U05 船舶用材料及其检验方法 标准查询与下载
共找到 612 条与 船舶用材料及其检验方法 相关的标准，共 41 页
本标准适用于钢质船舶长期间或浸泡和接触海水的涂料漆膜耐盐水性能的测定。
Ship coatings--Determination of resistance to salt water--Salt water and hot salt water immersion method
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 1989-03-31
- 实施
- 1990-01-01
本标准规定了在高温或明火的灼烧条件下，测量固体材料产烟性能所使用的设备、试样、试验程序、试验结果的计算和评定方法。 本标准适用于固体材料或部件（包括在使用状态下呈固态的原液体、半固体材料及直径不大于6.35mm的绝缘导线）在有焰或无焰条件下产烟的比光密度测定。
Test method for specific optical density of smoke generated by solid materials
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 1989-03-31
- 实施
- 1989-10-01
Dynamic test mehthod for performance of marine antifouling coatings
- ICS
- 87.040
- CCS
- U05
- 发布
- 1987-05-25
- 实施
- 1988-05-01
Test method for resistance-reducing performance of self-polishing antifouling paint—disc torque method
- ICS
- CCS
- U05
- 发布
- 1987-05-25
- 实施
- 1988-05-01
本标准规定了在试验室内评定自抛光防污漆降阻性能的试验方法。
Test method for performance of reduces frictional resistance of self-polishing antifouling coatings--Method of round dish rotor moments
- ICS
- 87.040
- CCS
- U05
- 发布
- 1987-05-25
- 实施
- 1988-05-01
本标准规定了在天然海水中评定防污漆防污性能的动态试验方法。
Dynamic test method for performance of marine antifouling coatings
- ICS
- 87.040
- CCS
- U05
- 发布
- 1987-05-25
- 实施
- 1988-05-01
本标准适用于船舶及海洋工程外加电流阴极保护系统辅助阳极的屏蔽涂料。
General specification for anodic shield coating of ship and ocean engineering
- ICS
- 87.040
- CCS
- U05
- 发布
- 1987-05-25
- 实施
- 1988-05-01
本标准适用于船舶及海洋工程用金属材料在天然条件下的全浸、潮差和飞溅海水腐蚀试验，评定材料的耐腐蚀性能。
The testing methods for seawater corrosion in natural environment of metallic materials for ship and offshore structures
- ICS
- 77.040.30
- CCS
- U05
- 发布
- 1986-05-13
- 实施
- 1987-04-01
HIGH STRENGTH, HIGH ELONGATION ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M7H57-A1)
- ICS
- 77.140
- CCS
- U05
- 发布
- 2020-11-24
- 实施
This document specifies a laboratory test method for screening anti-fouling paints in a flow-through system using mussels as the test organism. It is intended to be used in conjunction with ISO 21716-1, which specifies the general requirements. The purpose of the test is to determine if there is a difference in mussel settlement on painted test panels compared with mussel settlement on inert non-toxic control panels under the conditions of the test. Examples of statistical analysis to determine if the difference in mussel settlement is statistically significant are given in Annex A.
Ships and marine technology - Bioassay methods for screening anti-fouling paints - Part 3: Mussels
- ICS
- 13.020.99
- CCS
- U05
- 发布
- 2020-11-00
- 实施
This document specifies materials and finish, dimensions for interchangeability, tolerances, parallelism and flatness, testing, marking and designation of thermally toughened safety glass panes for windows complying with ISO 3903 and side scuttles complying with ISO 1751.
Ships and marine technology - Thermally toughened safety glass panes for windows and side scuttles
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2018-02-01
- 实施
Specification for composite lightweight hulls for deep sea submersibles
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2016-07-28
- 实施
- 2017-01-01
Fillet weld fracture test method
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2016-04-05
- 实施
- 2016-09-01
Test method for transverse bending of marine steel pipes
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2016-04-05
- 实施
- 2016-09-01
Ships and marine technology - Toughened safety glass panes for rectangular windows and side scuttles - Punch method of non-destructive strength testing (ISO 614:2012)
- ICS
- 47.020.10
- CCS
- U05
- 发布
- 2015-12
- 实施
本标准规定了船用机座环氧浇注垫片（以下简称垫片）的要求、试验方法和检验规则。 本标准适用于船舶主机、发电机组机座环氧浇注垫片的设计和施工。甲板机械、艉轴管、舵轴承衬套及其他设备用环氧浇注垫片亦可参照执行。
Marine epoxy resin bed plate gaskets
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2015-04-30
- 实施
- 2015-10-01
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
- ICS
- 77.140.50;77.140.70
- CCS
- U05
- 发布
- 2015
- 实施
- 2016-04-01
本标准规定了船用轴承合金钢砂(以下简称钢砂)的定义、分类、要求、试验方法、检验规则及包装、标志、运输、贮存等要求。本标准适用于船舶涂装前表面处理用钢砂的制造和检验。
Bearing alloy steel grit for ship
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2014-05-06
- 实施
- 2014-10-01
本标准规定了水声换能器用透声橡胶(以下简称透声橡胶)的分类、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于水声换能器用透声橡胶的配方设计、制造和验收。其他用途的透声橡胶也可参照使用。
Entrant sound rubber for underwater acoustics transducer
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2014-05-06
- 实施
- 2014-10-01
本标准规定了船舶压载水电解法处理系统(以下简称“处理系统”)的设计指标、设备选型、处理系统的组成及要求和安装要求。本标准适用于船舶压载水电解法处理系统的设计与安装。
Design and installation of ballast water treatment system for ships using electrolytic method
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2014-05-06
- 实施
- 2014-10-01
