T72 牵引装置 标准查询与下载
共找到 108 条与 牵引装置 相关的标准，共 8 页
This SAE Recommended Practice provides a means to observe and evaluate a towed vehicle under a variety of road conditions to determine its behavior. The drivetrain should be evaluated by conducting sAE J1144.
(R) Towed Vehicle/Tow Equipment Attachment Test Procedure - Passenger Cars, Vans, and Light Duty Trucks, Recommended Practice February 1994
- ICS
- 43.040.70;43.080.01
- CCS
- T72
- 发布
- 1994-02-01
- 实施
- 2000-01-27
This SAE Recommended Practice applies to upper coupler kingpins for commercial trailers and semitrailers conforming to the dimensional requirements of SAE J700 when new and originally installed. The dimensions of SAE J700 are the frame of reference for this document. The purpose of this document is to establish maximum parameters for kingpin wear and to suggest a gauge configuration for inspecting kingpin wear. Kingpins exceeding the conditions of this specification must be removed from service and replaced.
Kingpin Wear Limits Commercial Trailers and Semitrailers
- ICS
- 43.080.10;43.040.70
- CCS
- T72
- 发布
- 1993-06
- 实施
Upper Coupler Kingpin - Commercial Trailers and Semitrailers
- ICS
- 43.080.10;43.040.70
- CCS
- T72
- 发布
- 1993-02
- 实施
The dimensions are stated, as well as the associated wheel radius and test forces.#,,#
Wheel chocks for motor vehicles and trailers
- ICS
- 43.040.40
- CCS
- T72
- 发布
- 1992-11
- 实施
This International Standard specifies the strength requirements to be met by mechanical coupling de- vices fitted to trailers or caravans of categories 01 and 02 in the case of ball couplings in accordance with ISO 1103 and a static load within the limits fixed in ISO/TR 4114.
Caravans and light trailers; couplings; strength tests
- ICS
- 1060;5020;4930
- CCS
- T72
- 发布
- 1991-03
- 实施
Commercial road vehicles. Mechinal connections between, towing vehicles and trailers. 50 mm drawbar coupling.
- ICS
- 43.040.70
- CCS
- T72
- 发布
- 1990-12-01
- 实施
- 1990-12-20
Commercial road vehicles. Mechanical connections between towing vehicles and trailers. 40 mm drawbar coupling.
- ICS
- 43.040.70
- CCS
- T72
- 发布
- 1990-12-01
- 实施
- 1990-12-20
Agricultural vehicles. Mechnical connections on towing vehicles. Part 4 : ring-bolt. Specifications.
- ICS
- CCS
- T72
- 发布
- 1990-12-01
- 实施
- 1990-12-05
Road vehicles. Mechanical coupling between tractors and semi-trailers. Interchangeability.
- ICS
- 43.040.70
- CCS
- T72
- 发布
- 1990-12-01
- 实施
- 1990-12-20
Modifies dimensions in figure 1 on page 1 and in figure 3 on page 2.
Road vehicles; 50 semi-trailer fifth wheel coupling pin; basic and mounting/interchangeability dimensions; technical corrigendum 1
- ICS
- 43.040.70
- CCS
- T72
- 发布
- 1990-10
- 实施
- 1990-10-15
This British Standard specifies requirements for a towing jaw, towing hook, drawbar eye and lug and forecarriage pins for use in connections between a towing vehicle and a trailer of up to either 3500 kg or 5000 kg gross mass. NOTE 1. The gross mass is taken to be gross laden masses where more than one trailer is drawn. The drawbar eye is for use with two or four wheeled trailers, excepting trailers forming part of an articulated vehicle. NOTE 2. The titles of the publications referred to in this standard are listed on the inside back page.
Specification for towing connections for trailers up to 5000 kg gross mass
- ICS
- 43.040.70;43.080.10;43.100
- CCS
- T72
- 发布
- 1989-07-31
- 实施
- 1989-07-31
Road vehicles. Caravans and light trailers. Calculation of the mechanical strength of the drawbar. Part 1 : steel drawbars.
- ICS
- 43.040.70
- CCS
- T72
- 发布
- 1989-04-01
- 实施
- 1989-04-20
Basic, mounting and interchangeability dimensions.
Specification for dimensions of '50' fifth wheel king pin for semi-trailers
- ICS
- 43.040.70
- CCS
- T72
- 发布
- 1989-03-31
- 实施
- 1989-03-31
Commercial road vehicles; drawbar couplings and eyes for hinged drawbars; strength test
- ICS
- 5030;5020
- CCS
- T72
- 发布
- 1988-11
- 实施
- 1988-11-01
Commercial road vehicles; fifth wheel coupling pins; strength tests
- ICS
- 5030;5020
- CCS
- T72
- 发布
- 1988-10
- 实施
- 1988-10-01
The location is given for the coupling point between towing vehicle and towed vehicle.
Road vehicles; trailers; location of centre of coupling
- ICS
- 43.040.70
- CCS
- T72
- 发布
- 1988-07
- 实施
This SAE Recommended Practice applies to highway trailer tow bar eye-type applications, including multiple trailers.
Trailer Tow Bar Eye and Pintle Hook/Coupler Performance
- ICS
- 43.040.70;43.080.10
- CCS
- T72
- 发布
- 1987-11-01
- 实施
- 2011-07-18
This standard is dealing with trailer coupling on industrial trucks and on its trailers. The aim of the standard is to insure the exchange of trailer coupling and also that the trailer couplings are corresponding to the tiller according to DIN 8454. The standard is dealing also with safety requirements and editional requirements for the official traffic as far as trailer couplings are concerned.
Industrial trucks; trailer couplings; connecting dimensions, requirements, testing
- ICS
- 5020;3640
- CCS
- T72
- 发布
- 1987-03
- 实施
- 1987-03-01
Gives a simplified procedure, where the vertical static force on the coupling head is not less than 25 kgf or greater than 75 kgf.
Drawbars for caravans and light trailers - Method of calculation for the mechanical strength of steel drawbars
- ICS
- 43.040.60;43.100
- CCS
- T72
- 发布
- 1987-01-30
- 实施
- 1987-01-30
Road vehicles. Fifth wheel for 50 and 90 mm coupling pin. Dimensional characteristics and mounting.
- ICS
- 43.040.70
- CCS
- T72
- 发布
- 1986-10-01
- 实施
- 1986-10-20
