共找到 884 条与 复合材料与固体燃料 相关的标准,共 59 页
This CID covers the general requirements for an inductor. Inductors covered by this CID are intended for commercial/industrial applications.
INDUCTOR, POWER, SHIELDED, SURFACE MOUNT
This commercial item description (CID) covers technical grade anhydrous sodium carbonate for use in various washing, cleaning, and scouring processes, with or without soap, as conditions may require when a moderately strong alkaline material is desired, and for the treatment of water. It is not intended for use in glass making. Anhydrous sodium carbonate is commonly known as soda ash.
SODIUM CARBONATE, ANHYDROUS, TECHNICAL [Superseded: DLA O-S-571 G CANC NOTICE 1, DLA O-S-571 G, DLA O-S-571 F INT AMD 1, DLA O-S-571 F, DLA O-S-571 E INT AMD 2, DLA O-S-571 E (1), DLA O-S-571 E, DLA O-S-571 D, DLA O-S-571 B (1), DLA O-S-571 B]
本部分规定了复合材料预浸料面密度测定的试验仪器和工具、试样.试验步又、试验结果及试验报告 等内容。 本部分适用于复合材料预浸料面密度的测定。
Test method for physical properties of composite material prepreg Part 2:Determination of mass per unit area
Test method for physical properties of composite material prepreg Part 1:General rules
Test method for physical properties of composite material prepreg Part 8:Determination of tack
Test method for physical properties of composite material prepreg Part 7:Determination of gel time
Test method for physical properties of composite material prepreg Part 6:Determination of resin flow
本部分规定了复合材料預浸料樹脂含量测定的溶解法和索氏萃取法。 本部分适用于复合材料预浸料树脂含量的测定。
Test method for physical properties of composite material prepreg Part 5:Determination of resin content
本部分规定了複合材料預浸料揮發份含量测定的儀器和工具 、试样 ,试验步骤试验结果及试验报告 等内容。 本部分适用于复合材料预浸料挥发份含量的测定。
Test method for physical properties of composite material prepreg Part 4:Determination of volatiles content
本部分规定了复合材料预浸料纤维面密度测定的溶解法和索氏萃取法。 本部分适用于复合材料预浸料纤维面密度的测定。
Test method for physical properties of composite material prepreg Part 3:Determination of fiber mass per unit area
A-A-197, dated 23 March 1998, has been reviewed and determined to be valid for use in acquisition
HERBICIDE, 2,4-DICHLOROPHENOXACETIC ACID (SALTS AND ESTERS)
The General Services Administration has authorized the use of this federal specification by all federal agencies.
CARBON DIOXIDE (CO2): TECHNICAL AND USP
A-A-19C, dated 17 October 1997, has been reviewed and determined to be valid for use in acquisition
SCALE REMOVING COMPOUND (POWDER, SULFAMIC ACID)
This commercial item description (CID) covers sorbents of various shapes and sizes used in HM spill response on Navy ships. This material is used to contain and sorb HM spills on Navy ships.
SORBENT, HAZARDOUS MATERIAL (HM)
1.1 This practice covers procedures for obtaining a sample of noncryogenic aerospace propellant. Two procedures are covered as follows: Procedure 1-- Closed System (Section 6), and Procedure 2--Open-End Procedure (Section 7).1.2 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For hazard statements see Sections 4 and 5.
Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
This technical specification defines the requirements for moulded elastomer seal elements for use in hydraulic systems using phosphate ester fluids for aerospace application. It shall be applied in conjunction with relevant material standards unless otherwise specified on the drawing, order, inspection schedule or contractual document
Aerospace series Static seal elements elastomer, moulded, phosphate ester resistant Technical specification Edition P 1
This "Aerospace Series" frestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments.
Aerospace series Ethylene-propylene elastomer (EPM/EPDM) Hardness 80 IRHD for static seal elements in hydraulic systems for long-term application Material standard Edition P 1
1.1 This practice covers procedures for obtaining a sample of noncryogenic aerospace propellant. Two procedures are covered as follows:Procedure 1Closed System (Section 6), andProcedure 2Open-End Procedure (Section 7). 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For hazard statements see Sections 4 and 5.
Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
MS52143 is inactive for new design and is no longer used, except for replacement purposes.
BEARING, ROLLER, NEEDLE: THICK OUTER RING W/ROLLERS, CAGE AND SEALS
A-A-59339, dated 15 September 1998, has been reviewed and determined to be valid for use in acquisition
GUANIDINE NITRATE
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号