Y91 造纸机械与设备 标准查询与下载

NF Q40-002-4:2006 机械安全.造纸机和整饰机械设计和制造的安全要求.第4部分:纸浆机及其设备

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4 : pulpers and their loading facilities.

DIN EN 1034-6:2006 机械安全.纸张制造和整饰机械设计和建造的安全要求.第6部分:砑光机.德文版本 EN 1034-6-2005

This European Standard applies to calenders intended for use in paper making and finishing and shall be used together with EN 1034-1:2000. It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5. It does not cover hazards connected with lifting operations required for changing rolls, inserting reels into the unwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls.. This European Standard is not applicable to calenders that have been manufactured before the date of publication of this standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender; German version EN 1034-6:2005

DIN EN 1034-5:2006 机械安全.纸张制造和整饰机械设计和建造的安全要求.第5部分:制纸张的机器.德文版本 EN 1034-5-2005

This European Standard applies to sheeters including unwinders, equipment for sheet piling, drive and control for use in paper converting and shall be used in connection with EN 1034-1:2000. This European Standard is not applicable to equipment for paper dust and waste edge cutting extraction. It deals with all significant hazards, hazardous situations and hazardous events relevant to sheeters when they are used as intended and under conditions which are reasonably foreseeable by the manufacturer.#,,#

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters; German version EN 1034-5:2005

DIN EN 1034-2:2006 机械安全.纸张制造和整饰机械设计和建造的安全要求.第2部分:鼓式剥皮机.德文版本 EN 1034-2-2005

This European Standard applies to barking drums consisting of drum, drive, power transmission elements, supporting wheels and control intended for use in barking plants for paper making and shall be used in connection with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazardous events relevant to barking drums when they are used as intended and under conditions which are reasonably foreseeable by the manufacturer. This standard is not applicable to the saws and conveyers for wood and bark used in barking plants.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums; German version EN 1034-2:2005

DIN EN 1034-13:2006 机械安全.纸制造和整饰机械的设计和结构的安全要求.第13部分:货物和装置除线用机器.德文版本EN 1034-13-2005

This European Standard applies to machines for de-wiring bales and units and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for de-wiring bales and units, when used as intended and under conditions reasonably foreseeable by the manufacturer as incorrect application (see clause 4). This European Standard is not applicable to hand-held devices. This European Standard is not applicable to machines for de~wiring bales and units which are manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units; German version EN 1034-13:2005

BS EN 1034-6:2005 机械安全.造纸和整饰机械的设计和结构用安全要求.第6部分:砑光机

This European Standard applies to calenders intended for use in paper making and finishing and shall be used together with EN 1034-1:2000. It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5. It does not cover hazards connected with lifting operations required for changing rolls, inserting reels into the unwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls.. This European Standard is not applicable to calenders that have been manufactured before the date of publication of this standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender

BS EN 1034-6:2005+A1:2009 机械安全性.造纸和整饰机械的设计和结构用安全性要求.砑光机

This European Standard applies to calenders intended for use in paper making and finishing and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5. It does not cover hazards connected with lifting operations required for changing rolls, inserting reels into the unwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls.. This European Standard is not applicable to calenders that have been manufactured before the date of publication of this standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Calender

DIN EN 1034-14:2006 机械安全.纸张制造和整饰机械设计和建造的安全要求.第14部分:卷纸切纸机.德文版本 EN 1034-14-2005

This European Standard applies to machines for reel splitter in addition with EN 1034-1:2000.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter; German version EN 1034-14:2005

DIN EN 1034-4:2006 机械安全.纸张制造和整饰机械设计和建造的安全要求.第4部分:碎浆机和装载工具.德文版本 EN 1034-4-2005

This European Standard applies to pulpers and their loading facilities intended for use in paper making and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to pulpers and their loading facilities, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard is not applicable to pulpers and their loading facilities that have been manufactured before the date of publication of this standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities; German version EN 1034-4:2005

BS EN 1034-5:2005+A1:2009 机械安全性.造纸机和精整机的设计和结构安全性要求.切纸机

This European Standard applies to sheeters, including unwinding units, sheet stacker, drive and control units intended for use in paper making and shall be used together with !EN 1034-1:2000+A1:2010". Paper dust and edge strip suction devices are not covered by this standard. It deals with all significant hazards, hazardous situations and hazard events relevant to sheeters, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to: ? sheeters for corrugated board (see EN 1010-5); ? sheeters for foil (see EN 1010-1); ? sheeters with sheet feeders (see EN 1010-1); ? guillotines (see EN 1010-3:2002). This document is not applicable to sheeters that have been manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Sheeters

BS EN 1034-2:2005+A1:2009 机械安全性.造纸机和修整机的设计和建造的安全性要求.鼓式剥皮机

This European Standard applies to barking drums consisting of drum, drive, power transmission elements, supporting wheels and control systems intended for use in debarking plants for paper making and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazard events relevant to barking drums, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to sawing equipment or log and bark conveying systems used in debarking plants. This European Standard is not applicable to barking drums that have been manufactured before the date of publication of this European Standard by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Barking drums

BS EN 1034-2:2005 机械安全.造纸机和修整机的设计和建造的安全要求.第2部分:鼓式剥皮机

This European Standard applies to barking drums consisting of drum, drive, power transmission elements, supporting wheels and control systems intended for use in debarking plants for paper making and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to barking drums, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to sawing equipment or log and bark conveying systems used in debarking plants. This European Standard is not applicable to barking drums that have been manufactured before the date of publication of this European Standard by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums

BS EN 1034-5:2005 机械的安全性.造纸机和精整机的设计和结构安全性要求.切纸机

This European Standard applies to sheeters, including unwinding units, sheet stacker, drive and control units intended for use in paper making and shall be used together with EN 1034-1:2000. Paper dust and edge strip suction devices are not covered by this standard. It deals with all significant hazards, hazardous situations and hazard events relevant to sheeters, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to: ? sheeters for corrugated board (see EN 1010-5); ? sheeters for foil (see EN 1010-1); ? sheeters with sheet feeders (see EN 1010-1); ? guillotines (see EN 1010-3:2002). This document is not applicable to sheeters that have been manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters

BS EN 1034-13:2005+A1:2009 机械安全性.造纸和整饰机械的设计和建造用安全性要求.货物和装置除线用机器

This European Standard applies to machines for de-wiring bales and units and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazard events relevant to machines for de-wiring bales and units, when used as intended and under conditions reasonably foreseeable by the manufacturer as incorrect application (see clause 4). This European Standard is not applicable to hand-held devices. This European Standard is not applicable to machines for de-wiring bales and units which are manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Machines for de-wiring bales and units

BS EN 1034-13:2005 机械安全.造纸和整饰机械的设计和建造用安全要求.第13部分:货物和装置除线用机器

This European Standard applies to machines for de-wiring bales and units and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for de-wiring bales and units, when used as intended and under conditions reasonably foreseeable by the manufacturer as incorrect application (see clause 4). This European Standard is not applicable to hand-held devices. This European Standard is not applicable to machines for de-wiring bales and units which are manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units

ASTM D7243-06 测量造纸工业泥浆饱和液压传导性的标准指南

1.1 Paper industry sludges are industrial by-products derived from wastewater treatment operations at plants associated with the manufacturing of paper. These sludges typically consist of clay and organic matter. They may also contain low levels of inorganic and organic contaminants and can be rich in microbes. Traditionally, paper industry sludges have been disposed in municipal solid waste landfills or solid waste monofills. However, in the interest of sustainability, applications are being developed where sludges can be used beneficially. One application is using sludge to construct hydraulic barriers (for example, for use in a landfill cap). Such applications generally require that the hydraulic conductivity of the sludge be measured.1.2 Compacted paper industry sludges generally behave like soils and are amenable to geotechnical testing methods. However, several of their attributes require special attention during testing. Compacted industry sludges generally are highly compressible due to their organic component. Thus, their hydraulic conductivity can be more sensitive to the effective stress and hydraulic gradient applied during testing than most soils. The microbes in paper sludge can also produce gas during testing, confounding testing methods.1.3 This guide is intended to supplement ASTM D 5084, Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter. The purpose of the guide is to provide additional guidance on issues relevant to testing sludges using Test Methods D 5084. The guide applies to specimens compacted in the laboratory using procedures such as those described in Test Methods D 698 and D 1557 or undisturbed specimens collected from the field using procedures such as Practice D 1587 or Practice D 7015.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. This standard contains a hazards section regarding the use of biocides (Section ).1.4 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a projects many unique aspects. The word "Standard" in the title of this document means only that the document has been approved through the ASTM consensus process.

Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

ASTM D7243-06a 测量造纸工业泥浆饱和液压传导性的标准指南

This guide is intended to supplement the methods and procedures described in Test Methods D 5084. When following the recommendations in this guide to test paper sludges, all assumptions and limitations described in Test Methods D 5084 apply. This guide only applies to hydraulic conductivity tests on paper industry sludges where one-dimensional laminar flow of water is imposed using a flexible-wall permeameter. The hydraulic conductivity of sludges, and other porous materials, generally decreases as the degree of water saturation decreases. This guide applies only to water-saturated sludge containing negligible amounts of gas. This guide applies only to permeation of paper industry sludges with water. Information on testing porous materials with liquids other than water can be found in Test Method D 7100. The hydraulic conductivity of paper sludge measured in the laboratory following Test Methods D 5084 and the recommendations in this guide may or may not be comparable to the hydraulic conductivity of in-place sludge. The issue has not been fully investigated. Therefore, the results should be applied to field situations with caution and by qualified personnel. Note 18212;The quality of the result produced when using the recommendations in this guide depends on the competence of the personnel performing the testing and the suitability of the equipment and facilities that are employed. Agencies that meet the criteria of Practice D 3740 are generally considered capable of competent and objective testing, sampling, inspection, etc. Users of this guide are cautioned that compliance with Practice D 3740 does not in itself ensure reliable results. Reliable results depend on many factors; Practice D 3740 provides a means of evaluating some of those factors.1.1 Paper industry sludges are industrial by-products derived from wastewater treatment operations at plants associated with the manufacturing of paper. These sludges typically consist of clay and organic matter. They may also contain low levels of inorganic and organic contaminants and can be rich in microbes. Traditionally, paper industry sludges have been disposed in municipal solid waste landfills or solid waste monofills. However, in the interest of sustainability, applications are being developed where sludges can be used beneficially. One application is using sludge to construct hydraulic barriers (for example, for use in a landfill cap). Such applications generally require that the hydraulic conductivity of the sludge be measured.1.2 Compacted paper industry sludges generally behave like soils and are amenable to geotechnical testing methods. However, several of their attributes require special attention during testing. Compacted industry sludges generally are highly compressible due to their organic component. Thus, their hydraulic conductivity can be more sensitive to the effective stress and hydraulic gradient applied during testing than most soils. The microbes in paper sludge can also produce gas during testing, confounding testing methods.1.3 This guide is intended to supplement ASTM D 5084, Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter. The purpose of the guide is to provide additional guidance on issues relevant to testing sludges using Test Methods D 5084. The guide applies to specimens compacted in the laboratory using procedures such as those described in Test Methods D 698 and D 1557 or undisturbed specimens collected from the field using procedures such as Practice D 1587 or Practice D 7015.1.4 This standard does not purport to address all of the safety concern......

Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

BS EN 1034-14:2005 机械安全.造纸机械和精整机设计和结构的安全要求.卷纸切纸机

This European Standard applies to reel splitters intended for use in paper making and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazardous events relevant to reel splitters when used as intended and under the conditions reasonably foreseen by the manufacturer as incorrect application (see clause 4). This European Standard applies only to reel splitters with a movable knife and of the following designs: - machines with a vertically moving knife pressed downwards from the top onto the reel, generally right to the core so that the layers of wound paper are separated one after the other and fall off; - machines with a driven and movable circular knife that cuts the wound layers of the horizontal reel successively, beginning from the top down to the core, with the cut layers of wound paper falling off one after the other. This European Standard also applies to the integrated conveyor belts and the integrated pivoting platform. This European Standard also covers the guard rails at the interface of the reel splitter and a pulper that is charged with an integrated conveyor belt of the reel splitter. NOTE Pulpers are dealt with in EN 1034-4. This European Standard is not applicable to reel splitters which are manufactured before the date of publication of this EN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Reel splitter

BS EN 1034-14:2005+A1:2009 机械安全性.造纸和研磨机设计和建造的安全性要求.卷纸切纸机

This European Standard applies to reel splitters intended for use in paper making and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazardous events relevant to reel splitters when used as intended and under the conditions reasonably foreseen by the manufacturer as incorrect application (see clause 4). This European Standard applies only to reel splitters with a movable knife and of the following designs: ? machines with a vertically moving knife pressed downwards from the top onto the reel, generally right to the core so that the layers of wound paper are separated one after the other and fall off; ? machines with a driven and movable circular knife that cuts the wound layers of the horizontal reel successively, beginning from the top down to the core, with the cut layers of wound paper falling off one after the other. This European Standard also applies to the integrated conveyor belts and the integrated pivoting platform. This European Standard also covers the guard rails at the interface of the reel splitter and a pulper that is charged with an integrated conveyor belt of the reel splitter. NOTE Pulpers are dealt with in EN 1034-4. This European Standard is not applicable to reel splitters which are manufactured before the date of publication of this EN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Reel splitter

BS EN 1034-4:2005 机械安全.造纸机械和精整机设计和结构的安全要求.碎浆机和装载工具

This European Standard applies to pulpers and their loading facilities intended for use in paper making and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to pulpers and their loading facilities, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard is not applicable to pulpers and their loading facilities that have been manufactured before the date of publication of this standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Pulpers and their loading facilities