共找到 877 条与 服装、服饰品 相关的标准,共 59 页
この規格は,衣料,袋物などに用いられる一般用のスライドファスナ(以下,フアスナという。)について規定する。
Slide fasteners
この規洛は,高齢者の加齢による運動機能の低下などの様々な現象に対して,衣料品の着用性の向上を確保することを目的として,ポタンの設計・製作,衣服製作のときのボタンの選択及び取付けなどにおける記慮すべき事項について規定する。
Guidelines for older persons -- Designing of clothes -- Shape and use of buttons
本标准规定了微型计算机(不包括便携式微型计算机、PC-工作站和PC-服务器)用机箱的术语和定义、要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于微型计算机用机箱(以下简称机箱)的设计和制造。
Chassis for microcomputer
This document covers flame resistant, waterproof, and moisture vapor permeable cloth used in the ruggedized flyers'coveralls.
CLOTH, WATERPROOF, FLAME RESISTANT, MOISTURE VAPOR PERMEABLE
1.1 These test methods cover the determination of the strengths for zipper and zipper parts. All methods are not suitable for use with all kinds of zipper. The restrictions, if any, are indicated in the scope for each individual test method. The test methods appear as follows:1.2 The values stated in SI units are to be regarded as the standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Methods for Strength Tests for Zippers
Many consumers use the capacity measurement as a key specification to determine the backpack size suitable for their requirements.1.1 This test method determines and standardizes an unextended and extended capacity for backpacks and related bags. Related bags include lumbar packs, soft rucksacks, internal and external frame packs, duffel bags, and travel packs.1.2 This test method is designed to provide a means whereby manufacturers and consumers may have a consistent means to compare pack volumes.1.3 This test method does not take into consideration areas of the backpack that are not completely enclosed by fabric such as mesh pockets, water bottle holders, and compressor pockets.1.4 For practical purposes this test method cannot be used to measure capacities less than 4 L.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Measurement of Backpack Capacity
4.1 The usefulness of a zipper in service can be evaluated by these tests. No one test determines the suitability of a zipper for a specific end use. Since the tests are inter-related more than one may be needed for a complete evaluation. 4.2 These methods are considered satisfactory for acceptance testing of commercial shipments because the methods have been used extensively in the trade for this purpose, and because estimates of current between-laboratory precision are acceptable in most cases. 4.2.1 If there are differences of practical significance between reported test results for two laboratories (or more), comparative test should be performed to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, the test samples should be used that are as homogeneous as possible, that are drawn from the material from which the disparate test results were obtained, and that are randomly assigned in equal numbers to each laboratory for testing. Other materials with established test values may be used for this purpose. The test results from the two laboratories should be compared using a statistical test for unpaired data, at a probability level chosen prior to the testing series. If a bias is found, either its cause must be found and corrected, or future test results must be adjusted in consideration of the known bias. 4.3 The method(s) in the standard along with those in Test Methods D2051, D2052, D2053, D2054, D2057, D2058, D2059, D2060, and D2062 are a collection of proven test methods. They can be used as aids in the evaluation of zippers without the need for a thorough knowledge of zippers. The enumerated test methods do not provide for the evaluation of all zipper properties. Besides those properties measured by means of the enumerated test methods there are other properties that may be important for the satisfactory performance of a zipper. Test methods for measuring those properties have not been published either because no practical methods have yet been developed or because a valid evaluation of the information resulting from existing unpublished methods requires an intimate and thorough knowledge of zippers. 1.1 These test methods cover the determination of the strengths for zipper and zipper parts. All methods are not suitable for use with all kinds of zipper. The restrictions, if any, are indicated in the scope for each individual test method. The test methods appear as follows: Sections Holding Strengths of Separable Units 25 – 32 Holding Strength of Slider Lock
Standard Test Methods for Strength Tests for Zippers
Measurement method of human head circumference in clothing and hat size code
本标准规定了毛皮服装的要求、试验方法、检验规则和标志、标签、包装、运输、贮存。 本标准适用于以各种毛皮为主要原料的服装。 本标准亦适用于以毛皮为内胆、以纺织品等材料为面料的服装。
Fur garment
本标准规定了皮革服装的产品分类、要求、试验方法、检验规则和标志、标签、包装、运输、贮存。 本标准适用于以各种皮革为主要面料的服装。毛革服装参照使用本标准。 本标准不适用于各种毛皮服装。
Leather garment
This purchase description covers the requirements for a moisture-wicking T-shirt.
T-SHIRT, MOISTURE-WICKING, ARMY
MIL-DTL-43734E, dated 22 September 2005, contains errors and should not be used. Users should destroy all copies of MIL-DTL-43734E. Users should use MIL-C-43734D until Revision F is finalized and published.
CLOTH, DUCK, TEXTURED NYLON - USERS SHOULD USE MIL-C-43734D UNTIL REVISION F IS FINALIZED AND PUBLISHED
本标准规定了围巾和披肩的要求、试验方法、检验规则、标志、包装、运输及贮存等全部技术要求。 本标准适用于以纺织机织物(不包括丝绸类织物)为主要原料生产的围巾、披肩类产品。
Scarf and shawl
This document covers water repellent and wind resistant cotton oxford cloth.
CLOTH, WIND RESISTANT OXFORD, COTTON, WATER REPELLENT TREATED
This Technical Report describes different methods of integration of touch and close fasteners to the final or finished product, such as: Sewing, mechanical attachment, adhesive pressure sensitive, heat activated, welded attachment, moulding in, straps, non-continous application in various widths, ogether with the appropriate test method.
Testing guidelines for touch and close fasteners
Chinese sea surveillance clothing and leather shoes
China Marine Surveillance Standard Clothing Work Cap
China Marine Surveillance Standard Clothing Winter Clothes
China Marine Surveillance uniforms
Chinese sea surveillance uniform belt
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号