V15 复合材料与固体燃料 标准查询与下载

DLA A-A-51166 C-2005 碳化钨或高速反向锥形旋转锉刀

This commercial item description (CID) covers the requirements for inverted cone shaped high speed steel or tungsten carbide rotary files of the standard heavy duty commercial type, commonly used in an industrial environment.

FILES, ROTARY, INVERTED CONE SHAPE, HIGH SPEED STEEL OR TUNGSTEN CARBIDE

AECMA PREN 4158-2005 航空航天系列.传导层测试电表层阻抗油漆试验方法.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments.

Aerospace series Paints and varnishes Test method for measurements of electrical surface resistance of conductive layers Edition P 1

ARMY A-A-51461 C VALID NOTICE 1-2005 凝固点和亚硝酸盐浓度抗冻测试条和彩色图表的检测试剂盒

A-A-51461C, dated 31 May 2000, has been reviewed and determined to be valid for use in acquisition

TEST KIT, TEST STRIPS AND COLOR CHART, ANTIFREEZE, FREEZE POINT AND NITRITE CONCENTRATION

DLA A-A-1818 A-2005 工业偏硅酸钠

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

SODIUM METASILICATE, TECHNICAL

NAVY QPL-AS8660-2-2005 北约代号S-736硅脂

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject non-Government standard such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest adopted issue of the applicable non-Government standard. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the manufacturer from compliance with the non-Government standard requirements.

SILICONE COMPOUND NATO CODE NUMBER S-736

DLA MS39207 REV F-2005 压缩型安全管套90度弯头

Unless otherwise specified, the tolerance for 3 place decimals is ± .005, the tolerance for fractions is ± 1/64, the tolerance for degrees is ± 2°.

ELBOWS, TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE

DLA MS39210 REV H-2005 压缩式安全联接套管螺母

Unless otherwise specified, the tolerance for 3 place decimals is decimals ± .005, the tolerance for fractions is ± 1/64, the tolerance for degrees is ± 2°.

NUTS, TUBE COUPLING - SAFETY SLEEVE COMPRESSION TYPE

AECMA PREN 4592-2005 航空航天系列.油漆涂料试验方法红外线反射系数.P1版

This standard specifies the method of test for determining the infrared reflectance of paints and varnishes. The test procedure determines the amount of energy reflected by the material in the range of wavelengths between 700 nanometres and 2 400 nanometres with respect to that of a standard reflectance material. The procedure is applicable to products intended for use in aerospace applications.

Aerospace series Paints and varnishes Test method for determination of infrared reflectance Edition P 1

AECMA PREN 4406-2005 航空航天系列.油漆涂料两成分冷聚氨酯敷层抗磨损.P2版

This standard specifies the requirements for a two component polyurethane, abrasion resistant coating available in a range of colours and levels of gloss, to be applied over a primer for aerospace applications offering resistance to wear on sliding surfaces and resistance to impact from solid particles.

Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Coating Abrasion Resistant Edition P 2

DLA A-A-374 C-2005 工业碳酸氢钠

This commercial item description (CID) covers technical grade sodium bicarbonate foruse in soda-acid fire extinguishers, in chemical munitions, and for other purposes where a technical grade of mildly alkaline material is required. It is not intended for medicinal or edible purposes.

SODIUM BICARBONATE, TECHNICAL

NAVY QPL-24635-17-2005 有机硅醇酸树脂共聚物制成的搪瓷

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the contractor from compliance with the specification requirements.

ENAMEL, SILICONE ALKYD COPOLYMER

AECMA PREN 4588-2005 航空航天系列.防滑两成分冷聚亚安酯油漆涂料.P1版

This "Aerospace Series" frestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments.

Aerospace Series Paints and Varnishes Two Component, Cold Curing Polyurethane Paint, Anti Slip Edition P 1

AECMA PREN 2435-05-2005 航空航天系列.油漆和清漆 耐腐蚀,双组分,冷固化底漆.第5部分 运用于军事中的高抗腐蚀性.第1版

This stahdad is part of the seiies of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258.

Aerospace Series Paints and Varnishes Corrosion Resistant Chromated Two Component Cold Curing Epoxy Primer Part 05: High Corrosion Resistance for Military Application Edition P 1

AECMA PREN 2436-06-2005 航空航天系列.油漆和清漆 耐腐蚀加铬酸盐双组分冷固化环氧底漆.第6部分:运用于军事的强耐腐蚀性.第1版

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258.

Aerospace series Paints and varnishes Corrosion resistant chromate-free two component cold curing epoxy primer Part 06: High corrosion resistance for military application Edition P 1

ARMY MIL-E-52891 B NOTICE 1-2005 苯乙烯改性醇酸树脂磷酸锌无光泽搪瓷

MIL-E-52891B is inactive for new design and is no longer used, except for replacement purposes.

ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE

DLA A-A-51176 B-2005 碳化钨或高速锥形旋转锉刀

This commercial item description (CID) covers the requirements for cone shape,high speed steel or tungsten carbide type rotary files.

FILES, ROTARY, CONE SHAPE, HIGH SPEED STEEL OR TUNGSTEN CARBIDE

NAVY QPL-81905-8-2005 CSU-15A/P型抗荷装

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release or otherwise affect the obligation of the manufacturer to comply with the specification requirements.

ANTI-G GARMENT, CSU-15A/P

GSA QPL-AA-C-2786-1-2005 电仪器安全储藏柜

CABINET, SECURITY, ELECTRONIC DEVICE STORAGE

CABINET, SECURITY, ELECTRONIC DEVICE STORAGE

AECMA PREN 4195-2005 航空航天系列.油漆涂料试验方法鉻酸盐过滤.P1版

This standard defines a test procedure for the determination of the leaching rate of hexavalent chromium from the dry paint film of a chromate containing primer for aerospace use.

Aerospace series Paints and varnishes Test method for determination of chromate leaching Edition P 1

DLA A-A-51186 B-2005 碳化钨或高速圆头14度锥形旋转锉刀

This commercial item description (CID) covers the requirements for tapered, cone shape, high speed steel or tungsten carbide type rotary files having an included angle of 14 degrees.

FILES, ROTARY, TAPERED, 14 DEGREE CONE SHAPE, RADIUS NOSE, HIGH SPEED STEEL OR TUNGSTEN CARBIDE