U10 船舶总体综合 标准查询与下载

GJB 534B-2009 舰船直升机舰面系统通用要求

本标准规定了驱逐舰、护卫舰、登陆舰和军辅船等舰船与设计允许的直升机的配合要求、应设置的直升机舰面系统及其基本技术要求。 本标准适用于驱逐舰、护卫舰、登陆舰和军辅船等舰船(以下均简称舰)的直升机舰面系统的设计、建造、试验与验收，其他水面舰船的直升机舰面系统的设计、建造、试验与验收可参照使用。 本标准不适用于航空母舰。

General requirements for helicopter facilities of non-aviation ships

GJB 6688-2009 舰载火箭炮武器系统设汁定型海上试验规程

本标准规定了舰艇火箭炮武器系统（以下简称被试系统）设计定型海上试验的基本内容、方法和要求。 本标准适用于在靶场进行的被试系统设计定型海上试验。

Code for finalization sea test of weapon system for naval rocket launcher

GJB 6687-2009 潜艇作战系统鉴定试验规程

本标准规定了潜艇作战系统鉴定试验的基本要求、试验项目、试验程序、数据录取、数据处理、试验结果评定和实验报告编写。 本标准适用于潜艇作战系统（以下简称系统）海上设计鉴定（定型）试验，研制性试验亦可参照使用。

Evaluation test code for submarine combat system

ISO 28522:2009 船舶和海洋技术.液压油系统.组装和冲洗用指南

Ships and marine technology - Hydraulic oil systems - Guidance for assembly and flushing

ISO 21072-1:2009 船舶和海洋技术.海洋环境保护:撇油器的性能试验.第1部分:移动水域条件

Ships and marine technology - Marine environment protection: performance testing of oil skimmers - Part 1: Moving water conditions

ISO 28520:2009 船舶和海洋技术.润滑油系统.清洁和冲洗等级用指南

Ships and marine technology - Lubricating oil systems - Guidance for grades of cleanliness and flushing

ISO 28523:2009 船舶和海洋技术.润滑油和液压油系统.清洁和颗粒污染物的测定取样指南

Ships and marine technology - Lubricating and hydraulic oil systems - Guidance for sampling to determine cleanliness and particle contamination

BS ISO 8468:2007 船舶和海上技术.船桥布置和相关设备.要求和指南

Ships and marine technology - Ship's bridge layout and associated equipment - Requirements and guidelines

KS V ISO 8193:2008 造船.船体壳镶板描述

이 표준은 기관 사이의 정보 전송에 필요한 선체 외판을 기술하는 데이터에 대하여 규정한다.

Shipbuilding-Shell plating information

SAE J1853-2008 手动绞车拖船型号

This SAE Standard includes spur gear and direct drive type hand-cranked winches as used on boat trailers. This does not include brake type winches as used in boat lift, davit, or industrial applications.

Hand Winches-Boat Trailer Type

GJB 6433-2008 潜艇总段建造船体结构的压力和密性试验方法

本标准规定了总段建造的常规潜艇船体结构的压力、密性试验要求和方法。 本标准适用于总段建造的常规潜艇的压力和密性试验。总段建造的核潜艇的压力和密性试验参照本标准执行。

Method of pressure and tightness test for hull structure of block constructed submarine

GJB 6415-2008 潜艇总段建造重量重心控制要求

本标准规定了常规潜艇（以下简称潜艇）的重量、重心在设计、建造和试验阶段的控制要求。 本标准适用于采用总段模式的潜艇首制艇的建造，核潜艇可参照执行。

Requirements for controling the weight and gravity center in submaring hull construction using the block constructing method

CB/T 3977-2008 船舶配载计算软件系统设计要求

本标准规定了船舶配载计算软件系统（以下简称软件系统）的一般要求、输入功能、计算功能和输出功能等要求。 本标准适用于运载液货、干散货、集装箱船舶等软件系统的设计。

Design requirement of loading computational software system for ship

GJB 6434-2008 潜艇船体总段建造精度要求

本标准规定了采用总段建造技术建造的潜艇船体耐压结构、非耐压结构、内部船体结构等的制造及安装的精度要求和总段对接区域对接精度要求。 本标准适用于采用总段建造技术建造的常规潜艇的建造。采用总段建造的核潜艇的建造可参照执行。

Accuracy requirements of block of hull construction for submarine

ASTM F1754-08 海上船支结构检验依据的标准指南

1.1 This guide covers information to develop and implement a marine vessel inspection process. It is intended to provide considerations for persons interested in planning, organizing, and implementing a structural survey plan for a marine vessel, especially during the design phase of the vessel. It is intended to be used in conjunction with any other required inspection or survey requirements but can form the basis for such planning in the absence of other such applicable requirements. 1.2 This guide provides owners, operators, shipyards, and designers with a plan for developing a detailed inspection process that covers all stages of the operating life of a marine vessel, including the design, construction, and in-service periods. This plan may be developed and used in concert with classification society and flag state surveys and inspections. 1.3 This guide also provides the basis for development of a recommended corrective action plan for typical structural deficiencies or deviations, or both. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 All portions of this guide may not be applicable to all vessels or shipyards since many yard-specific standards to ensure contracted level of quality are in existence.

Standard Guide for Marine Vessel Structural Inspection Considerations

ANSI/NFPA 1925-2008 海上消防船舶

This standard shall provide minimum requirements for marine fire-fighting vessels.1.1.2 This standard shall also provide minimum maintenance and testing requirements.

Standard on Marine Fire-Fighting Vessels

GJB 6111-2007 滑落式泛水装置规范

Specification for slip-on flashings

ISO 18072-1:2007 船舶和海洋技术.船舶结构.第1部分:船舶结构极限状态评估的一般要求

This part of ISO 18072 provides general requirements for the limit state assessment of ship structures primarily used in the transport of commercial goods and cargos. For the purposes of assessment, the effects of actions on ship structures are considered in respect of the following limit states: serviceability, ultimate, fatigue and accidental. The requirements of this part of ISO 18072 are applicable to global ship structures, as well as the structural components and details forming such structures. The requirements are applicable during the design, construction and operation of ship structures. The requirements are also applicable to the conversion of existing structures. Aspects related to quality control and quality assurance are also addressed. Whilst the major part of this document assumes the use in an assessment of a partial-factor approach, an approach based on probabilistic methods may also be adopted. Whilst compliance with the requirements of this and other parts of ISO 18072 may be used to demonstrate structural adequacy of a ship structure or its component, compliance with other international and standards, rules and regulations is required, as applicable to the ship considered. The ship owner responsible for ensuring compliance with all such standards, rules and regulations.

Ships and marine technology - Ship structures - Part 1: General requirements for their limit state assessment

HJB 371.6-2007 051B型驱逐舰修理技术要求 第6部分：舵装置

Repair Technical Requirements for Type 051B Destroyer Part 6: Rudder Device

HJB 371.4-2007 051B型驱逐舰修理技术要求 第4部分：汽轮凝水-增压泵

Technical Requirements for Type 051B Destroyer Repair Part 4: Turbine Condensate-Boost Pump