T39 车用仪表及测试设备 标准查询与下载

SAE J2750-2012 不同于联邦法规规定的北美汽车/船只分配标识数字结构和使用方法

This procedure was developed to assist in identifying the vehicle, including its point of origin. Coordination of state-wide or provincial-wide World Manufacturer Identifiers (WMIs) by a single organization avoids duplication of state assigned identifiers and assists in the identification of vehicles by agencies such as those concerned with motor vehicle titling and registration, law enforcement, and theft recovery.

Assigned Identification Number Structure and Usage for North American Vehicles/Watercraft Other than Certified to Federal Regulations

SAE J2970-2012 未冷却示踪气体和电子煤气泄露探测器最低性能要求

This standard provides the testing and functional requirements guidance necessary for a leak detection device that uses any non-A/C refrigerant tracer gas, such as helium or a nitrogen-hydrogen blend, to provide functional performance equivalent to a refrigerant electronic leak detector. It explains how a non-refrigerant leak detector's calibration can be established to provide levels of detection equal to electronic leak detectors that meet SAE J 2791 for R-134a and SAE J 2913 for R-1234yf.

Minimum Performance Requirements for Non-Refrigerant Tracer Gasses and Electronic Tracer Gas Leak Detectors

SAE J1699/3-2012 车辆车载自动诊断系统(OBD)II验证检验案例

The main purpose of this Recommended Practice is to verify that vehicles are capable of communicating a minimum subset of information, in accordance with the diagnostic test services specified in SAE J1979: E/E Diagnostic Test Modes, or the equivalent document ISO 15031-5: Communication Between Vehicle and External Equipment for Emissions-Related Diagnostics - Part 5: Emissions-related diagnostic services. Any software meeting these specifications will utilize the vehicle interface that is defined in SAE J2534, Recommended Practice for Pass-Thru Vehicle Programming.

Vehicle OBD II Compliance Test Cases

CAQIS 1001-2012 车载智能控酒仪

本标准规定了车载智能控酒仪的术语和定义、产品型号、要求、试验方法、检验规则、标志、包装、运输与贮存。本标准适用于由手持机和主机组成的车载智能控酒仪(以下简称控酒仪)。

Intelligent controlling alcohol drink instrument on vehicle

JJG 1076-2012 机动车地感线圈测速系统检定装置检定规程

本规程适用于通过改变地感线圈电感量原理的机动车地感线圈测速系统检定装置（以下简称“检定装置”）的首次检定、后续检定和使用中检查。

Verification Regulation of Verification equipment for traffic loop-based speed meters

JJG 1074-2012 机动车激光测速仪检定规程

本规程适用于机动车移动式激光测速仪(包括手持式)和采用脉冲激光测速原理的机动车超速自动监测系统的测速单元（以下统称“激光测速仪”）测速计量性能的首次检定、后续检定和使用中检查。

Verification Regulation of Vehicle laser speed measurement device

JIS D 1011:2011 汽车部件速度计校准法

Automotive parts -- Speedometers -- Methods of calibration

SAE J1059-2011 车速表试验程序

This SAE Recommended Practice provides a test procedure for eddy current speedometers, including the odometer if an integral portion of the speedometer, for passenger car service.

Speedometer Test Procedure

SAE J678-2011 汽车车速表和转速表

This SAE Recommended Practice applies to speedometers, odometers, and speedometer drives typical of passenger vehicles, buses, and trucks used for personal or commercial purposes. The method of determining wheel revolutions per unit distance and overall system design variation are applicable to passenger cars only. Comparable recommendations for trucks and buses are under development. The data of tachometers is applicable to vehicular use, as previously described, and also to stationary and marine engines and special vehicles.

Speedometers and Tachometers Automotive

SAE J862-2011 机械驱动的汽车车速表和里程表的精确度的影响因素

This report is concerned with factors which affect accuracy of distance indication and speed indication of automotive type odometer speedometers. It is the intent to supply information regarding all items which affect the instrument.

Factors Affecting Accuracy of Mechanically Driven Automotive speedometer and Odometers

JIS B 8572-3:2011 燃料油流量计.交易或鉴定中使用的测量仪表.第3部分:小批量燃料油流量计

Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 3: Small amount fuel oil flow meters

JIS B 8572-2:2011 燃料油流量计.交易或鉴定中使用的测量仪表.第2部分:油罐车的小号燃料油流量计

Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 2: Small size fuel oil flow meters on road tankers

JJF(铁道) 606-2011 铁道货车超偏载检测装置期间核查规范

本规范适用于铁道货车超偏载检测装置（以下简称检测装置）的期间核查。

Rules for Intermediate Check of Detecting Device for Overload and Unbalance Load of Rail Wagons

JIS B 8572-4:2011 燃料油流量计.交易或鉴定中使用的测量仪表.第4部分:静态燃料油流量计

Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 4: Stationary fuel oil flow meters

JJF(铁道) 703-2011 车辆压力试验器

本规范规定了车辆压力试验器的计量特性、校准条件、校准项目和校准方法、校准结果的表达、复校时间间隔等。 本规范适用于电控式、微控式等车辆压力试验器的校准。

Pressure Test Instrument for Railway Vehicles

SAE J1627-2011 电子制冷剂泄露探测器用性能标准

This SAE Standard applies to electronic probe-type leak detectors used to service motor vehicle passenger compartment air-conditioning systems. This document does not address any safety issues concerning their design or use.

Performance Criteria for Electronic Refrigerant Leak detectors

BS ISO 16844-2:2011 道路车辆.转速表系统.记录设备电子接口

Road vehicles. Tachograph systems. Electrical interface with recording unit

SAE J1378-2011 电动计时器规范

This SAE Recommended Practice establishes minimum requirements for electric hourmeters for general vehicular applications.

Electric Hourmeter Specification (Stabilized Type)

ISO 16844-2:2011 道路车辆.转速表系统.第2部分:记录设备电子接口

This part of ISO 16844 specifies the electrical connection between the recording unit, and the vehicle network and the motion sensor, in tachograph systems used in road vehicles.

Road vehicles - Tachograph systems - Part 2: Electrical interface with recording unit

SAE J2789-2010 单端型惯量测功计试验用惯量计算

This procedure provides methods to determine the appropriate inertia values for all passenger cars and light trucks up to 4540 kg of GVWR. For the same vehicle application and axle (front or rear), different tests sections or brake applications may use different inertia values to reflect the duty-cycle and loading conditions indicated on the specific test. The purpose of this procedure is to provide a common methodology to calculate test inertia (wheel load and tire rolling radius). The use of common inertia values allows the comparison of test results from different inertia-dynamometers or different testing facilities. This makes the overall testing activities more cost-effective and repeatable.

Inertia Calculation for Single-Ended Inertia-Dynamometer Testing