from the environment.

Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary

SANS 3996:2007 道路车辆．使用非石油基液压液的液压制动系统软管组件

Specifies the test procedures for, and performance requirements and marking of hydraulic brake hose assemblies to be used in hydraulic brake systems of road vehicles of which the nominal inside diameter of the hose is 3, 2 mm or 4, 8 mm. Applies to as

Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid

SANS 510:2007 道路车辆．使用石油基液压液的液压制动系统软管组件

Specifies the test procedures for, and performance requirements and marking of hydraulic brake hose assemblies to be used in hydraulic brake systems of road vehicles of which the nominal inside diameter of the hose is 3, 2 mm or 4, 8 mm. Applies to as

Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid