Y91 造纸机械与设备 标准查询与下载

NF Q79-003-4/IN1*NF EN 1010-4/IN1:2010 机械安全性.印刷和纸张加工机的设计和结构用安全性要求.第4部分:装订机、纸张加工机和修整机

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4 : bookbinding, paper converting and finishing machines.

NF Q40-002-4:2010 机械安全性.造纸机和整饰机械设计和制造的安全性要求.第4部分:纸浆机及其填装设备

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4 : pulpers and their loading facilities.

NF Q40-002-4/IN1:2010 机械安全性.造纸和整饰机械的设计和制造安全性要求.第4部分:纸浆及其装载工具

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4 : pulpers and their loading facilities.

NF Q40-002-2/IN1*NF EN 1034-2/IN1:2010 机械的安全性.造纸机和整饰机械设计和制造的安全要求.第2部分:鼓式剥皮机

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2 : barking drums.

QB/T 2556-2008 造纸机械用铸铁烘缸设计规定

本标准规定了造纸机械用铸铁烘缸设计的要求和计算公式。 本标准适用于造纸机、纸板机及浆板机用的外径不大于4600mm,设计压力不大于1.1MPa的烘缸和烘毯缸（以下简称“烘缸”）。

Design standard in cast iron dryers used in paper machinery

QB/T 2981-2008 纸样成型器技术条件

本标准规定了实验室采用的纸样成型器（以下简称“成型器”）的要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于大部分浆种纸样制取的成型器；不适用于某些较长纤维的浆，如未切短的棉浆、亚麻浆或类似原料纸样制取的成型器。

Technical specification for paper sample former

QB 2551-2008 造纸机械用铸铁烘缸技术条件

本标准规定了造纸机械用铸铁烘缸作为压力容器应具备的设计要求、试验方法与检验规则、标志、包装、运输、贮存。 本标准适用于造纸机、纸板机及浆板机用的外径不大于4600mm,设计压力不高于1.1MPa的烘缸和烘毯缸（以下简称“烘缸”）。

Technological condition of cast iron dryers used in paper machinery

QB/T 2551-2008 造纸机械用铸铁烘缸技术条件

Technical specifications of cast iron drying cylinders for papermaking machinery

QB/T 2980-2008 23升打浆机

本标准规定了实验室适用的23升打浆机（以下简称“打浆机”）的要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于质量为400g~600g绝干浆料，介质为清水，浆和水的最大体积为23升的实验室打浆用打浆机。

23L Labortory beater

ASTM E2598-07 铸铁扬基和蒸汽加热纸烘干机的声发射检测用标准实施规程

1.1 This practice provides guidelines for carrying out acoustic emission (AE) examinations of Yankee and Steam Heated Paper Dryers (SHPD) of the type to make tissue, paper, and paperboard products. 1.2 This practice requires pressurization to levels used during normal operation. The pressurization medium may be high temperature steam, air, or gas. The dryer is also subjected to significant stresses during the heating up and cooling down periods of operation. Acoustic Emission data maybe collected during these time periods but this testing is beyond the scope of this document. 1.3 The AE measurements are used to detect, as well as, localize emission sources. Other methods of nondestructive testing (NDT) may be used to further evaluate the significance of acoustic emission sources. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers

QB/T 1700-2006 高压均质泵

本标准规定了高压均质泵的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于食品液料、制药、日化、化工液料（如油脂、橡胶）等均质或高压喷雾用的高压均质泵（以下简称“均质泵”）。

High-pressure homogeneous pumps

QB/T 1699-2006 球形转子泵

本标准规定了球形转子泵的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于输送易燃、易爆、高温、大黏度介质的球形转子泵（以下简称“球形泵”）。

Global rotor pumps

QB/T 1698-2006 纸浆泵 试验方法

本标准规定了纸浆泵的试验方法。 本标准包括了两种测量精度等级：1级适用较高精度的试验；2级适用于较低精度的试验。两种测量精度等级包括了不同的容差系数值、允许波动值和测量误差分析。 本标准适用于各类纸浆泵。

Pulp pumps.Test means

QB/T 1697-2006 纸浆泵

本标准规定了纸浆的分类、要求、试验方法、检验规则和标志、包装、贮存、运输。 本标准适用于输送温度0～100℃浆料介质的纸浆泵（以下简称“浆泵”）。

Pulp pumps

BS EN 1010-2:2006 机械安全性.印刷机和换纸机的设计和建造的安全要求.包括预压机械的印刷机和涂漆机

This document applies to: - Pre-press machinery (machinery and devices for the production of master copies and printing forms): - exposure equipment for the production of films and printing forms; - equipment for developing films and printing forms; - washing machines for printing forms; - machines for bending printing forms; - punching machines for film and printing forms; - cutting machines for film and printing forms; - machines for the production of gravure printing forms; - scanners. - Printing and varnishing machines: - proofing presses; - sheet-fed printing presses and varnishing machines including digital printing presses; - web-fed rotary presses and varnishing machines including digital printing presses; - screen printing presses. - Auxiliary devices: - cylinder and roller washing devices; - continuous flow drying devices; - powder spraying devices; - auxiliary devices on inking and damping units; - automatic plate clamping devices; - washing equipment for printing forms, rollers and scrapers; - pile turners; - measuring and control devices. This document shall be used together with EN 1010-1:2004. Both parts together identify all significant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in prEN 1010-2 take precedence over respective requirements in this standard. This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1: 2004. This document does not apply to high-pressure cleaning devices and screen printing presses for textile substrates. This document is not applicable to printing and varnishing machines including pre-press machinery which are manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery

NF Q40-002-14:2006 机械安全.设计和制造纸张制造机器和装订机器的安全要求.第14部分:卷筒纸纵切机

Safety of machines - Safety requirements for the design and construction of paper making and finishing machines - Part 14 : reel splitter.

NF Q40-002-13:2006 机械安全.造纸机和整饰机械设计和制造的安全要求.第13部分:货物和装置除线用机器

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13 : machines for de-wiring bales and units.

NF Q40-002-5:2006 机械安全.造纸机和整饰机械设计和制造的安全要求.第5部分:整平机

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5 : sheeters.

NF Q40-002-2:2006 机械安全.造纸机和整饰机械设计和制造的安全要求.第2部分:非正常运转的机械

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2 : barking drums.

NF Q40-002-4:2006 机械安全.造纸机和整饰机械设计和制造的安全要求.第4部分:纸浆机及其设备

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4 : pulpers and their loading facilities.