U22 甲板机械 标准查询与下载

DIN 84154:1994 翘曲短(符合ISO 6482:80的类型)

The document applies to ship's winches. The warping ends mounted on the extensions of winch shafts are used for hauling in ropes (steel wire ropes or fibre ropes). It specifies the types, nominal sizes, construction, material and the designation of the warping ends. It contains warping ends of the long type, only, since the See-Berufsgenossenschaft (Marine Employers' Liability Insurance Association) do not permit warping ends of the short type (hitherto type F) on safety gounds. Should these short type warping ends be employed in cases where the rules of the See-Berufsgenossenschaft do not apply, they can be ordered as type C according to ISO 6482.

Warping ends (types to ISO 6482:1980)

ASTM F1523-94(2007) 按照水体分类选择水栅的标准导则

This guide is to be used to assist in the selection of containment boom in accordance with water body classifications. A small number of key parameters that generally affect boom performance have been used in Table 1, in order to enable the user to readily identify general criteria for boom selection. Many factors, other than those listed in Table 1, may be important in selecting containment boom for a particular application. Such factors include: flotation element length, wave length, the effect of stronger than minimum required strength members, shock loads, abrasion resistance, stability in roll, resistance to bridging, interval between anchor points and hand holds, use of reflectors or lighting, compatibility with fresh or salt water, and resistance to sunlight exposure. The values given in Table 1 are the recommended minimums for general purpose booms. As identified in 2.3, operational considerations may require trade-offs in boom properties. Special purpose booms, and general purpose booms used in special circumstances, may perform effectively with boom property values above or below those recommended in Table 1. Effective operation of oil spill control equipment depends on many factors, of which the prevailing environmental conditions are just a few. Factors such as, but not limited to, deployment techniques, level of training, personnel performance, and mechanical reliability can also affect equipment performance.1.1 This guide covers the selection of containment boom that may be used to control spills of oil and other substances that float on a body of water.1.2 This guide does not address the compatibility of spill control equipment with spill products. It is the user''s responsibility to ensure than any equipment selected is compatible with anticipated products.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Selection of Booms in Accordance With Water Body Classifications

CB/T 3567-1993 船用乘客电梯

本标准规定了船用乘客电梯的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于电力拖动的船用乘客电梯。

Marine Passenger Elevator

CB 1227-1993 舰用起锚绞盘

本标准规定了舰用电动或液压驱动的起锚绞盘的分类、技术要求、试验方法和检验规则以及标志、包装、运输和贮存。 本标准适用于水面战斗舰艇用起锚绞盘，军辅船及潜艇用起锚绞盘可参照采用。

ship anchor winch

DLA A-A-56028-1993 镶边的圆孔眼

The purchaser should specify the type in the contract or purchase order.

EYELET, LACING

NAVY MIL-STD-1386-63 NOTICE 2-1993 舰队事务负载单位MK586MOD0容器MK55水雷飞行齿轮MILVAN容器及相关项目危险原料装载

This notice should be filed in front of MIL-STD-1386-63(0S), dated 31 October 1975.

LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS FLIGHT GEAR, UNDERWATER MINE MK 55 IN CONTAINER MK 586 MOD 0 FLEET ISSUE UNIT LOAD

NAVY MIL-STD-1325-85 NOTICE 3-1993 MK 79 MOD 0负载2000磅MK 84 MODS 0,1,AND 2通用炸弹危险原料铁路车装载

MIL-STD-1325-175(OS) is inactive for new design and are no longer used by the Navy except for replacement purposes.

RAILCAR LOADING OF HAZARDOUS MATERIALS BOMB, GENERAL PURPOSE, MK 84 MODS 0, 1, AND 2 (2000 LB.) IN UNIT LOAD ADAPTER MK 79 MOD 0

NAVY MIL-STD-1386-59 NOTICE 2-1993 国内负载单位MK103MOD0板条箱MK57型水雷空MK2MOD2爆炸部件MILVAN容器及相关项目危险原料装载

The following military specification and specification sheets of MIL-E-24142B(SH) have been reviewed and are determined to be valid for use in acquisition.

LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS EXPLOSIVE SECTION MK 2 MOD 2 (EMPTY) FOR MK 57 UNDERWATER MINE IN CRATE MK 103 MOD 0 DOMESTIC UNIT LOAD

NAVY MIL-STD-1325-175 NOTICE 4-1993 非鞍状舰队事务单位装载MK79MOD0单位负载适配器热保护2000磅MK84MOD3炸弹危险原料铁路车装载

exMcIeLpt SfToDr re1p3l2a5ce1m75en(Ot pSu) ripso isneasc. Tive for new design and are no longer used by the Navy except for replacement purpose.

RAILCAR LOADING OF HAZARDOUS MATERIALS BOMB, 2000 LB. MK 84 MOD 3 (THERMALLY PROTECTED) IN UNIT LOAD ADAPTER MK 79 MOD 0 WITH SADDLESS FLEET ISSUE UNIT LOAD

NAVY MIL-STD-1386-60 NOTICE 2-1993 国内负载单位MK104板条箱MK57水雷MK2MOD3机械装置车厢MILVAN容器及相关项目危险原料装载

This notice should be filed in front of MIL-STD-1386-60(OS), dated 28 February 1975.

LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS MECHANISM COMPARTMENT MK 2 MOD 3 FOR MK 57 UNDERWATER MINE IN CRATE MK 104 DOMESTIC UNIT LOAD

NAVY MIL-V-17501 F (2)-1993 弹药舱喷淋和飞机库甲板喷淋控制阀

This amendment forms a part of MIL-V-l7501F(SH), dated 29 October　1990, and is approved for use by the Naval Sea Systems Command,Department of the Navy and is available for use by all　Departments and Agencies of the Department of Defense.

VALVES, CONTROL TYPE, MAGAZINE, AND HANGAR DECK SPRINKLER

NAVY MIL-STD-1322-109-1993 MK461MOD0或MOD1型标准冲锋枪及船用全辐射型集装箱指示部分单位装载,在国内及海外使用

UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT STANDARD MR OR ER GUIDANCE SECTION IN CONTAINER MK 461 MOD 0 OR MOD 1

UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT STANDARD MR OR ER GUIDANCE SECTION IN CONTAINER MK 461 MOD 0 OR MOD 1

ASME B30.8 INT-1989 说明:水上起重机和水上桅杆起重机

B30.8 applies to cranes and derricks mounted on barges or pontoons. The requirements of this volume are applicable only to floating cranes and floating derricks used for vertical lifting and lowering of freely suspended, unguided loads.

Interpretations: Floating cranes and floating derricks

ASME B30.8 INT-1990 说明:水上起重机和水上桅杆起重机

B30.8 applies to cranes and derricks mounted on barges or pontoons. The requirements of this volume are applicable only to floating cranes and floating derricks used for vertical lifting and lowering of freely suspended, unguided loads.

Interpretations: Floating cranes and floating derricks

CB/T 3012-1992 机舱起重机

本标准规定了机舱起重机的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于船舶机舱设备检修用起重机。

nacelle crane

NAVY MIL-H-81735 B-1992 耐冲击飞行甲板船员的头盔

This specification covers the requirements for impact r e s i s t a n t 1.2 Classification . The impact r e s i s t a n t , f l i g h t deck crewman's helmets s h all 1.2.1 Size. The cloth helmet s h all be of the following s i z e s : f l i g h t deck crewman's helmets and components (see 6.2.b).

HELMETS, FLIGHT DECK CREWMAN'S, IMPACT RESISTANT

NAVY MIL-STD-1322-108-1992 国内及海外装船任务装载

FOR UNITIZING ONE %PACK, REPEAT PICTORIAL SEOUENCE AS SHOWN, EXCEPT OMIT ONE UNITIZED 8-PACK LOAD AND USE THE SMALLER END FRAME ASSY (DETAIL F) IN LIEU OF THE LARGER END FRAME ASSY (DETAIL GL FOR STRAPPING PROCEDURES SEE PAGE 4

UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT TASK"A" ASSY TEST CHARGES ON WOODEN SKID WITH COVER& END FRAME ASSY'S (8 OR 16-PACK UNIT LOADS)

CB/T 3492-1992 船用臂架起重机安装技术要求

本标准规定了船用臂架起重机厂内装配与船上安装应具备的条件和方法。 本标准适用GB/T 12932《船用臂架起重机》所规定的各类起重机。其他类型的船用起重机可参照执行。

Technical requirements for installation of marine jib cranes

CB/T 3491-1992 船用臂架起重机金属结构制造技术要求

本标准规定了船用臂架起重机金属结构的制造技术要求。 本标准适用于GB/T 12932所规定的起重机，其他类型的起重机亦可参照执行。

Technical requirements for the manufacture of metal structures of marine jib cranes

CB/T 3120-1992 船用顶索定位绞车

本标准规定了船用顶索定位绞车的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于船用吊货杆起重设备有动力及外输入动力绞车。 

Marine top rope positioning winch