ZH
RU
ES

surface contact disc

surface contact disc, Total:498 items.

In the international standard classification, surface contact disc involves: Linear and angular measurements, Adhesives, Electrical engineering in general, Paper and board, Ergonomics, Heat treatment, Tobacco, tobacco products and related equipment, Textile fibres, Materials and articles in contact with foodstuffs, Kitchen equipment, Safety of machinery, Air quality, Lifting equipment, Machine tool systems, Thermodynamics and temperature measurements, Medical equipment, Corrosion of metals, Petroleum products in general, Paints and varnishes, Domestic, commercial and industrial heating appliances, Lubrication systems, Vocabularies, Mechanical testing, Gears, Geology. Meteorology. Hydrology, Measurement of time, velocity, acceleration, angular velocity, Protective equipment, Rubber, Microbiology, Aerospace electric equipment and systems, Metrology and measurement in general, Sterilization and disinfection, Aids for disabled or handicapped persons, Road engineering, Fluid storage devices, Electromechanical components for electronic and telecommunications equipment, Products of the textile industry, Electrical accessories, Bearings, Surface treatment and coating, Sports equipment and facilities, Equipment for the metallurgical industry, Glass, Products of the chemical industry, Food products in general, Soil quality. Pedology, Hydraulic fluids, Occupational safety. Industrial hygiene, Agricultural machines, implements and equipment, Welding, brazing and soldering, Electronic components in general, Protection against fire, Rubber and plastics products, Components and accessories for telecommunications equipment, Electronic display devices, Packaging materials and accessories, Pharmaceutics, Cutting tools, Electricity. Magnetism. Electrical and magnetic measurements, Technical drawings, Protection against crime, Ceramics.

Professional Standard - Machinery, surface contact disc

JB/T 11271-2012 Contact(stylus)surface contour tester
JB/T 5221-2014 Digital hand-held contact tachometer
JB/T 5221-1991 Contact handy digital tachometer

AT-ON, surface contact disc

ONORM M 1114-1982 Measurement of surface roughness with contact (Stylus) Instruments

NL-NEN, surface contact disc

NEN 2716-1992 Heating in contact with the front of the domestic cooking appliances burning gas

Korean Agency for Technology and Standards (KATS), surface contact disc

KS M 4058-2021 Determination of stylus contact method of paper and board — Surface roughness
KS M 4057-2021 Determination of stylus contact method of paper and board — Surface friction
KS A ISO TS 13732-2:2021 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces —Part 2: Human contact with surfaces at moderate temperature
KS B ISO 12164-2:2005 Hollow taper interface with flange contact surface-Part 2:Receivers-Dimensions
KS B ISO 12164-1:2005 Hollow taper interface with flange contact surface-Part 1:Shanks-Dimensions
KS B ISO 12164-1:2013 Hollow taper interface with flange contact surface－Part 1：Shanks－Dimensions
KS B ISO 12164-2:2013 Hollow taper interface with flange contact surface－Part 2：Receivers－Dimensions
KS A ISO 13732-1:2021 Ergonomics of the thermal environment —Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
KS A ISO 13732-3:2021 Ergonomics of the thermal environment —Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces
KS B ISO 12179:2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method-Calibration of contact(stylus) instruments
KS B ISO 12179:2014 Geometrical Product Specifications(GPS) — Surface texture: Profile method — Calibration of contact(stylus) instruments
KS A ISO 3274:2019 Geometrical product specifications(GPS)－Surface texture：Profile method－Nominal characteristics of contact(stylus) instruments
KS B 0501-2021 Instruments for the measurement of surface roughness by the stylus method
KS B 0501-2016 Instruments for the measurement of surfaceroughness by the stylus method－Profile method
KS B ISO 12179-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method — Calibration of contact(stylus) instruments
KS M ISO 20823-2004(2019) Petroleum and related products－Determination of the flammability characteristics of fluids in contact with hot surfaces－Manifold ignition test
KS M ISO 20823:2004 Petroleum and related products－Determination of the flammability characteristics of fluids in contact with hot surfaces－Manifold ignition test
KS A ISO 3274:2002 Geometrical product specifications(GPS)-Surface texture:Profile method-Nominal characteristics of contact(stylus) instruments
KS A ISO 3274:2014 Geometrical product specifications(GPS)－Surface texture：Profile method－Nominal characteristics of contact(stylus) instruments
KS B ISO 12164-2-2005(2010) Hollow taper interface with flange contact surface－Part 2：Receivers－Dimensions
KS B 0617-1999(2009) Technical drawings－Method of indicating surface texture on drawings

CZ-CSN, surface contact disc

CSN 91 0278-1987 Furniture. Methods of determining the surfaee contact heat resistanee
CSN ISO 3274:1994 Instruments for the measurement of surface roughness by the profile method.Contact(stylus)instruments of consecutive profile transformation.Contact profile meters,system M
CSN ISO 1880:1993 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of progressive profile transformation. Profile recording instruments
CSN 63 1554-1983 Tyre testing. Retermination of t.yre / ground contact pressure
CSN 01 4949-1976 Straight ? face splined joints. Tolerances

IT-UNI, surface contact disc

GOSTR, surface contact disc

GOST R ISO/TU 13732-2-2008 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Part 2. Contact with moderate temperature surface

British Standards Institution (BSI), surface contact disc

BS EN 828:2013 Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface
PD ISO/TS 13732-2:2001 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Human contact with surfaces at moderate temperature
BS EN 828:1998 Adhesives. Wettability. Determination by measurement of contact angle and critical surface tension of solid surface
BS EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Nominal characteristics of contact (stylus) instruments
BS EN ISO 13732-1:2006 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Hot surfaces
BS EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Cold surfaces
BS EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
BS EN ISO 19403-2:2020 Paints and varnishes. Wettability - Determination of the surface free energy of solid surfaces by measuring the contact angle
BS EN ISO 12179:2022 Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
BS ISO 26623-2:2008 Polygonal taper interface with flange contact surface - Dimensions and designation of receivers
BS ISO 26623-2:2014 Polygonal taper interface with flange contact surface. Dimensions and designation of receivers
21/30434709 DC BS ISO 24118-1. Paper and board. Stylus contact method - Part 1. Determination of surface roughness
22/30458026 DC BS ISO 24118-1. Paper and board. Stylus contact method. Part 1. Determination of surface roughness
BS EN ISO 12179:2001 Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
BS EN ISO 25178-606:2015 Geometrical product specification (GPS). Surface texture: Areal. Nominal characteristics of non-contact (focus variation) instruments
20/30397768 DC BS EN ISO 12179. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
BS EN 4875:2020 Aerospace series. Surface treatments. Test method for measurement of electrical contact resistance
BS ISO 12164-2:2001 Hollow taper interface with flange contact surface. Receivers. Dimensions
BS EN 3155-002:2006 Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts
BS 7997:2003 Products for tactile paving surface indicators - Specification
BS ISO 12164-2:2002 Hollow taper interface with flange contact surface - Receivers - Dimensions
BS EN ISO 3274:1998 Geometric product specifications (GPS) - Surface texture - Profile method - Nominal characteristics of contact (stylus) instruments
BS EN ISO 3274:1997 Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments
BS 7557:1992 Specification for limits of metal release from painted surfaces of articles, liable to come into contact with foodstuffs
BS EN ISO 25178-607:2019 Geometrical product specifications (GPS). Surface texture: Areal - Nominal characteristics of non-contact (confocal microscopy) instruments
BS ISO 12164-1:2001 Hollow taper interface with flange contact surface. Shanks. Dimensions
BS ISO 3274:1997 Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments
18/30379216 DC BS EN 4875. Aerospace series. Surface treatments. Test method for measurement of electrical contact resistance
BS EN 16299:2013 Cathodic protection of external surfaces of above ground storage tankbases in contact with soil or foundations
BS EN 1388-2:1996 Materials and articles in contact with foodstuffs - Silicate surfaces - Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
BS EN 13202:2000 Ergonomics of the Thermal Environment - Temperatures of Touchable Hot Surfaces - Guidance for Establishing Surface Temperature Limit Values in Product Standards with the Aid of EN 563
BS EN ISO 25178-604:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (coherence scanning interferometry) instruments
BS ISO 12164-1:2002 Hollow taper interface with flange contact surface - Shanks - Dimensions
BS EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Calibration and measurement standards for contact (stylus) instruments
BS EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Nominal characteristics of non-contact (confocal chromatic probe) instruments
BS ISO 15800:2019 Soil quality. Characterization of soil with respect to human exposure
BS EN ISO 25178-603:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
BS EN ISO 25178-605:2014 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (point autofocus probe) instruments
BS EN 14700:2014 Welding consumables. Welding consumables for hard-facing
BS EN ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
BS EN 12228:2003 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
BS EN 12228:2002 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
BS EN 12228:2013 Surfaces for sports areas. Determination of joint strength of synthetic surfaces
BS 9522 N0001:1982 Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling with front release, rear removable crimp contacts - Full assessment level
BS DD CEN/TS 15209:2008 Tactile paving surface indicators produced from concrete, clay and stone
BS 9526 N0001:1978 Detail specification for multi-contact edge socket electrical connectors - Single or double sided, closed ended, replaceable contacts, through-board solder or wire wrap terminations - Full assessment level
BS 9526 N0003:1979 Detail specification for multi-contact edge socket electrical connectors - Single or double sided, open ended, guide key location, replaceable contacts, through-board solder or wire wrap terminations - Full assessment level
BS ISO 11658:2012 Cardiovascular implants and extracorporeal systems. Blood/tissue contact surface modifications for extracorporeal perfusion systems
BS EN ISO 19403-5:2020 Paints and varnishes. Wettability - Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy

RO-ASRO, surface contact disc

STAS SR ISO 3274:1995 Instruments for the measurements of surface roughness by the profile method - Contact (stylus) instruments of consecutive profile transformation - Contact profile meters, system M
STAS 8473-1988 Petroleum equipment JUMPERS OF HOISTING EQUIPMENT Radii of contact surfaces
STAS 12561-1987 Geological investigation equipment JUMPERS FOR HOISTING EQUIPMENT Radii of contact'surfaces
STAS 5730/4-1987 Surfaces condition RULES FOR THE MEASURE- MENT OF SURFACE ROUGHNESS USING STYLUS INSTRUMENTS
STAS 7903-1992 Hexagon nuts with, spherical contact face. Product grade A

Danish Standards Foundation, surface contact disc

DS/EN ISO 12179/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
DS/EN ISO 12179:2000 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
DS/ISO/TS 13732-2:2011 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 2: Human contact with surfaces at moderate temperature
DS/EN ISO 3274/Corr. 1:2007 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
DS/EN ISO 3274:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
DS/EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces
DS/EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces
DS/EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
DS/EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
DS/EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
DS/EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments
DS/EN 12228:2013 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
DS/CLC Guide 29:2007 Temperatures of hot surfaces likely to be touched - Guidance document for Technical Committees and manufacturers
DS/EN 1388-2:1996 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
DS/EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
DS/EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
DS/ISO 4288:1986 Rules and procedures for the measurement of surface roughness parametres using stylus instruments
DS/EN ISO 20823:2004 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test

Association Francaise de Normalisation, surface contact disc

NF E05-056*NF EN ISO 12179:2022 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
NF EN 828:2013 Adhésifs - Mouillabilité - Détermination par mesurage de l'angle de contact et de l'énergie superficielle libre de la surface solide
NF T76-150*NF EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
NF E05-056:2000 Geometrical Product Specifications (GPS) - Surface texture : profil method - Calibration of contact (stylus) instruments.
NF A05-600*NF EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
NF X35-112-3*NF EN ISO 13732-3:2008 Ergonomic of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3 : cold surfaces.
NF EN ISO 25178-601:2010 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 601 : caractéristiques nominales des instruments à contact (à palpeur)
NF EN ISO 13732-1:2008 Ergonomie des ambiances thermiques - Méthodes d'évaluation de la réponse humaine au contact avec des surfaces - Partie 1 : surfaces chaudes
NF EN ISO 13732-3:2008 Ergonomie des ambiances thermiques - Méthodes d'évaluation de la réponse humaine au contact avec des surfaces - Partie 3 : surfaces froides
NF X35-112-1*NF EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1 : hot surfaces.
NF X35-112-1:2006 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1 : hot surfaces.
NF T30-131-2*NF EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2 : determination of the surface free energy of solid surfaces by measuring the contact angle
NF EN ISO 19403-2:2020 Peintures et vernis - Mouillabilité - Partie 2 : détermination de l'énergie libre de surface des surfaces solides par la mesure de l'angle de contact
NF EN ISO 25178-701:2010 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 701 : étalonnage et étalons de mesure pour les instruments à contact (à palpeur)
NF L10-314*NF EN 4875:2020 Aerospace series - Surface treatments - Test method for measurement of electrical contact resistance
NF EN 4875:2020 Série aérospatiale - Traitements de surface - Méthode d'essai de mesure de la résistance électrique de contact
NF EN ISO 25178-606:2015 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 606 : caractéristiques nominales des instruments sans contact (à variation focale)
NF EN ISO 25178-607:2019 Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 607 : caractéristiques nominales des instruments sans contact (microscopie confocale)
NF E62-509-2:2009 Polygonal taper interface with flange contact surface - Part 2 : dimensions and designation of receivers.
NF E62-509-2*NF ISO 26623-2:2014 Polygonal taper interface with flange contact surface - Part 2 : dimensions and designation of receivers
NF D25-501-2*NF EN 1388-2:1996 Materials and articles in contact with foodstuffs. Silicate surfaces. Part 2 : determination of the release of lead and cadmium from silicate surface other than ceramic ware.
NF EN ISO 18593:2018 Microbiologie des aliments - Méthodes horizontales pour les techniques de prélèvement sur des surfaces, au moyen de boîtes de contact et d'écouvillons
NF EN ISO 12179:2022 Spécification géométrique des produits (GPS) - États de surface : méthode du profil - Étalonnage des instruments à contact (palpeur)
NF EN ISO 25178-603:2013 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 603 : caractéristiques nominales des instruments sans contact (microscopes interférométriques à glissement de franges)
NF EN ISO 25178-602:2010 Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 602 : caractéristiques nominales des instruments sans contact (à capteur confocal chromatique)
NF E05-031-606*NF EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture : areal - Part 606 : nominal characteristics of non-contact (focus variation) instruments
NF T72-110:2019 Methods of disinfection surfaces by steam with or without contact - Determination of bactericidal, fungicidal, yeasticidal, sporicidal and virucidal activity including bacteriophages
NF EN ISO 25178-604:2013 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 604 : caractéristiques nominales des instruments sans contact (à interférométrie par balayage à cohérence)
NF A04-195:1997 Founding. Surface roughness inspection by visualtactile comparators.
NF L54-002-212*NF EN 2591-212:2006 Aerospace series - Elements of electrical and optical connection - Test methods - Part 212 : surface transfer impedance
NF E62-507-2*NF ISO 12164-2:2002 Hollows taper interface with flange contact surface - Part 2 : receivers - Dimensions
NF EN 1388-2:1996 Matériaux et articles en contact avec les denrées alimentaires - Surfaces silicatées - Partie 2 : détermination de l'émission de plomb et de cadmium par les surfaces silicatées autres que les articles en céramique.
NF E62-514-5*NF ISO 10649-5:2012 Cutter arbors with parallel key and tenon drive - Part 5 : dimensions and designation of tool holders with polygonal interface with flange contact surface
NF V08-035*NF EN ISO 18593:2018 Microbiology of the food chain - Horizontal methods for sampling techniques from surfaces using contact plates and swabs
NF EN ISO 3274:1998 Spécification géométrique des produits (GPS) - État de surface : méthode du profil - Caractéristiques nominales des appareils à contact (palpeur)
NF E05-031-605*NF EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture : areal - Part 605 : nominal characteristics of non-contact (point autofocus probe) instruments
NF EN 14930/IN1:2009 Matériels agricoles et forestiers et matériels de jardinage - Machines portables à la main et à conducteur à pied - Détermination du risque de contact avec les surfaces chaudes
NF EN 14930+A1:2009 Matériels agricoles et forestiers et matériels de jardinage - Machines portables à la main et à conducteur à pied - Détermination du risque de contact avec les surfaces chaudes
NF E05-031-604*NF EN ISO 25178-604:2013 Geometrical product specification (GPS) - Surface texture : areal - Part 604 : nominal characteristics of non-contact (coherence scanning interferometry) instruments
NF P90-122*NF EN 12228:2013 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
NF E62-507-1*NF ISO 12164-1:2002 Hollow taper interface with flange contact surface - Part 1 : shanks - Dimensions
NF T60-138*NF EN ISO 20823:2004 Petroleum and related products - Determination of flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
NF EN ISO 25178-605:2014 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 605 : caractéristiques nominales des instruments sans contact (capteur autofocus à point)
NF D32-320:1991 HEATING IN CONTACT WITH THE FRONT OF THE DOMESTIC COOKING APPLIANCES BURNING GAS.
NF X35-111:1994 Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperatur limit values for hot surfaces.
NF EN ISO 20823:2004 Pétrole et produits connexes - Détermination des caractéristiques d'inflammabilité de fluides au contact de surfaces chaudes - Essai d'inflammation sur métal chaud

ES-AENOR, surface contact disc

UNE 82-304-1991
UNE 82-314-1991 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of consecutive profile transformation. Contact profile meters, system M

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, surface contact disc

GB/T 34662-2017 Electrotechnical equipment—Temperatures of touchable hot surfaces
GB/T 33523.601-2017 Geometrical product specifications (GPS)—Surface texture: Areal—Part 601: Nominal characteristics of contact (stylus) instruments
GB/T 36004-2018 Food contact surfaces cleaning and disinfection efficacy test method—ATP bioluminescence method
GB/T 33523.701-2017 Geometrical product specifications (GPS)—Surface texture: Areal— Part 701: Calibration and measurement standards for contact (stylus) instruments

American Society for Testing and Materials (ASTM), surface contact disc

ASTM D724-99 Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method)
ASTM D724-99(2003) Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method)
ASTM C1055-03 Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
ASTM C1055-99 Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
ASTM G204-21 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
ASTM C1055-20 Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries
ASTM C1055-03(2014) Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries
ASTM C1055-03(2009) Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
ASTM F1060-05 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact
ASTM D925-06 Standard Test Methods for Rubber Property-Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM D925-06e1 Standard Test Methods for Rubber Property-Staining of Surfaces (Contact, migration, and Diffusion)
ASTM G204-15 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
ASTM D925-14 Standard Test Methods for Rubber Propertymdash;Staining of Surfaces 40;Contact, Migration, and Diffusion41;
ASTM D7113-05 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
ASTM D7113-09 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
ASTM D925-88(2000) Standard Test Methods for Rubber Property-Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM F1060-01 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact
ASTM D925-14(2019) Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM D925-06e2 Standard Test Methods for Rubber Propertyx2014;Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM F1060-87(1993)e1 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact
ASTM F1060-16 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR)
ASTM F1060-08 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact
ASTM C813-90(1999) Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
ASTM C813-90(2004) Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
ASTM C813-90(2009) Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
ASTM C1057-03 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
ASTM C1057-03(2010) Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
ASTM C1057-92(1998)e1 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
ASTM D7334-08(2013) Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
ASTM C1057-17 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
ASTM C1057-22 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
ASTM E1153-14 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces
ASTM D7490-13 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM D7490-08 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM G204-10 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
ASTM D7334-08 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
ASTM D7113/D7113M-10 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
ASTM D7490-13(2022) Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM C813-90(2014) Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
ASTM D7113/D7113M-10(2016) Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
ASTM D7334-08(2022) Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
ASTM E1153-14e1 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces

ECIA - Electronic Components Industry Association, surface contact disc

EIA/IS-47-1987 Contact Termination Finish Standard for Surface Mount Devices
EIA-364-60A-2008 TP-60A General Methods for Testing of Contact Finishes for Electrical Connectors and Sockets
EIA/ECA-364-60A-2008 TP-60A GENERAL METHODS FOR TESTING OF CONTACT FINISHES FOR ELECTRICAL CONNECTORS AND SOCKETS
EIA-448-20-1989 Method 20 Test Method for Electromechanical Components Test Method for Lens Face Touch Temperature
498BAAA-1988 Detail Specification for Capability Approval of Metal Dome Contact Touch Stroke Switch Panels

International Organization for Standardization (ISO), surface contact disc

ISO/TS 13732-2:2001 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 2: Human contact with surfaces at moderate temperature
ISO/FDIS 24118-1:1964 Paper and board — Stylus contact method — Part 1: Determination of surface roughness
ISO 24118-1:2023 Paper and board — Stylus contact method — Part 1: Determination of surface roughness
ISO/DIS 25178-601:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Design and characteristics of contact (stylus) instruments
ISO 9341:1996 Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses
ISO 12179:2021 Geometrical product specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments
ISO 12164-1:2001 Hollow taper interface with flange contact surface - Part 1: Shanks; Dimensions
ISO 12164-2:2001 Hollow taper interface with flange contact surface - Part 2: Receivers; Dimensions
ISO 13732-3:2005 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces
ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
ISO/CD 25178-601 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments
ISO 13732-1:2006 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces
ISO 19403-2:2017 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO/CD 19403-2:2023 Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO/DIS 19403-2:2023 Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
ISO 3274:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
ISO 26623-2:2008 Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers
ISO 26623-2:2014 Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers
ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments
ISO 12179:2000/cor 1:2003 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments; Technical Corrigendum 1
ISO 3274:1996/cor 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments; Technical Corrigendum 1
ISO 10649-5:2012 Cutter arbors with parallel key and tenon drive - Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments
ISO/CD 25178-602 Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
ISO 25178-607:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments
ISO 4288:1985 Rules and procedures for the measurement of surface roughness using stylus instruments
ISO/CD 25178-603 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
ISO/CD 25178-604 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
ISO/CD 25178-605 Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO/DIS 25178-603:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments
ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
ISO/FDIS 12164-5 Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES
ISO/FDIS 12164-3 Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U
ISO/DIS 5686-1 Tapered polygonal interface with flat contact surface — Part 1: Shanks of type F, H, A
ISO/DIS 25178-602:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments
ISO/DIS 25178-605:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Design and characteristics of non-contact (point autofocus probe) instruments
ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
ISO/TR 10064-4:1998/cor 1:2006 Cylindrical gears - Code of inspection practice - Part 4: Recommendations relative to surface texture and tooth contact pattern checking; Technical Corrigendum 1
ISO/FDIS 12164-1 Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB
ISO/TR 10064-4:1998 Cylindrical gears - Code of inspection practice - Part 4: Recommendations relative to surface texture and tooth contact pattern checking
ISO 25178-604:2013 Geometrical product specifications (GPS).Surface texture: Areal.Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
ISO/DIS 25178-604:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments
ISO 9339-2:1998/Cor 1:2000 Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses; Technical Corrigendum 1
ISO 18593:2004 Microbiology of food and animal feeding stuffs - Horizontal methods for sampling techniques from surfaces using contact plates and swabs
ISO 25178-603:2013 Geometrical product specifications (GPS).Surface texture: Areal.Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments

RU-GOST R, surface contact disc

GOST R ISO/TS 13732-2-2008 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Part 2. Contact with moderate temperature surface
GOST R 57178-2016 Electric-contact method of surface hardening of details. Typical process
GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST R ISO 13732-3-2013 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Part 3. Cold surfaces
GOST R ISO 13732-1-2015 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Part 1. Hot surfaces
GOST R 8.651-2009 State system for ensuring the uniformity of measurements. Contact (stylus) instruments for the measurement of surface roughness. Procedure of calibration
GOST R 8.652-2009 State system for ensuring the uniformity of measurements. Contact (stylus) instruments for the measurement of surface roughness. Metrological characteristics of correct filters
GOST R 51337-1999 Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces
GOST 18961-1980 Diamond needles for suface roughness measurements. Technical conditions
GOST 14265-1979 Direct acting analogue contact electrical measuring instruments. General specifications
GOST 32321-2013 Alarms guarding surface shock-contact glass break detectors for use in buildings. General requirements and test methods

Professional Standard - Tobacco, surface contact disc

YC/T 424-2011 Determination of surface wettability of paper for cigarette.Contact angle method

Guangdong Provincial Standard of the People's Republic of China, surface contact disc

DB44/T 1872-2016 Determination of wettability of textile surfaces by contact angle method
DB44/T 1232-2013 Test Method for Determination of Surface Tension of Solid Coatings, Substrates, and Pigments Contact Angle Method

European Committee for Standardization (CEN), surface contact disc

EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
FprEN ISO 12179:2021 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO/FDIS 12179:2021)
prEN 828-1992 Adhesives; wettability; determination by measurement of contact angle and critical surface tension of solid surface
EN ISO 9341:1998 Optics and Optical Instruments - Contact Lenses - Determination of Inclusions and Surface Imperfections for Rigid Contact Lenses ISO 9341:1996
EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)
EN ISO 12179:2022 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
EN ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Calibration of Contact (Stylus) Instruments
EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
EN 828:1997 Adhesives - Wettability - Determination by Measurement of Contact Angle and Critical Surface Tension of Solid Surface
EN ISO 13732-3:2005 Ergonomic of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces
EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
EN ISO 3274:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Nominal Characteristics of Contact (Stylus) Instruments
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
EN 12228:2013 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
EN 12228:2002 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
EN 1388-2:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
PD CEN/TS 15209:2008 Tactile paving surface indicators produced from concrete, clay and stone
EN 14700:2014 Welding consumables - Welding consumables for hard-facing
EN ISO 13732-1:2006 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces
EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
EN 563:1994/A1:1999 AMD A1 Safety of Machinery - Temperatures of Touchable Surfaces - Ergonomics Data to Establish Temperature Limit Values for Hot Surfaces
EN 563:1994/prA1:1998 AMD prA1 Safety of Machinery - Temperatures of Touchable Surfaces - Ergonomics Data to Establish Temperature Limit Values for Hot Surfaces
EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
EN ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test ISO 20823:2003

German Institute for Standardization, surface contact disc

DIN 46008:1987 Flat contact surfaces for earthing screws; rated voltage not exceeds 52 kV
DIN EN ISO 8442-8:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000
DIN EN 828:2013-04 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface; German version EN 828:2013
DIN EN ISO 12179:2023-04 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021); German version EN ISO 12179:2022
DIN EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface; German version EN 828:2013
DIN EN ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); German version EN ISO 12179:2000
DIN EN ISO 13732-1:2006 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006); German version EN ISO 13732-1:2006
DIN 55660-2:2011 Paints and varnishes - Wettability - Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle
DIN EN ISO 12179:2023 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
DIN EN ISO 13732-1:2008-12 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006); German version EN ISO 13732-1:2008 / Note: DIN EN ISO 13732-1 (2006-12) remains valid alongside th...
DIN EN ISO 25178-601:2023-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO/DIS 25178-601:2023); German and English version prEN ISO 25178-601:2023 / Note: Date of issue 2023-10-06*Inten...
DIN EN ISO 3274:1998-04 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997
DIN EN 16299:2013-06 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations; German version EN 16299:2013
DIN EN ISO 19403-2:2020 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
DIN EN ISO 19403-2:2020-04 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017); German version EN ISO 19403-2:2020
DIN 32984:2023-04 Tactile walking surface indicators in public areas
DIN 41618-1:1966 Multipole connectors with blade contacts 2,5 mm 1 mm; dimensions
DIN EN ISO 8442-6:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000
DIN EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations; German version EN 16299:2013
DIN 16085:2015-03 Pressure gauges with electrical limit contact devices
DIN EN ISO 13732-1 Berichtigung 1:2007 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006); German version EN ISO 13732-1:2006, Corrigenda to DIN EN ISO 13732-1:2006-12
DIN EN ISO 25178-606:2016-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015); German version EN ISO 25178-606:2015
DIN EN 12228:2013-12 Surfaces for sports areas - Determination of joint strength of synthetic surfaces; German version EN 12228:2013
DIN EN ISO 13732-3:2008-12 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005), German version EN ISO 13732-3:2008 / Note: DIN EN ISO 13732-3 (2006-02) remains valid alongside t...
DIN EN 1388-2:1995-11 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware; German version EN 1388-2:1995
DIN EN ISO 25178-607:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments (ISO 25178-607:2019); German version EN ISO 25178-607:2019
DIN 49440-6:1989-12 Two-pole socket-outlets with earthing contact; 10 A 250 V d.c., 16 A 250 V a.c., for surface mounting and as portable type; dimensions
DIN EN ISO 25178-601:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010); German version EN ISO 25178-601:2010
DIN EN ISO 25178-605:2014-06 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014); German version EN ISO 25178-605:2014
DIN EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005), English version of DIN EN ISO 13732-3:2008-12
DIN EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006); English version of DIN EN ISO 13732-1:2008-12
DIN 46008:1987-01 Flat contact surfaces for earthing screws; rated voltage not exceeds 52 kV
DIN EN ISO 25178-601:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010); German version EN ISO 25178-601:2010
DIN CEN/TS 15209:2008 Tactile paving surface indicators produced from concrete, clay and stone; German version CEN/TS 15209:2008
DIN EN ISO 25178-603:2014-02 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013); German version EN ISO 25178-603:2013
DIN ISO 12240-2:1999 Spherical plain bearing - Part 2: Angular contact spherical plain radial bearings (ISO 12240-2:1998)
DIN 41543:1974 Side contacts for picture tubes and cathode ray tubes
DIN 10050-7:1973 Testing of butter wrappers, determination of water soluble components of the surface of the wrapper contacting butter
DIN EN ISO 13732-3:2006 Ergonomic of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005); German version EN ISO 13732-3:2005
DIN EN ISO 25178-604:2013-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013); German version EN ISO 25178-604:2013
DIN EN ISO 25178-701:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010); German version EN ISO 25178-701:2010
DIN EN ISO 20823:2003-10 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003); German version EN ISO 20823:2003
DIN EN 4875:2020-03 Aerospace series - Surface treatments - Test method for measurement of electrical contact resistance; German and English version EN 4875:2020
DIN EN ISO 25178-701:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010); German version EN ISO 25178-701:2010
DIN 41622-1:1965-01 Multipole Connectors with Blade Contacts 3 × 1 mm; Dimensions
DIN EN 14700:2014 Welding consumables - Welding consumables for hard-facing; German version EN 14700:2014
DIN EN 14700:2005 Welding consumables - Welding consumables for hard-facing; German version EN 14700:2005
DIN EN 1388-2:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware; German version EN 1388-2:1995
DIN EN ISO 8442-7:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000
DIN EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments (ISO 25178-607:2019)
DIN EN ISO 25178-602:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010); German version EN ISO 25178-602:2010

KR-KS, surface contact disc

KS A ISO TS 13732-2-2021 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces —Part 2: Human contact with surfaces at moderate temperature
KS A ISO 13732-1-2021 Ergonomics of the thermal environment —Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
KS A ISO 13732-3-2021 Ergonomics of the thermal environment —Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces
KS A ISO 3274-2019 Geometrical product specifications(GPS)－Surface texture：Profile method－Nominal characteristics of contact(stylus) instruments
KS B 1417-2018(2023) Tooth contact marking of gears

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, surface contact disc

GB/T 18153-2000 Safety of machinery-Temperatures of touchable surfaces-Ergonomics data to establish temperature limit values for hot surfaces
GB/T 24368-2009 Test method for hydrophobic contamination on glass by contact angle measurement
GB/T 16269-1996 Facial contacted wire ropes
GB/T 19600-2004 Geometrical Product Specifications(GPS)Surface texture:Profile method-Calibration of contact(stylus)instruments
GB/T 6062-2009 Geometrical Product Specifications(GPS).Surface texture:Profile method.Nominal characteristic of contact(stylus) instruments
GB/T 6062-2002 Geometrical product specifications (GPS)--Surface texture:Profile method--Nominal characteristics of contact(stylus)instruments
GB/T 42694-2023 Textiles—Testing and evaluation for surface wetting resistance—Contact angle and rolling angle method
GB/Z 18620.4-2002 Cylindrical gears--Code of inspection practice--Part 4: Recommendations relative to surface texture and tooth contact pattern checking
GB/Z 18620.4-2008 Cylindrical gears.Code of inspection practice.Part 4:Recommendations relative to surface texture and tooth contact pattern checking

PT-IPQ, surface contact disc

E 300-1974

IPC - Association Connecting Electronics Industries, surface contact disc

IPC TM-650 2.2.17-1990 Surface Roughness and Profile of Metallic Foils (Contacting Stylus Technique)
IPC TM-650 2.2.17A-2001 Surface Roughness and Profile of Metallic Foils (Contacting Stylus Technique)

Professional Standard - Ferrous Metallurgy, surface contact disc

YB/T 5359-2006 surface contact wire rope

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), surface contact disc

MSS SP-6-2007 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
MSS SP-112-2010 Quality Standard for Evaluation of Cast Surface Finishes Visual and Tactile Method
MSS SP-112-1999 Quality Standard for Evaluation of Cast Surface Finishes Visual and Tactile Method
MSS SP-112-2021 Quality Standard for Evaluation of Cast Surface Finishes Visual and Tactile Method

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., surface contact disc

SP-6-1980 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2007 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-1996 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2012 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2001 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-6-2017 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
SP-112-2016 Quality Standard for Evaluation of Cast Surface Finishes Visual and Tactile Method
SP-112-1993 Quality Standard for Evaluation of Cast Surface Finishes Visual and Tactile Method
SP-112-1999 Quality Standard for Evaluation of Cast Surface Finishes Visual and Tactile Method
SP-112-2010 Quality Standard for Evaluation of Cast Surface Finishes Visual and Tactile Method

Lithuanian Standards Office , surface contact disc

LST EN ISO 3274:2001 Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996)
LST EN ISO 12179:2001/AC:2008 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000/Cor 1:2003)
LST EN 828-2000 Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surface
LST EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
LST EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)
LST EN ISO 12179:2001 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000)
LST EN 12228-2003 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
LST EN 1388-2-2000 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
LST EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
LST EN 14700-2014 Welding consumables - Welding consumables for hard-facing
LST EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
LST EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)

AENOR, surface contact disc

UNE-EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
UNE-EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
UNE-EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)
UNE-EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
UNE-EN ISO 3274:1998 GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
UNE-EN 12228:2014 Surfaces for sports areas - Determination of joint strength of synthetic surfaces
UNE-EN ISO 25178-601:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
UNE-EN ISO 12179:2001 Geometrical Product Specifications (GPS) - Surface texture: Profil method - Calibration of contact (stylus) instruments. (ISO 12179:2000)
UNE-EN ISO 25178-701:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
UNE-EN ISO 25178-602:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)

ES-UNE, surface contact disc

UNE-EN ISO 12179:2023 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
UNE-EN ISO 19403-2:2021 Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017)
UNE-EN 4875:2020 Aerospace series - Surface treatments - Test method for measurement of electrical contact resistance (Endorsed by Asociación Española de Normalización in February of 2020.)
UNE-EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.)
UNE-EN 1388-2:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
UNE-EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)

Group Standards of the People's Republic of China, surface contact disc

T/CAQI 204-2021 Non-contact system for instant screening of human skin temperature
T/CCA 029-2022 Evaluation of food contact surface cleaning effect by using ATP monitoring and limit value requirement
T/KJFX 001-2020 Isothermal amplification method for rapid detection of Listeria spp. on food contact surfaces
T/SLIA 001-2019 Food contact materials and articles, adornment—Determination of surface area— Three-dimensional model reconstruction method
T/CSTM 00919-2023 Thermal contact resistance of thermal interface materials - Photothermal radiation technique

Electronic Components, Assemblies and Materials Association, surface contact disc

ECA EIA-364-60A-2008 TP-60A General Methods for Testing of Contact Finishes for Electrical Connectors and Sockets
ECA IS-47-1987 Contact Termination Finish Standard for Surface Mount Devices
ECA SP 4945-A-2005 Contact Retention Test Procedure for Electrical Connectors To be published as ANSI/EIA/ECA-364-29C

Japanese Industrial Standards Committee (JISC), surface contact disc

JIS B 0651 AMD 1:2022 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments (Amendment 1)
JIS B 0651 ERRATUM 2:2002 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments (Erratum 2)
JIS B 1522:1993 Rolling bearings -- Angular contact ball bearings
JIS B 1522:2012 Rolling bearings -- Angular contact ball bearings
JIS B 6064-1:2007 Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions
JIS B 6064-2:2007 Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions
JIS R 1636:1998 Test method for thickness of fine ceramic thin films -- Film thickness by contact probe profilometer

TR-TSE, surface contact disc

TS 2495-1977 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD - CONTACT (STYLUS) INSTRUMENTS OF CONSECUTIVE PROF?LE TRANSFORMATION - CONTACT PROF?LE METERS. SYSTEM M

YU-JUS, surface contact disc

JUS M.A1.031-1982 Instruments for the measurement of surface roughness by the profile method — Contactprofile meters, system M
JUS M.A1.034-1980 Instruments for the measurement of surface roughness by tne profil method-contact (stylus) instrument* of profile transformation - Profile reoording instruments

Professional Standard - Energy, surface contact disc

NB/SH/T 0567-2016 Determination of flammability of liquids in contact with hot surfaces - Manifold ignition method

国家能源局, surface contact disc

SH/T 0567-2016 Determination of flammability of liquids in contact with hot surfaces - Manifold ignition method

未注明发布机构, surface contact disc

BS EN ISO 3274:1998(1999) Geometric Product Specifications (GPS) — Surface texture : Profile method — Nominal characteristics of contact (stylus) instruments —
BS 7557:1992(2009) Specification for Limits of metal release from painted surfaces of articles, liable to come into contact with foodstuffs
DIN EN 1370:1997 Surface roughness inspection by visual tactile comparators
BS EN 1388-2:1996(2004) Materials and articles in contact with foodstuffs — Silicate surfaces — Part 2 : Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
DIN EN 563:2000 Safety of machines – Temperatures of touchable surfaces – Ergonomic data for establishing temperature limits for hot surfaces
BS ISO 12164-2:2001(2002) Hollow taper interface with flange contact surface — Part 2 : Receivers — Dimensions

Military Standards (MIL-STD), surface contact disc

DOD A-A-53992-1989 LENS, CONTACT, THREE-MIRROR, GOLDMANN

AASHTO - American Association of State Highway and Transportation Officials, surface contact disc

DIVISION I 3.30-1996 Tire Contact Area (Interim 1999;)
T 343-2012 Standard Method of Test for Density of In-Place Hot Mix Asphalt (HMA) Pavement by Electronic Surface Contact Devices
TP 68-2004 Standard Method of Test for Density of In-Place Hot-Mixed Asphalt (HMA) Pavement by Electronic Surface Contact Devices

Taiwan Provincial Standard of the People's Republic of China, surface contact disc

CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method
CNS 6410-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears-Pinion Single Tooth Contact Factor ZB Wheel Single Tooth Contact Factor ZD and Transverse Contact Ratio εα

Association of German Mechanical Engineers, surface contact disc

VDI/VDE 2602 Blatt 4-2014 Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement

PL-PKN, surface contact disc

PN BN 6091-17-1964

Professional Standard - Ocean, surface contact disc

HY/T 266-2018 Hydrophilic property testing for outside-in hollow fiber ultrafiltration membrane—Contact angle method

International Electrotechnical Commission (IEC), surface contact disc

IEC GUIDE 117:2010 Electrotechnical equipment - Temperatures of touchable hot surfaces
IEC 60203:1966 Dimensions of the crimp area of machined crimp type contacts

The American Road & Transportation Builders Association, surface contact disc

AASHTO T 343-2012 Standard Method of Test for Density of In-Place Hot Mix Asphalt (HMA) Pavement by Electronic Surface Contact Devices

AGMA - American Gear Manufacturers Association, surface contact disc

P229.29-1983 Evaluation of Endurance Limit for Contact Stress in Gears with Particular Reference to Surface Hardened Gears

CU-NC, surface contact disc

NC 08-10-1985 Welding Preparation of Surfaces to Weld

American Gear Manufacturers Association, surface contact disc

AGMA 91FTM16-1991 Contact Analysis of Gears Using a Combined Finite Element and Surface Integral Method

US-FCR, surface contact disc

FCR FED BULLETIN 374-1974 CONSTRUCTION WITH SURFACE BONDING

GM Daewoo, surface contact disc

GMKOREA EDS-T-4530-2011 Test Procedure Headrest Head Contacting Surface

National Metrological Technical Specifications of the People's Republic of China, surface contact disc

JJF 1105-2003 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method
JJF 1105-2018 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method

HU-MSZT, surface contact disc

FI-SFS, surface contact disc

SFS 8453-1987 LAIVANRAKENNUS. LAIPPATIIVISTEET.RENGASTIIVISTEET

European Committee for Electrotechnical Standardization（CENELEC）, surface contact disc

HD 1003-1990 Heating in Contact with the Front of the Domestic Cooking Appliances Burning Gas

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, surface contact disc

PREN 4875-2018 Aerospace series Surface treatments Test method for measurement of electrical contact resistance (Edition P1; Incorporating Corrigendum: 01/15/2019)

Indonesia Standards, surface contact disc

SNI 05-2182-1991 Surface-roughness equipment by instan touch type and phases transformation profile methods

Society of Automotive Engineers (SAE), surface contact disc

SAE J3260-2022 Selection and Use of Cleaners and Disinfectants for Vehicle Interior Surfaces and Exterior Touch Points

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, surface contact disc

GJB/J 5972-2007 Calibration specification for non-contact static voltmeter

American Society of Mechanical Engineers (ASME), surface contact disc

ASME B5.62M-2016 Hollow Taper Tooling With Flange-Face Contact
ASME B5.62M-2016(R2022) Hollow Taper Tooling with Flange-Face Contact

BE-NBN, surface contact disc

NBN E 22-103
NBN E 22-103-1975
NBN EN 563-1995 Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces

CEN - European Committee for Standardization, surface contact disc

EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss

BR-ABNT, surface contact disc

ABNT P-MB-320-1963

ZA-SANS, surface contact disc

SANS 10217:2008 The heat treatment of ground-engaging parts for farming implements
SANS 12240-2:2006 Spherical plain bearings Part 2: Angular contact radial spherical plain bearings

American National Standards Institute （ANSI), surface contact disc

ANSI/EIA 638:1995 Surface Mount Solderability Test
ANSI/TAPPI T558 om-2010 Surface wettability and absorbency of sheeted materials using an automated contact angle tester
ISO/DIS 5686-1:2023 Tapered polygonal interface with flat contact surface - Part 1: Shanks of type F, H, A
ISO/DIS 5686-2:2023 Tapered polygonal interface with flat contact surface - Part 2: Receivers of type F, H, A and X for shanks of type F, H and A

Professional Standard - Chemical Industry, surface contact disc

HG/T 2348-1992 The stylus method for measuring surface roughness of polyester film for magnetic tape

Professional Standard - Electron, surface contact disc

SJ 50976/6-1995 Connectors,receptacle,electrical,coaxial,radio frequency(series SMA,socket contact,8 hole surface launch for strip or microstrip transmission line),detail specification for
SJ 50976/7-1995 Connector,receptacle,electrical,coaxial,radio frequency(series SMA,pin contact,8 hole surface launch for strip or microstrip transmission line),detail specification for
SJ 50976/8-1995 Connectors,receptacle,electrical,coaxial,radio frequency(series SMA,socket contact 8 hole surface launch right angle for strip or microstrip transmission line),detail specification for

Professional Standard - Aviation, surface contact disc

HB/Z 89.2-1985 Calculation of Contact Fatigue Strength of Aeronautical Bevel Gear Tooth Surface

Professional Standard - Commodity Inspection, surface contact disc

SN/T 2896-2011 Food contact materials for export. Metal materials. Determination of phenol in coating. High performance liquid chromatography
SN/T 2897-2011 Food contact materials for export. Metal materials. Determination of epichlorohydrin in coating. Gas chromatography

AWS - American Welding Society, surface contact disc

A2.1-DC-1998 Welding Symbols Chart - Desk Size

ABMA - American Bearing Manufacturers Association, surface contact disc

12240-2-1998 Spherical Plain Bearings - Part 2: Angular Contact Radial Spherical Plain Bearings

Professional Standard - Medicine, surface contact disc

YY/T 1293.1-2016 Contacting wound dressing.Part 1: Paraffin gauze
YY/T 1293.4-2016 Contacting wound dressing.Part 4:Hydrocolloid dressing
YY 1293.5-2017 Contacting wound dressing—Part 5:Alginate dressing
YY/T 1293.4--2016
YY/T 1293.1--2016
YY/T 1293.5-2017 Contact Wound Dressings Part 5: Alginate Dressings

工业和信息化部, surface contact disc

JB/T 13925-2020 Detection method of polygonal pyramid shank with flange contact surface

Defense Logistics Agency, surface contact disc

DLA MS24133 REV K-2013 SHIELD, ELECTRICAL, CONNECTOR, FOR 34, 42, 50, AND 75 CONTACT RACK AND PANEL CONNECTOR

National Metrological Verification Regulations of the People's Republic of China, surface contact disc

JJG(电子) 05012-1988 4165-1344 Trial Verification Regulations for Contact Resistance Digital Ohmmeter

SE-SIS, surface contact disc

SIS SS-ISO 4288:1988 Rules and procedures for the measure- ment of surface roughness using stylus instruments

WRC - Welding Research Council, surface contact disc

BULLETIN 223-1977 HOT WIRE WELDING AND SURFACING TECHNIQUES