U48 轴系设备 标准查询与下载

DIN ISO 6050:1994 造船.球鼻艏和侧推器符号

The document specifies the symbols for bulbous bow and side thruster to be used on ships' hulls to indicate their presence.

Shipbuilding; bulbous bow and side thruster symbols; identical with ISO 6050:1987

CB/T 3516-1993 柴油机用盘车机

本标准规定了柴油机用盘车机的技术要求、试验方法、检验规则。 本标准适用于电机功率为0.75～7.5kW各种结构型式的盘车机。

Barring machine for diesel engine

CB 1223-1993 潜艇推进电机安装技术条件

本标准规定了潜艇主推进电机艇上定位、安装、检验等技术要求。 本标准适用于直接传动和电力传动的主推进电机在潜艇上安装。 其它推进电机的安装可以参照执行。

Technical conditions for the installation of submarine propulsion motors

CB/T 3607-1993 螺旋桨及尾轴安装质量要求

本标准规定了无键和有键螺旋桨及尾轴安装的质量要求。 本标准适用于3000t以上钢质海船的建造，对修理船舶也可参照使用。

Quality requirements for propeller and tail shaft installation

JB/T 6652-1993 船用齿轮箱离合器片 技术条件

本标准规定了船用齿轮箱离合器片的技术要求、试验方法、检验规则和标志、包装、贮存等要求。 本标准适用于船用齿轮箱湿式摩擦离合器片。离合器片包括粉末冶金摩擦片和钢质对偶片。

Specifications for marine gearbox clutch plates

ANSI/SAE J620-1993 与配备驱动环型偏心离合器及安装船用齿轮发动机的工业动力输出轴一起使用的工业发动机的飞轮

Flywheels for Industrial Engines Used With Industrial Power Take-Offs Equipped With Driving-Ring Type Overcenter Clutches and Engine Mounted Marine Gears

NAVY A-A-50599-1992 便携式抽烟通风轴扇

This Commercial Item Description specifies requirements for a portable fan that would be used without a ventilation hose to desmoke or ventilate spaces that have direct access to the weathe

FAN, TUBEAXIAL, PORTABLE, DESMOKING, AND VENTILATING

CB/T 3454-1992 船用离合器摩擦片结构型式和主要参数

本标准规定了摩擦副的铜基粉末冶金摩擦片和对偶片的基本型式和主要参数。 本标准适用于船用湿式片式摩擦离合器和制动器的摩擦片和对偶片。

Structural type and main parameters of marine clutch friction plate

CB/T 3465-1992 船用大功率高速发动机挠性联轴器

本标准规定了船用主动力装置、辅助动力装置中发动机输出端采用的膜片联轴器、膜盘联轴器及鼓型齿联轴器的分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于额定转速不小于3000r/min，额定功率不小于2000kW的联轴器。 

Marine high-power high-speed engine flexible coupling

DIN 3990-31:1990 圆柱齿轮承载能力计算.船用减速齿轮箱应用标准

This standard specifies methods for the calculation of surface durability and tooth root strength of cylindrical involute gears for marine gears. The standard applies to spur, helical, and double helical gears with or without modifications of tooth profile and helix corrections. It applies to gears with oil injection lubrication.

Calculation of load capacity of cylindrical gears; application standard for marine gears

BS 7161:1990 舷内发动机游艇螺旋桨轴端和轴套规范

Dimensions for interchangeability of propellor bosses and propellor shaft ends in the shaft diameter range of 20 to 160 mm with a taper of 1:10.

Specification for propeller shaft ends and bosses for inboard-engined pleasure craft

CB/T 3892-1999 救生艇轴系技术条件

Specifications for lifeboats shafting

CB* 82-1988 船舶轴系轴颈直径

本标准规定了船舶轴系的轴颈直径。 本标准适用于船舶轴系的滑动式中间轴承、推力轴承及隔舱坡料函所支承的轴颈直径。 本标准不适用于螺旋桨轴轴颈及滚动轴承所支承的轴颈。

Ship shafting journal diameter

DIN ISO 8314:1988 造船和海上结构.跨架轴承和导向支承轴承的耳轴件

This standard specifies dimensions and materials for trunnion pieces and locating bolts for assemblies of span bearings and cargo runner lead block bearings used in operating ship derrick booms.

Shipbuilding and marine structures; trunnion pieces for span bearings and lead block bearings; identical with ISO 8314, edition 1987

CB*/Z 350-1987 船舶螺旋桨有键联接推入量计算

本标准适用于各种轴颈的螺旋桨和桨轴的有键联接。

Calculation of pushing amount of ship propeller with coupling

CB* 3299-1987 船舶渐开线圆柱齿轮承载能力计算方法

本标准适用于船舶主传动钢制内、外啮合渐开线直齿、斜齿和人字齿圆柱齿轮传动。船舶其他传动齿轮也可参照使用。 本标准包括齿面接触强度和轮齿弯曲强度两种校核计算方法。

Calculation method of bearing capacity of ship involute cylindrical gear

CB* 789-1987 滚子上舵承

Roller upper rudder bearing

CB* 790-1987 滑动水密下舵承

Sliding watertight lower rudder bearing

CB/Z 219-1987 水面舰艇螺旋桨设计计算方法

Propeller Design Method for Naval Surface ships

CB/Z 215-1987 空泡水筒均流中螺旋桨模型试验规程

Code for Propeller Cavitation Tests in Uniform Flow Carried Out in Cavitation Tunnel