共找到 322 条与 车用仪表及测试设备 相关的标准,共 22 页
Instrumentation for elctric vehicles
本标准规定了便携式制动性能测试仪的要求.试验方法、检验规则、标志、包装和贮存。 本标准适用于便携式制动性能测试仪(以下简称测试仪)。
Portable braking performance tester for vehicles
本标准规定了机动车测速仪(以下简称测速仪)的术语和定义、技术要求、试验方法、检验规则、标志、标签、包装 本标准适用于测定在道路上行驶机动车速度的装置,但不适用于安装在机动车上,测定自身速度的装置。
Motor vehicle speed detector
本标准规定了电动汽车仪表的类别和一般要求。 本标准适用于电动汽车用仪表。
Instrumentation for electric vehicles
本标准规定了汽车用车速表在装车状态下的一般要求、指示误差和试验规范。 本标准适用于M、N类汽车用车速表。
Motor vehicles--Speed meters
本标准规定了装于汽车上的速度表、里程表的检验和刻度校正方法。 本标准适用于各类汽车速度表、里程表的检验和校正。
Motor vehicles--Speedometer and odometer--Calibration method
This document specifies symbols (i.e. conventional signs) for use on controls, indicators and tell-tales applying to passenger cars, light and heavy commercial vehicles and buses, to ensure identification and facilitate use. This document additionally describes the purpose and application for the symbols. It also indicates the colours of possible optical tell-tales, which inform the driver of either correct operation or malfunctioning of the related devices.
Road vehicles - Symbols for controls, indicators and tell-tales
This document specifies the standardized camera messages and data types used by a VCIC camera (OSI layer 7). Applications hosted on ECUs want to communicate with one or more cameras (e.g. “Ask camera for parameters.”). If the applications can use standardized services supported by the cameras (API layer 7), the development of a vision application is independent on the camera used. The services can be implemented by general libraries. The definition of streaming data is not an issue of this API.
Road vehicles - Video communication interface for cameras (VCIC) - Part 3: Camera message dictionary
This SAE recommended practice defines the system and component functions, measurement metrics, testingmethodologies for evaluating the functionality and performance of tire pressure systems, and recommended maintenancepractices within the known operating environments.This document is applicable to all axle and all wheel combinations for single unit powered vehicles exceeding 7257 kg(16 000 US lb) gross vehicle weight rating (GVWR), and multi-unit vehicle combinations, up to three (3) towed units,which use an SAE J560 connector for power and/or communication, or equivalent successor connector technology, orwhich use a suitable capacity wireless solution.Examples of included single chassis vehicles would be – utility and delivery vans, tow trucks, rack trucks, buses,recreational vehicles, fuel trucks, trash trucks, dump trucks, cement trucks, and tractors. Examples of combinationvehicles using an SAE J560 or successor connector would be – enclosed van trailers, liquid tanker, platform trailer, loggertrailers, auto transit trailers, and their associated and compatible towing power units. For combination vehicles includingtwo or more trailers, the dollies are also included. The included vehicles can be newly manufactured vehicles or existingvehicles.These systems are recommended to address all tires in service as originally installed on a vehicle by the OEM and/orspecialty vehicle manufacturer, including the vehicle mounted spares, and, for the aftermarket (including replacement orspare parts) are recommended (but optional) to address all tire/rim combinations installed after initial vehicle sale or inusedates.
Tire Pressure Monitoring Systems For Medium and Heavy Duty Highway Vehicles
Road vehicles. Direction-of-motion stereotypes for automotive hand controls
Road vehicles. Security of the mechanical seals used on tachographs. Requirements and test procedures
Hydrogen metering system for motor vehicles
This International Standard gives requirements and recommendations for measurement techniques involving the instrumentation used in impact tests carried out on road vehicles. Its requirements are aimed at facilitating comparisons between results obtained by different testing laboratories, while its recommendations will assist such laboratories in meeting those requirements. It is applicable to instrumentation including that used in the impact testing of vehicle subassemblies. It does not include optical methods which are the subject of ISO 8721.
Road vehicles - Measurement techniques in impact tests - Instrumentation
Road vehicles. Measurement techniques in impact tests. Instrumentation
Road vehicles -- Location of hand controls, indicators and tell-tales in motor vehicles
本规程适用于应用多普勒效应原理对机动车行驶速度进行测量的固定安装式机动车雷达测速仪的首次检定、后续检定和使用中检查。
Fixed Radar Vehicle Speed Measurement Devices
本规程适用于应用多普勒效应原理对机动车行驶速度进行测量的移动式机动车雷达测速仪的首次检定、后续检定和使用中检查。
Mobile Radar Vehicle Speed Measurement Devices
Video data recording systems for road vehicle accidents
本规范适用于四轮定位仪(光电传感器式四轮定位仪、3D影像式四轮定位仪和在线非接触式四轮定位仪)的校准。
Calibration Specification for Four-wheel Aligners
本型式评价大纲适用于分类编码为46460000的汽车排放气体测试仪的型式评价。
Program of Pattern Evaluation of Vehicle Exhaust Emissions Measuring Instrument
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号