T72 牵引装置 标准查询与下载

SAE J684-2014 挂车联结器连接装置和安全链汽车类型

This SAE Standard includes couplings, hitches, and safety chains used in conjunction with all types of trailers or towed vehicles whose Gross Vehicle Weight Rating (GVWR) does not exceed 4540 kg (10 000 lb). This includes such types as utility, boat, camping, travel, and special purpose trailers which are normally towed by conventional passenger cars, light-duty commercial vehicles, light trucks, and multipurpose passenger vehicles. This document is intended primarily for ball-and-socket type of couplings and hitches. It should not be construed as a limitation to this type alone but should apply where appropriate to ring-and-pintle, clevis-and-pin, or any o

Trailer Couplings, Hitches, and Safety Chains-Automotive Type

BS ISO 13052:2013 道路车辆.3.5 t以下的拖车.导轮和牵引杆支承的要求

Road vehicles. Trailers up to 3,5 t. Requirements for jockey wheels and drawbar supports

ISO 7641:2012 道路车辆.拖车重量低于3.5吨.钢制牵引杆的机械强度计算

This International Standard gives a simplified procedure for the calculation of the mechanical strength of steel drawbars, whether there are welds or not, for centre-axle trailers Categories O1 and O2 as specified in the UNECE, Consolidated Resolution on the Construction of Vehicles (R.E.3). Consequently, it only applies to simple constructions that enable a calculation in bending.

Road vehicles - Trailers up to 3,5 t - Calculation of the mechanical strength of steel drawbars

NF U14-012:2011 农用车辆:牵引车辆和拖车之间的机械连接装置.第5部分:非旋转式U形钩联轴器规范.

Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 5 : specifications for non-swivel clevis couplings.

SAE J847-2011 拖车牵引孔与牵引钩(联结器)性能

This SAE Recommended Practice applies to highway trailer tow bar eye-type applications, including multiple trailers.

Trailer Tow Bar Eye and Pintle Hook/Coupler Performance

ISO 6489-5:2011 农业车辆.被牵引车辆与牵引车辆之间的机械连接.第5部分:非旋转U形夹联轴器规格

This part of ISO 6489 specifies the requirements for non-sWivel clevis couplings Used for the attachment of agricultural trailers and implements equipped with a swivel hitch ring as specified in ISO 5692-3 to the rear of self-propelled agricultural vehicles.

Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 5: Specifications for non-swivel clevis couplings

ISO 5692-3:2011 农业车辆.被牵引车辆的机械连接装置.第3部分:旋转连接环

Agricultural vehicles - Mechanical connections on towed vehicles - Part 3: Swivel hitch rings

ANSI/ASABE/ISO 24347:2009 农用车辆.拖车与牵引车之间的机械连接.球型耦合器(80 mm)的尺寸规格

Specifies the dimensions and location of a ball-type coupling device of 80 mm nominal diameter, whose male part fitted to an agricultural towing vehicle and female part fitted to a towed, non-balanced vehicle provides mechanical connection between the two vehicles, where the downwards vertical static load does not exceed 40 kN. This standard is intended for higher speed towing applications when the allowable speed exceeds 40 km/h.

Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of ball-type coupling device (80 mm)

ANSI/ASABE S6489-3-2009 农用车辆.拖车与牵引车之间的机械连接.第3部分:拖拉机牵引杆

Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 3: Tractor drawbar

SANS 1477-1:2008 牵引车和拖车之间的气力制动系统连接.第1部分:接触式联结器

Specifies the dimensions required for the correct mating of contact type couplings for connecting the pneumatic braking systems of drawing (towing) vehicles to drawn vehicles (trailers or semi-trailers). Also covers performance and marking requirements a

Pneumatic braking system connections between drawing and drawn vehicles Part 1: Contact type couplings

SANS 1505-3:2007 牵引篷车和轻型拖车用球形连接器和拖架．第3部分：球头联节

Specifies requirements for coupling sockets intended to be fitted to a caravan or a light trailer of gross vehicle mass (GVM) not exceeding 3 500 kg.

Ball type couplings and towing brackets for towing caravans and light trailers Part 3: Coupling sockets

SANS 1505-2:2007 牵引篷车和轻型拖车用球形连接器和拖架 ．第2部分：连接球和球形支架

Specifies requirements for coupling balls and ball supports intended to be fitted to the towing brackets of vehicles of gross vehicle mass (GVM) not exceeding 22 000 kg, and intended for towing a caravan or a light trailer of GVM not exceeding 3 500 kg.

Ball type couplings and towing brackets for towing caravans and light trailers Part 2: Coupling balls and ball supports

ISO 1103:2007 道路车辆.旅居挂车和轻型挂车的连接球.尺寸

This International Standard lays down the dimensions necessary for the compatibility of mechanical coupling devices between light trailers or caravans and towing vehicles, when the latter are fitted with a coupling ball. The clearance space around the coupling ball is intended to allow coupling and decoupling of towed vehicles, as well as safe operation during coupling and uncoupling of mechanical devices. This International Standard applies to coupling balls designed to couple caravans and light trailers of categories O1 and O2 1) to vehicles of categories M or N. It does not necessarily apply to special trailers drawn by special vehicles.

Road vehicles - Coupling balls for caravans and light trailers - Dimensions

SANS 1505-1:2007 牵引篷车和轻型拖车用球形连接器和拖架． 第1部分：拖架和一体式牵引装置

Specifies requirements for towing brackets and integrated towing devices intended to be fitted to towing vehicles of gross vehicle mass (GVM) not exceeding 22 000 kg, and intended for towing a caravan or a light trailer of GVM not exceeding 3 500 kg.

Ball type couplings and towing brackets for towing caravans and light trailers Part 1: Towing brackets and integrated towing devices

ISO 12357:1999/cor 1:2007 商用道路车辆.刚性牵引杆用牵引联结器和牵引杆挂钩孔.强度试验.技术勘误1

This standard is Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Strength tests; Technical Corrigendum 1

Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Strength tests; Technical Corrigendum 1

ISO 12357-2:2007 商用道路车辆.刚性牵引杆用牵引联结器和牵引杆挂钩孔.第2部分:专用强度试验

This International Standard lays down test conditions and strength requirements to be met by NOTE This International Standard does not apply if both values, 10 % and 1 000 kg, are not exceeded. Such towed vehicles are defined as centre-axle trailers and are subject to ISO 12357-1.

Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Part 2: Strength tests for special applications

CGA G-1.6-2007 机动乙炔拖车系统用推荐实施规程.第5版

This publication presents safe practices recommended for the design, construction, and operation of mobile acetylene trailer systems (MATS) containing acetylene cylinders manifolded for the purposes of charging, transporting, and discharging large quantities of acetylene. It also covers ground-mounted auxiliary equipment used in conjunction with the MATS such as piping, regulators, flash arrestors, and meters.

RECOMMENDED PRACTICES FOR MOBILE ACETYLENE TRAILER SYSTEMS FIFTH EDITION

BS ISO 18207:2006 道路车辆.3.5吨以下拖车在疲劳试验后联轴节球体用焊接牵引支撑架的控制

It defines a simplified and reliable check procedure of the mechanical coupling devices between light trailers and towing vehicles, covered by ISO 3853 and European regulation (94/20/CE), which specify a dynamic test of mechanical resistance at the conclusion of which these devices should present neither fractures, splits, cracks, nor visible external deteriorations caused by the test. It is applicable to all the components of the mechanical coupling devices whose failure can cause the fracture of the attachment, manufactured out of steel, forged steel or cast steel (i.e. generally in ferromagnetic materials). In the case of use of other materials, the manufacturer will check their compatibility with the methods of non destructive testing.

Road vehicles - Trailers up to 3,5 t. Control of welded towing brackets for coupling ball after fatigue testing

JT/T 651-2006 牵引杆挂车转盘

本标准规定了牵引杆挂车转盘的型号、基本参数系列、技术条件、检验规则、标志、使用说明书、运输和贮存。 本标准适用于最大总质量不大于20000kg的牵引杆挂车使用的转盘（以下简称转盘）。

Draw-bar trailer turntable

SANS 1477-3:2005 牵引车和拖车之间的气力制动系统连接．第3部分：使用接触式和手掌式联结器的车辆的连接安排

Covers the arrangement of the connections of two-line pneumatic braking systems installed on drawing vehicles and drawbar trailers or semi-trailers, using contact type or palm type couplings.

Pneumatic braking system connections between drawing and drawn vehicles Part 3: The arrangement of connections on vehicles, using contact type or palm type couplings