T39 车用仪表及测试设备 标准查询与下载

QC/T 784-2007 汽车 摩托车仪表用场致发光屏

本标准规定了汽车、摩托车仪表用场致发光屏（以下简称发光屏）的要求、试验方法、检验规则及标志、包装、储存和保管。 本标准适用于汽车、摩托车仪表用场致发光屏。其他机动车仪表用场致发光屏也可参照执行。

Electroluminescent screen for automobile and motorcycle instrument

QC/T 727-2007 汽车、摩托车用仪表

本标准规定了汽车、摩托车用仪表的分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本部分适用于汽车、摩托车用里程表、转速表、燃油表、温度表、压力表、电压表、电流表。其他机动车用仪表可参照使用。

Instrument for automobiles and motorcycle

QC/T 217-2007 汽车用压力报警器

本标准规定了汽车用压力报警器的要求、试验方法、检验规则和标志、包装、运输及储存。 本标准适用于汽车用压力报警器。其他机动车用压力报警器也可参照执行。

Pressure alarms for automobile

QC/T 208-2007 汽车用温度报警器

本标准规定了汽车用温度报警器（以下简称报警器）的分类、要求、试验方法、检验规则及标志、包装、储存和保管。 本标准适用于汽车用温度报警器。

Temperature alarms for automobile

SAE J1791-2007 自动推进的扫路机和清洁器双位驾驶控制器和显示器

This SAE standard applies to self-propelled driver operated sweepers and scrubbers as defined in SAE J 2130. The purpose of this document is to establish the basic requirements associated with controls and displays for dual position driving controls as depicted in a typical installation shown in Figure 1. The control layout illustrated being of a conventional installation as associated with a normal on- road vehicle having a steering wheel to steer the machine and foot pedals to control the speed and braking functions. The document elaborates the requirements for an originally built machine with two driving positions but also where a proprietary commercial truck chassis is converted from a single driving position, it also advises recommendations in design, construction and safety related elements. In the case where National Regulations pertain to the design and performance of driving control systems as depicted, then these regulations take precedent over the recommendations in this document.

Self-Propelled Sweepers and Scrubbers Dual Position Driving Controls and Displays

SAE J48-2007 液位指示器指南

This SAE Recommended Practice pertains to liquid level determination for any compartment of off-road machinery as defined in SAE J1116 and J1057.

Guidelines for Liquid Level Indicators

KS R ISO 6487:2006 道路车辆.冲击试验测量技术.仪器设备

이 규격은 자동차 및 부품의 안전성에 관한 충돌 시험에 사용하는 계측 채널 및 권장 사항

Road vehicles－Techniques of measurement inimpact tests－Instrumentation

SANS 20089:2006 I．机动车最高车速限制或可调速度限制功能认证；Ⅱ．就已批准款型机动车的最高车速限制装置或可调速度限制装置的安装认证；Ⅲ．车速限制装置（SLD）或可调速度限制装置(ASLD)认证的统一规定

Applies to vehicles of categories M3, N2, and N3 equipped with an speed limiting device (SLD) and to vehicles of categories M and N equipped with an adjustable speed limitation device (ASLD), which have not been separately approved, or so designed or equ

Uniform prescriptions for approval of: I Vehicles with regard to limitation of their maximum speed or their adjustable speed limitation function; II Vehicles with regard to the installation of a speed limiting device (SLD) or adjustable speed limitation d

ISO 2575:2004/Amd 2:2006 道路车辆.控制装置、指示器和信号装置用符号.修改件2

This is Amendment 2 to ISO 2575-2004 (Road vehicles — Symbols for controls, indicators and tell-tales)

Road vehicles - Symbols for controls, indicators and tell-tales; Amendment 2

SANS 1441:2006 机动车辆用速度计装置

Covers requirements for speedometers on category M or N motor vehicles.

Speedometer equipment on motor vehicles

SANS 467:2005 出租车电子计价器

Applies to electronic taximeters, to be installed on public hire vehicles (taxis or cabs) which, with the aid of electronic devices, calculate and indicate the amount to be paid by the passenger of the taxi. Does not deal with performance requirements of

Electronic taximeters

JJG 1001-2005 机动车近光检测仪校准器

本规程适用于机动车近光检测仪校准器(以下简称近光校准器)的首次检定、后续检定和使用中检验。定型鉴定、样机试验中主要计量性能的试验，可参照本规程执行。

Calibrators for Near Headlamp Tester of Motor Vehicle

GM 9985813-2005 推动器磁带胶粘剂

The specified material requirements conform to those indicated in Swedish standard SS 141330, issue 10.

Adhesive, Tape, Promoter Revision B

GMP.TES.014-2005 热塑性弹性体-整体着色内部240MPa弯曲模量肖氏D34苯乙烯嵌段共聚物

This standard is a tool to classify materials. It is essential to see the entirety and not get locked by single requirements.

Thermoplastic Elastomer - Styrene Block Copolymer, Shore D34, 240 MPa Flexural Modulus, Interior, Integrally Colored Revision B

JIS D 5609:2005 计价表

この規格は，タクシー及びハイヤー(以下，タクシーという。)に取り付けられる電子式タクシーメーター(以下，タクシーメーターという。)について規定する。

Taximeters

GM DESIGN VOL 2 C2B-2005 全球尺寸标注和公差操作.修订－2004年

Freigabemuster, fur die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung und Konstruktion genehmigt sein

Global Dimensioning And Tolerancing Addendum ?2004

ISO 16844-1:2001/Cor 1:2005 道路车辆.速度记录器系统.第1部分:电连接器.技术勘误1

This standard is Road vehicles - Tachograph systems - Part 1: Electrical connectors; Technical Corrigendum 1.

Road vehicles - Tachograph systems - Part 1: Electrical connectors; Technical Corrigendum 1

GMN10083-2005 取代 GM4349M塑料基质的内漆完成耐用性

Unbeschadet etwaiger durch den Abnehmer erfolgenden Stichprobenprüfungen tragt der Lieferant die Verantwortung dafür, dao die gelieferte Ware die Opel - Zeichnungsvorschriften erfüllt. Mustern sowie Teilen einer ersten Serienlieferung ist unaufgefordert e

Interior Paint Finish Durability, Plastic Substrates Revision C

GM 9984310-2005 配件的强耐腐性粉末涂料

In diesen Technischen Lieferbedingungen sind die qualitatsabhangigen Anforderungen dieses Polsterstoffes festgelegt. Die allgemeinen Mindestanforderungen sind grundsatzlich nach TM 110000 zu prüfen.

High Corrosion Performance Powder Coating for Applied Parts

GMP.TES.002-2005 热塑性弹性体-内部肖氏A60苯乙烯嵌段共聚物

For vindrutor pa motorfordon. For windscreens on motor vehicles.

Thermoplastic Elastomer ?Styrene Block Copolymer, Shore A60, Interior Revision C