ZH
RU
ES

contact disc contact time

contact disc contact time, Total:225 items.

In the international standard classification, contact disc contact time involves: Photography, Thermodynamics and temperature measurements, Road vehicles in general, Occupational safety. Industrial hygiene, Jewellery, Water quality, Materials and articles in contact with foodstuffs, Materials and components for railway engineering, Electrical accessories, Electric traction equipment, Railway rolling stock, Aerospace engines and propulsion systems, Equipment for entertainment, Kitchen equipment, Products of the textile industry, Electromechanical components for electronic and telecommunications equipment, Leather technology, Plastics, Aerospace electric equipment and systems, Applications of information technology, Textile fibres, Fruits. Vegetables, Installations in buildings, Protection against electric shock, Electricity. Magnetism. Electrical and magnetic measurements, Bearings, Terminology (principles and coordination), Medical equipment, Laboratory medicine, Rubber, Road vehicle systems, Open systems interconnection (OSI), Interface and interconnection equipment, Printed circuits and boards, Construction materials, Surface treatment and coating, Protective equipment, Rubber and plastics products, Paints and varnishes.

Professional Standard - Machinery, contact disc contact time

JB/T 8250.2-1999 Test method for efficiency of contacts and contact duration

Association of German Mechanical Engineers, contact disc contact time

VDI/VDE 3522-1987 Time response of contact thermometers
VDI/VDE 3522 Blatt 2-2014 Dynamic behaviour of contact thermometers - Experimental determination of time percentage values

Society of Automotive Engineers (SAE), contact disc contact time

SAE J2052-2011 Test Device Head Contact Duration Analysis
SAE J2052-2005 Test Device Head Contact Duration Analysis
SAE J2052-1997 Test Device Head Contact Duration Analysis

SAE - SAE International, contact disc contact time

SAE J2052-1990 Test Device Head Contact Duration Analysis@ Information Report
SAE J2052-2016 Test Device Head Contact Duration Analysis
SAE AIR5541-2006 Recommended Actions When Disinfectants@ De-icers@ and Cleaners Come in Contact with Landing Gear Structure
SAE AIR5541A-2012 Recommended Actions When Disinfectants@ De-icers@ and Cleaners Come in Contact with Landing Gear Structure

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, contact disc contact time

GB 935-1989 Limit value of allowable continuous heat exposure time in hot environment
GB 18529-2001 Occupalional exposnre limit for acetaldehyde in the air of workplace
GB 18534-2001 Occupational exposure limit for methyl ethyl ketone in the air of workplace
GB 18560-2001 Occupational exposure limit for urea in the air of workplace
GB 18550-2001 Occupational exposure limit for acetic anhydride in the air of workplace
GB 18531-2001 Occupational exposure limit for phosphoric acid in the air of workplace
GB 18540-2001 Occupational exposure limit for calcium oxide in the air of workplace
GB 18543-2001 Occupational exposure limit for hydroquinone in the air of workplace
GB 18548-2001 Occupational exposure limit for dichlorobenzene in the air of workplace
GB 18538-2001 Occupational exposure limit for ethanolamine in the air of workplace
GB 18542-2001 Occupational exposure limit for zeolite dust in the air of workplace
GB 18536-2001 Occupational exposure limit for phosphorus oxychioride in the air of workplace
GB 18537-2001 Occupational exposure limit for maleic anhydride in the air of workplace
GB 18539-2001 Occupational exposure limit for propylene oxide in the air of workplace
GB 18556-2001 Occupational exposure limit for norgestrel in the air of workplace
GB 18551-2001 Occupational exposure limit for acetone cyanohydrin in the air of workplace
GB 18530-2001 Occupational exposure limit for carbon fiber dust in the air of workplace
GB 18544-2001 Occupational exposure limit for barite dust in the air of workplace
GB 18545-2001 Occupational exposure limit for fiberglass reinforced plastic dust in the air of workplace
GB 18546-2001 Occupational exposure limit for wollastonite dust in the air of workplace
GB 18535-2001 Occupational exposure limit for bentonite dust in the air of workplace
GB 18557-2001 Occupational exposure limit for acephate in the air of workplace
GB 18559-2001 Occupational exposure limit for trinitrotoluene in the air of workplace
GB 18561-2001 Occupational exposure limit for 1,1,1-trichloroethane in the air of workplace
GB 18552-2001 Occupational exposure limit for tantalum and its oxide in the air of workplace
GB 18553-2001 Occupational exposure limit for petroleum asphalt(fume) in the air of workplace
GB 18547-2001 Occupational exposure limit for dioctyltin-S,S'-bis(isooctylmercaptoacetate) in the air of workplace
GB 18563-2001 Occupational exposure limit for polyvinyl chloride dust in the air of workplkace
GB 18549-2001 Occupational exposure limit for 2-Ethoxyethanol in the air of workplace
GB 18541-2001 Occupational exposure limit for phenol formaldehyde resin in the air of workplace
GB 18562-2001 Occupational exposure limit for calcium cyanamide in the air of workplace
GB 18554-2001 Occupational exposure limit for carbon monoxide in the air of high altitude workplace
GB 18532-2001 Occupational exposure limit for polyacrylonitrile fibre dust in the air of workplace
GB/T 2407-2008 Plastics.Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
GB 18558-2001 Occupational exposure limit for precipitated silica dustin the air of workplace
GB 18533-2001 Occupational exposure limit for polymethylene polyphenyl isocyanate(PMPPI) in the air of workplace
GB/T 17559-1998 Information technology--Telecommunications and information exchange between systems--26-pole interface connector mateability dimensions and contact number assignments
GB/T 17959-2000 Information technology-Telecommunications and information exchange between systems-50-pole interface connector mateability dimensions and contact number assignments

Military Standard of the People's Republic of China-General Armament Department, contact disc contact time

GJB 967-1990 Short-term exposure limits for carbon monoxide in tank compartments

GM Daewoo, contact disc contact time

GMKOREA EDS-T-7795-2011 TEST METHOD FOR THE CONTACT DRYING TIME OF POLYURETHANE ADHESIVE

PL-PKN, contact disc contact time

PN E04063-05-1987 On-load tap changers Test methodes Operation time of diverter switch contacts
PN P04988-1990 Safety gloves Determination of thermoisolation in the contact whith hot object
PN C04201-1986 Rubber, \ulcanized Methods of test for staining in contaet with organie materia?
PN BN 6091-17-1964

Professional Standard - Railway, contact disc contact time

TB/T 1849-1987 Insulation gap of catenary in tunnel

Korean Agency for Technology and Standards (KATS), contact disc contact time

KS R ISO 12351-2009(2019) Road vehicles－Determination of head contact and duration in impact tests
KS C IEC 61200-413-2007(2020) Electrical installation guide－Part 413：Protection against indirect contact－Automatic disconnection of supply
KS C IEC 60130-16:2003 Connectors for frequencies below 3MHz-Part 16:Printed circuit board mounted connectors with two rows of staggered contacts and terminations with spacing of 2.54mm(0.1in)
KS C IEC 61200-413:2007 Electrical installation guide-Part 413:Protection against indirect contact-Automatic disconnection of supply
KS C IEC 60130-16:2014 Connectors for frequencies below 3MHz－Part 16：Printed circuit board mounted connectors with two rows of staggered contacts and terminations with spacing of 2.54mm(0.1in)
KS X ISO/IEC 7816-4_2001:2002 Identification cards－Integrated circuit(s) cards with contacts－Part 4：Interindustry command for interchange
KS C IEC 60130-11-2003(2008) Connectors for frequencies below 3 MHz(Mc/s)－Part 11：Edge socket connectors with closed ends and having a contact spacing of 2.54 mm(0.1 in) mating either with board mounted connectors or printed wiri
KS B ISO 5753-2-2016(2021) Rolling bearings — Internal clearance — Part 2: Axial internal clearance for four-point-contact ball bearings
KS X 3118-2007(2017) Information technology－Telecommunications and information exchange between systems－50-pole interface connector mateability dimensions and contact number assignments
KS X 3104-1995 26-pole interface connector mateability dimensions and contact number assignments
KS X ISO/IEC 7816-9:2007 Identification cards-Integrated circuit(s) cards with contacts-Part 9:Additional interindustry commands and security attributes
KS X ISO/IEC 7816-8:2007 Identification cards-Integrated circuit(s) cards with contacts-Part 8:Security related interindustry commands
KS X ISO/IEC 7816-8-2023 Identification card contact IC card Part 8: Interdepartmental exchange commands and related security
KS C IEC 60130-11:2003 Connectors for frequencies below 3 MHz(Mc/s)-Part 11:Edge socket connectors with closed ends and having a contact spacing of 2.54 mm(0.1 in) mating either with board mounted connectors or printed wiring boards with edge board contacts
KS X 3117-2007(2017) Information technology－Telecommunications and information exchange between systems－Interface connector and contact assignments for ISDN basic access interface located at reference points S and T

British Standards Institution (BSI), contact disc contact time

BS EN 1811:1998 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
BS EN 1811+A1:1999 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
BS EN 1811:2011+A1:2015 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
BS EN 1811:1998+A1:2008 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
20/30407234 DC BS ISO 13638. Buildings and civil engineering works. Sealants. Determination of resistance to prolonged exposure to water
BS EN 2349-305:2007 Aerospace series - Requirements and test procedures for relays and contactors - Bounce time
BS EN 2349-305:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time
BS ISO 5753-2:2011 Rolling bearings. Internal clearance. Axial internal clearance for four-point-contact ball bearings
BS ISO 3865:2005 Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material
BS ISO 3865:2020 Tracked Changes. Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
BS EN 2591-202:1996 Elements of electrical and optical connection - Test methods - Contact resistance at rated current
BS EN 2349-304:2007 Aerospace series - Requirements and test procedures for relays and contactors - Operate and release time
BS EN 2349-304:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time
BS EN ISO 12127-2:2007 Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials. Test method using contact heat produced by dropping small cylinders
BS ISO/IEC 13575:1995 Information technology - Telecommunications and information exchange between systems - 50-pole interface connector mateability dimensions and contact number assignments
BS ISO/IEC 11569:1994 Information technology - Telecommunications and information exchange between systems - 26-pole interface connector mateability dimensions and contact number assignments

Standard Association of Australia （SAA）, contact disc contact time

AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS/NZS 2794:1994 Information technology - Telecommunications and information exchange between systems - 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments

European Committee for Standardization (CEN), contact disc contact time

EN 1811:2011+A1:2015 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
EN 1811:2023 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
PD CEN/TR 16918:2015 Safety of toys - Children´s mouthing behaviour in contact with toys
EN 1811:1998 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin Incorporates Amendment A1: April 2008
EN 2349-305:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time
EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin
EN 1811:2011 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin (Incorporates Amendment A1: 2015)
EN 2349-304:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time
EN 2591-202:1996 Aerospace series - Elements of electrical and optical connection - Test methods - Part 202: Contact resistance at rated current
EN 16105:2011 Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water

RU-GOST R, contact disc contact time

GOST R 55649-2013 Section insulation for catenary of railways. Specifications
GOST 10456-1980 Plastics. Method for determination of incandescence resistance

American Society for Testing and Materials (ASTM), contact disc contact time

ASTM B854-98(2022) Standard Guide for Measuring Electrical Contact Intermittences
ASTM D1611-00 Standard Test Method for Corrosion Produced by Leather in Contact with Metal
ASTM D1611-00(2005) Standard Test Method for Corrosion Produced by Leather in Contact with Metal
ASTM D1611-00(2010) Standard Test Method for Corrosion Produced by Leather in Contact with Metal
ASTM F2382-17e1 Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT)
ASTM F2382-17 Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT)
ASTM F2382-18 Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT)
ASTM D1370-00(2007) Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM D1370/D1370M-12 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM F955-15(2021) Standard Test Method for Evaluating Heat Transfer Through Materials for Protective Clothing Upon Contact with Molten Substances
ASTM F2701-08 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with a Hot Liquid Splash

German Institute for Standardization, contact disc contact time

DIN EN 1811:1999 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin; German version EN 1811:1998
DIN EN 50317:2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line; German version EN 50317:2012
DIN EN 50317:2003 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line; German version EN 50317:2002
DIN EN ISO 8442-8:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000
DIN EN 2349-305:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time; German and English version EN 2349-305:2006
DIN EN 1811:2008 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin; German version EN 1811:1998+A1:2008
DIN EN ISO 8442-6:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000
DIN EN 2349-305:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time; German and English version EN 2349-305:2006
DIN EN 2349-304:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time; German and English version EN 2349-304:2006
DIN EN 2349-304:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time; German and English version EN 2349-304:2006
DIN 628-5:2011-06 Rolling bearings - Angular contact radial ball bearings - Part 5: Double row, with spacer balls
DIN EN 60603-3:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (O,1 in) centres and staggered terminations at that same spacing (IEC 60603-3:1987); German version EN 60
DIN EN 60603-4:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing (IEC 60603-4:1987); German version EN
DIN EN ISO 9773:2004-02 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003 / Note: To be replaced by DIN EN ISO 9773 (2011-04).
DIN EN ISO 8442-7:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000

CZ-CSN, contact disc contact time

CSN 35 8071 Cast.14-1988 Variable resistors. Method of measurement of contact resistance of thc moving contact at low voltage level
CSN 26 9631-1988 Unit load and rack cell. Dimensional continuity of contact surfaces
CSN OPE 34 3689-1967
CSN 26 9632-1989 Unit load and stacking equipment for rack storage. Dimensional continuity of contact surfaces

KR-KS, contact disc contact time

KS K 0853-2017(2022) Test method for determination of nickel release from products intended to come into direct and prolonged contact with the skin:Alternate exposure
KS X 3117-2007(2022) Information technology－Telecommunications and information exchange between systems－Interface connector and contact assignments for ISDN basic access interface located at reference points S and T
KS X 3118-2007(2022) Information technology－Telecommunications and information exchange between systems－50-pole interface connector mateability dimensions and contact number assignments

Association Francaise de Normalisation, contact disc contact time

NF C93-401-Ⅴ:1988 Two part multicontact connector with great number of contacts with pitch 2,54 mm - Type HE 17
FD A06-222*FD CR 12471:2002 Screening test for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin
NF L58-100-304*NF EN 2349-304:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 304 : operate and release time
NF EN 61076-6:2004 Connecteurs pour équipements électroniques - Partie 6 : pièces de contact des connecteurs électriques - Spécification intermédiaire
NF EN 2349-304:2007 Série aérospatiale - Exigences et méthodes d'essais des relais et contacteurs - Partie 304 : temps d'enclenchement et de déclenchement
NF F21-317*NF EN 50317:2013 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
NF EN 2349-305:2007 Série aérospatiale - Exigences et méthodes d'essais des relais et contacteurs - Partie 305 : temps de rebondissement
NF L58-100-305*NF EN 2349-305:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 305 : bounce time
NF EN ISO 21469:2006 Sécurité des machines - Lubrifiants en contact occasionnel avec des produits - Exigences relatives à l'hygiène
NF E22-336-2*NF ISO 5753-2:2011 Rolling bearings - Internal clearance - Part 2 : axial internal clearance for four-point-contact ball bearings
NF S11-555:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin.
NF C93-420:1984 Electronic components. Connecting devices. Multicontact board mounted connectors for pb with 2,54 mm spacing. Type he 12.
UTE C93-424U*UTE C93-424:1981 Electronic components. Connecting devices. Board mounted printed circuits connectors with contact and termination spacing of 1,27 mm. Type HE 8. Detail requirements.
NF ISO 3865:2020 Caoutchouc vulcanisé ou thermoplastique - Méthodes d'essai pour déterminer le tachage lors du contact avec des matières organiques

Danish Standards Foundation, contact disc contact time

DS/CEN/CR 12471:2002 Screening tests for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin
DS/EN 2349-305:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time
DS/EN 2349-304:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time
DS/EN 367+AC:1993 Protective clothing - Protection against heat and flames - Test method: Determination of the heat transmission on exposure to flame
DS/EN 252/AC 1:1994 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact

Electronic Components, Assemblies and Materials Association, contact disc contact time

ECA EIA-520AAAB-A-1991 Detail Specification for Nonsensitive Pushbutton Switch Momentary Contact
ECA 520AAAB-A-1991 Detail Specification for Nonsensitive Pushbutton Switch Momentary Contact
ECA 364-46B-2006 TP-46B Microsecond Discontinuity Test Procedure for Electrical Connectors, Contacts and Sockets

American National Standards Institute （ANSI), contact disc contact time

ANSI/EIA 520AAAB-A:1991 Detail Specification for Non-Sensitive Pushbutton Switch Momentary Contact
ANSI/EIA 364-46C:2012 Microsecond Discontinuity Test Procedure for Electrical Connectors, Contacts, and Sockets

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, contact disc contact time

GB/T 35263-2017 Textiles—Testing and evaluation for cool feeling in contact instant

Professional Standard - Electron, contact disc contact time

SJ 51717/2-1994 Detail specification for connectors for printed circuit board(2.54mm spacing),Type Cy4
SJ 51438.6-1995 Connectors,receptacal type PM24,for printed circuit(1.905mm spacing),detail specification for
SJ 51438/3-1995 Connectors,receptacal type PM25,for printed circuit(1.905mm spacing),detail specification for
SJ 51438/5-1995 Connectors,plug type PM23,for printed circuit(1.905mm spacing),detail specification for
SJ 51717/1-1994 Detail specification for fixed connectors for printed circuit board(3.96mm spacing),Type CY2
SJ 51438/4-1995 Connectors,plug right angle type PM156,for printed circuit(1.905mm spacing),detail specification for

Defense Logistics Agency, contact disc contact time

DLA MIL-DTL-21097/3 F VALID NOTICE 1-2013 Connectors, Electrical, Printed Wiring Board Composite, Adapter, Contact Spacing (.200) Individual Contacts, Type CS
DLA MIL-DTL-21097/15 G-2005 CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING: 0.200, ALTERNATE DUAL ROW, TYPE CS, BLADE CONTACT (NO MOUNTING PROVISION)
DLA MIL-DTL-21097/5 G-2008 CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING (.200) ALTERNATE DUAL ROW, TYPE CS
DLA MIL-DTL-21097/13 C VALID NOTICE 1-2010 Connectors, Electrical, Printed Wiring Board Composite, Receptacle, Contact Spacing: 0.200, Alternate Dual Row, Type CR, Removable Contact
DLA MIL-DTL-27434/9 A-2008 ADAPTER, CONNECTOR, COAXIAL, RADIOFREQUENCY, BETWEEN SERIES, SERIES LC, SOCKET CONTACT, TO SERIES N, SOCKET CONTACT, TYPE UG?70A/U
DLA MIL-DTL-27434/15 A-2008 ADAPTER, CONNECTOR, COAXIAL, RADIOFREQUENCY, BETWEEN SERIES, SERIES BNC, PIN CONTACT, TO SERIES HN, SOCKET CONTACT, RIGHT ANGLE, TYPE UG?59B/U
DLA MIL-C-21097/20 B VALID NOTICE 3-2013 Connectors, Electrical, Printed Wiring Board Receptacle, Card Insertion, Contact Spacing (0.050), Type AD
DLA MIL-DTL-55302/158 C VALID NOTICE 1-2009 Connectors, Printed Circuit Subassembly and Accessories; Receptacle Socket Contacts, 64 or 96 Contact Positions, for Printed Wiring Boards (.100 Inch Spacing)
DLA MIL-DTL-27434/15 A VALID NOTICE 1-2013 Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series BNC, Pin Contact, to Series HN, Socket Contact, Right Angle, Type UG-559B/U
DLA MIL-DTL-55302/90 F-2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, RIGHT ANGLE, HERMAPHRODITIC CONTACT (.100 INCH SPACING)
DLA MIL-DTL-55302/122 B VALID NOTICE 1-2013 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, 184 Contact Positions, for Printed Wiring Boards (.050 Inch Spacing)
DLA MIL-DTL-55302/122 B (2)-2013 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 184 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 INCH SPACING)
DLA MIL-DTL-27434/10 A-2008 ADAPTER, CONNECTOR, COAXIAL, RADIOFREQUENCY, BETWEEN SERIES, SERIES LC, SOCKET CONTACT, TO SERIES N, SOCKET CONTACT, FLANGE MOUNT, TYPE UG?71A/U
DLA MIL-DTL-55302/68 D VALID NOTICE 1-2013 Connectors, Printed Circuit Subassembly and Accessories: Socket, Receptacle, Electrical, Polarized (.090 Spacing) Removable Crimp Contacts
DLA MIL-DTL-55302/157 B VALID NOTICE 1-2009 Connectors, Printed Circuit Subassembly and Accessories; Plug, Straight Thru Contacts, 64 or 96 Contact Positions, for Printed Wiring Boards (.100 Inch Spacing)
DLA MIL-DTL-55302/61 G (1)-2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, AND 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
DLA MIL-DTL-21097/2 F VALID NOTICE 1-2010 Connectors, Electrical, Printed Wiring Board Composite, Receptacle, Contact Spacing (.200) Single Row, Type CR

Lithuanian Standards Office , contact disc contact time

LST EN 2349-305-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time
LST EN 2349-304-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time

ES-UNE, contact disc contact time

UNE-EN 2349-305:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time (Endorsed by AENOR in March of 2007.)
UNE-EN 2349-304:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time (Endorsed by AENOR in March of 2007.)

Taiwan Provincial Standard of the People's Republic of China, contact disc contact time

CNS 12971-6-1999 Identification cards-Integrated circuit(s) cards with contacts part 6:Interindustry data elements
CNS 12971.6-1999 Identification cards-Integrated circuit(s) cards with contacts part 6:Interindustry data elements

Professional Standard - Textile, contact disc contact time

FZ/T 50048-2020 Test method for instant cool feeling performance of chemical fiber filaments

BE-NBN, contact disc contact time

NBN-HD 1003-1992
NBN-EN 348-1993 Protective clothing. Test method: Determination of behaviour of materials on impact of small splashes of molten metal

ES-AENOR, contact disc contact time

European Association of Aerospace Industries, contact disc contact time

AECMA PREN 2349-305-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 305: Bounce Time Edition P 1
AECMA PREN 2349-304-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 304: Operate and Release Time Edition P 1

International Electrotechnical Commission (IEC), contact disc contact time

IEC TR3 61200-413:1996 Electrical installation guide - Part 413: Protection against indirect contact - Automatic disconnection of supply
IEC 60130-11A:1975 Connectors for frequencies below 3 MHz. Part 11 : Edge socket connectors with closed ends and having a contactspacing of 2.55 mm (0.1 in) mating either with board mounted connectors or printed wiring boards with edge board contacts. First supplement: Mult

IX-UIC, contact disc contact time

UIC CODE 791-3 R-2011 Safety Measures to be Adopted When Working on or Nearby Overhead Contact Lines

Group Standards of the People's Republic of China, contact disc contact time

T/SAFCM 034-2021 Determination of Migration ofIsophthalic Acidin Food Contact Materials and Products
T/NAIA 30-2021 Determination of migration of isophthalic acid in food contact materials and products
T/YNZJ 001-2021 Determination of migration of isophthalic acid in food contact materials and products
T/GDBZ 004-2020 Determination of migration of isophthalic acid in plastic materials and products used in food contact

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, contact disc contact time

PREN 2349-305-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 305: Bounce Time (Edition P 1)
PREN 2349-304-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 304: Operate and Release Time (Edition P 1)

ECIA - Electronic Components Industry Association, contact disc contact time

EIA-700A0AD-2000 Detail Specification for the Interface of the 1.27 mm Pitch@ Ribbon Contact (Leaf Spring)@ Trapezoidal Shaped@ Self-Locking I/O Connector
EIA-364-46C-2012 TP-46C Microsecond Discontinuity Test Procedures for Electrical Connectors@ Contacts and Sockets
364-46A-1998 TP-46A Microsecond Discontinuity Test Procedure for Electrical Connectors@ Contacts and Sockets
364-46B-2006 TP-46B Microsecond Discontinuity Test Procedure for Electrical Connectors@ Contacts and Sockets
EIA-700A0AA-1996 Detail Specification for 1.27 mm@ Pitch@ Ribbon Contact@ Trapezoidal Shaped@ Shielded I/O Connector

Electronic Components, Assemblies and Materials Association, contact disc contact time

ECA 520AAAC-1990 Detail Specification for Switch, Non-Sensitive, Pushbutton 15.88 mm of Mounting Hole

IN-BIS, contact disc contact time

American Society of Mechanical Engineers (ASME), contact disc contact time

ASME SEC VIII D1 NMA APP Y-2002 Appendix Y Flat Face Flanges with Metal-to-Metal Contact Outside the Bolt Circle

ZA-SANS, contact disc contact time

SANS 1477-1:2005 Pneumatic braking system connections between drawing and drawn vehicles Part 1: Contact type couplings
SANS 1477-1:2008 Pneumatic braking system connections between drawing and drawn vehicles Part 1: Contact type couplings

Japanese Industrial Standards Committee (JISC), contact disc contact time

JIS B 1520-2:2015 Rolling bearings -- Internal clearance -- Part 2: Axial internal clearance for four-point-contact ball bearings
JIS X 5111:1995 Information technology -- Telecommunications and information exchange between systems -- 26-pole interface connector mateability dimensions and contact number assignments

GOSTR, contact disc contact time

GOST EN 13832-3-2020 Occupational safety standards system. Special footwear for protection against chemicals. Part 3. Requirements for footwear resistant to prolonged contact with chemicals

International Organization for Standardization (ISO), contact disc contact time

ISO 5753-2:2010 Rolling bearings - Internal clearance - Part 2: Axial internal clearance for four-point-contact ball bearings

Indonesia Standards, contact disc contact time

SNI 05-2182-1991 Surface-roughness equipment by instan touch type and phases transformation profile methods

AENOR, contact disc contact time

UNE 20629-16:1982 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ. PRINTED CIRCUIT BOARD MOUNTED CONNECTORS WITH TWO ROWS OF STAGGERED CONTACTS AND TERMINATIONS WITH SPACING OF 2,54 MM

GM Europe, contact disc contact time

GME QE 061003-1995 An Tr鋑erblech vulkanisierte Elastomere f黵 Dichtungen Steuergeh鋟se in Kontakt mit K黨lwasser Elastomers Vulcanized to Carrier Sheet for Gaskets of Timing Housing in Contact with Cooling Water English/German
GME QE 061004-2000 An Tr鋑erblech vulkanisierte Elastomere f黵 Dichtungen Steuergeh鋟se in Kontakt mit Motor鰈 und K黨lwasser Elastomers Vulcanized to Metal Carrier for Gaskets of Timing Housing in Contact with Engine Oil and Cooling Water English/German

未注明发布机构, contact disc contact time

BS EN ISO 9773:1999(2004) Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small - flame ignition source

Canadian Standards Association (CSA), contact disc contact time

CSA ISO/IEC-13575-96-CAN/CSA:1996 Information Technology - Telecommunications and Information Exchange between Systems - 50-Pole Interface Connector Mateability Dimensions and Contact Number Assignments ISO/IEC 13575:1995

European Committee for Electrotechnical Standardization（CENELEC）, contact disc contact time

EN 60603-4:1998 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 4: Two-Part Connectors for Printed Boards Having Contacts Spaced at 1,91 mm (0,075 in) Centres and Staggered Terminations at that Same Spacing