ZH
RU
ES

Configure Contact Disc

Configure Contact Disc, Total:333 items.

In the international standard classification, Configure Contact Disc involves: Bearings, Electric traction equipment, Electric road vehicles, Materials and articles in contact with foodstuffs, Kitchen equipment, Aerospace electric equipment and systems, Services, Vocabularies, Open systems interconnection (OSI), Rails and railway components, Fibre optic communications, Electrical accessories, Transport, Packaging and distribution of goods in general, Automatic controls for household use, Road vehicles in general, Switchgear and controlgear, Burners. Boilers, Applications of information technology, Installations in buildings, Semiconducting materials, Construction of railways, Telecommunications in general, Telecommunication systems, Interface and interconnection equipment, Cutting tools, Railway rolling stock, Road vehicle systems, Networking, Medical equipment, Protection against electric shock, Electrical equipment for working in special conditions, Mining equipment, Components for electrical equipment, Welding, brazing and soldering, Electricity. Magnetism. Electrical and magnetic measurements, On-board equipment and instruments, Fasteners for aerospace construction, Earth-moving machinery, Medical sciences and health care facilities in general, Aircraft and space vehicles in general, Aerospace fluid systems and components, Integrated Services Digital Network (ISDN).


IETF - Internet Engineering Task Force, Configure Contact Disc

  • RFC 8572-2019 Secure Zero Touch Provisioning (SZTP)
  • RFC 6977-2013 Triggering DHCPv6 Reconfiguration from Relay Agents
  • RFC 7494-2015 IEEE 802.11 Medium Access Control (MAC) Profile for Control and Provisioning of Wireless Access Points (CAPWAP)

CZ-CSN, Configure Contact Disc

Japanese Industrial Standards Committee (JISC), Configure Contact Disc

  • JIS E 2201:1997 Overhead contact lines -- Fittings
  • JIS E 2001:1994 Overhead contact lines -- Fittings-vocabulary
  • JIS E 2002:1994 Overhead contact lines -- Fittings -- Test methods
  • JIS C 8201-5-10:2001 Low-voltage switchgear and controlgear -- Part 5-10: Contactor relays and auxiliary contact for contactors and motor-starters
  • JIS C 8201-5-101:2008 Low-voltage switchgear and controlgear -- Part 5-101: Contactor relays and auxiliary contact for contactors and motor-starters
  • JIS C 8201-4-1:2010 Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters: Electromechanical contactors and motor-starters
  • JIS C 8201-4-1:2007 Low-voltage switchgear and controlgear -- Part 4: Contactors and motor-starters -- Section 1: Electromechanical contactors and motor-starters
  • JIS C 8201-4-3:2010 Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters -- AC semiconductor controllers and contactors for non-motor loads
  • JIS A 8407:2000 Earth-moving machinery -- Zones of comfort and reach for controls
  • JIS X 6303:1988 Integrated circuit cards with contacts-physical characteristics and location of contacts

Korean Agency for Technology and Standards (KATS), Configure Contact Disc

  • KS R 9122-2007(2017) Overhead contact lines－Fittings－Vocabulary
  • KS X 3104-1995(2017) 26-pole interface connector mateability dimensions and contact number assignments
  • KS X 3104-1995(2021) 26-pole interface connector mateability dimensions and contact number assignments
  • KS B 8140-2014(2019) Contact type overheat safety device for gas cooking appliances
  • KS R 9141-2007(2017) Testing methods of fittings for overhead contact system of electric railway
  • KS X ISO 17686-2002(2012) Transit Communications Interface Profiles(TCIP)
  • KS X 3118-2007(2017) Information technology－Telecommunications and information exchange between systems－50-pole interface connector mateability dimensions and contact number assignments
  • KS B 8140-2014 Contact type overheat safety device for gas cooking appliances
  • KS X 3101-2007(2017) Information technology－Data communication－25-pole DTE/DCE interface connector and contact number assignments
  • KS X 3110-2006(2017) Information technology－Data communication－37－pole DTE/DCE interface connector and contact number assignments
  • KS X 3113-2006(2017) Information technology－Data communication－15－pole DTE/DCE interface connector and contact number assignments
  • KS X 3103-2007(2017) Information technology－Data communication－15 pole DTE/DCE interface connector and contact number assignments
  • KS X 3110-2006 Information technology-Data communication-37-pole DTE/DCE interface connector and contact number assignments
  • KS X 3113-2006 Information technology-Data communication-15-pole DTE/DCE interface connector and contact number assignments
  • KS X 3103-2007 Information technology-Data communication-15 pole DTE/DCE interface connector and contact number assignments
  • KS X 3113-2006(2021) Information technology－Data communication－15－pole DTE/DCE interface connector and contact number assignments
  • KS X 3110-2006(2021) Information technology－Data communication－37－pole DTE/DCE interface connector and contact number assignments
  • KS X 3102-2007(2017) Information technology－Data communication－37/9 pole DTE/DCE interface connector and contact number assignments
  • KS C IEC 62271-106:2019 High-voltage switchgear and controlgear — Part 106: Alternating current contactors, contactor-based controllers and motor-starters

German Institute for Standardization, Configure Contact Disc

  • DIN EN ISO 8442-8:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000
  • DIN EN ISO 8442-6:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000
  • DIN 16085:2015-03 Pressure gauges with electrical limit contact devices
  • DIN 6694:1981 Bulk freight wagons with pressure discharge; connections and further fitments; arrangement
  • DIN EN ISO 8442-7:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000
  • DIN EN 50119:2010 Railway applications - Fixed installations - Electric traction overhead contact lines; German version EN 50119:2009
  • DIN EN 50119:2021 Railway applications - Fixed installations - Electric traction overhead contact lines; German version EN 50119:2020
  • DIN EN 50119:2002 Railway applications - Fixed installations - Electric traction overhead contact lines; German version EN 50119:2001
  • DIN 42017:1984 Marking and coordination of the connecting leads for small motors
  • DIN 89320:1993 Double-pole contact inserts for watertight plug- and socket devices with earthing contact, 10 A d.c., 16 A a.c., 250 V
  • DIN EN 12571:1999 Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing; German version EN 12571:1998
  • DIN 4018 Bb.1:1981 Subsoil; analysis of contact pressure distribution under raft foundations; explanations and examples of analysis

U.S. Military Regulations and Norms, Configure Contact Disc

Association Francaise de Normalisation, Configure Contact Disc

  • NF EN 50696:2021 Interface de contact pour les dispositifs de connexion automatique
  • NF C63-996*NF EN 50696:2021 Contact Interface for Automated Connection Device
  • NF EN 2656:2002 Série aérospatiale - Système de raccordement - Raccords d'extrémité à souder - Configuration géométrique
  • NF F42-119*NF EN 50119:2003 Railway applications - Fixed installations - Electric traction overhead contact lines.
  • NF F42-119*NF EN 50119:2010 Railway applications - Fixed installations - Electric traction overhead contact lines
  • NF F42-119*NF EN 50119:2020 Railway applications - Fixed installations - Electric traction overhead contact lines
  • NF EN 175301-801:2007 Spécification particulière : connecteurs rectangulaires haute densité à contacts circulaires démontables à sertir
  • NF ISO 2110:1990 Technologies de l'information - Communication de données - Connecteur d'interface ETTD/ETCD à 25 pôles et affectation des numéros de contacts.
  • NF EN 50119:2020 Applications ferroviaires - Installations fixes - Lignes aériennes de contact pour la traction électrique
  • NF UTE C93-569:1990 Composants électroniques - Organes de raccordement - Contact coaxiaux pour composants multicontacts - Série KMX - Recueil de spécifications particulières
  • NF EN 3635:2014 Série aérospatiale - Embout à souder - Configuration géometrique
  • NF C63-113/A1:2007 Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads.
  • NF L43-224*NF EN 2606:2010 Aerospace series - 60o interface for adaptors, threaded, with lockring - Geometric configuration
  • NF EN 3155-002:2011 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 002 : liste et utilisation des contacts
  • NF C63-032:1978 Low-voltage switchgear and controlgear for industrial use. Terminal marking and distinctive number for auxiliary contacts of particular contactors.
  • NF EN 3155-044:2019 Série aérospatiale - Contacts électriques, utilisés dans les organes de connexion - Partie 044 : contacts électriques, mâles 044, type A, double sertissage, classe T - Norme de produit
  • NF C93-569:1990 Electronic Components Connecting devices Coaxial contact for multipole components Series KMX Detail Requirements
  • NF EN 3155-076:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 076 : contacts électriques, mâles, type A, à sertir, classe R - Norme de produit
  • NF EN 3155-053:2008 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 053 : contacts électriques, mâles 053, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-016:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 016 : contacts électriques, mâles, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-071:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 071 : contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-018:2020 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 018 : contacts électriques, mâles, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-052:2008 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 052 : contacts électriques, mâles 052, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-014:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 014 : contacts électriques, mâles, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-009:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 009 : contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-082:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 082 : contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-003:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 003 : contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-070:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 070 : contacts électriques, mâles, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-027:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 027 : contacts électriques, femelles, type A, à sertir, classe R - Norme de produit
  • NF EN 3155-005:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 005 : contacts électriques, femelles, type A, à sertir, classe T - Norme de produit
  • NF EN 3155-008:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 008 : contacts électriques, mâles, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-019:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 019 : contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
  • NF EN 3155-026:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 026 : contacts électriques, mâles, type A, à sertir, classe R - Norme de produit
  • NF EN 3155-004:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 004 : contacts électriques, mâles, type A, à sertir, classe T - Norme de produit
  • NF EN 3155-077:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 077 : contacts électriques, femelles, type A, à sertir, classe R - Norme de produit
  • NF EN 3155-015:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 015 : contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
  • NF C61-470/A12*NF EN 62019/A12:2015 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
  • NF C61-470/A11*NF EN 62019/A11:2005 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
  • NF UTE C93-422:1977 Composants électroniques - Organes de raccordement connecteurs cylindriques multicontacts - Recueil de spécifications particulières.
  • NF UTE C93-426:1977 Composants électroniques - Organes de raccordement - Connecteurs multicontacts rectangulaires à corps moulé - Recueil de spécifications particulières.
  • NF EN 3155-047:2008 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 047 : contacts électriques, femelles, type A, double sertissage, classe S - Norme de produit
  • NF EN 3155-022:2006 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 022 : contacts électriques rectangulaires mâles, type A, à sertir, classe R - Norme de produit
  • NF EN 3155-045:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 045 : contacts électriques, femelles, type A, double sertissage, classe T - Norme de produit
  • NF EN 3155-046:2008 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 046 : contacts électriques, mâles, type A, double sertissage, classe S - Norme de produit

European Committee for Electrotechnical Standardization（CENELEC）, Configure Contact Disc

  • EN 50696:2021 Contact Interface for Automated Connection Device
  • EN 50119:2009 Railway applications - Fixed installations - Electric traction overhead contact lines (Incorporates Amendment A1: 2013)

Lithuanian Standards Office , Configure Contact Disc

  • LST EN 50696-2021 Contact Interface for Automated Connection Device
  • LST EN 50119-2002 Railway applications. Fixed installations. Electric traction overhead contact lines
  • LST EN 50119-2010 Railway applications - Fixed installations - Electric traction overhead contact lines
  • LST ETS 300 377-1 Leid.1-2006 Q3 interface at the Local Exchange (LE) for configuration management of V5 interfaces and associated customer profiles;Part 1: Q3 interface specification
  • LST EN 2606-2009 Aerospace series - 60° interface for adaptors, threaded, with lockring - Geometric configuration
  • LST EN 2605-2006 Aerospace series - 24° interface for adaptors, threaded, with lockring - Geometric configuration
  • LST EN 2604-2006 Aerospace series - 8° 30' interface for adaptors, threaded, with lockring - Geometric configuration
  • LST EN 62019-2001/A11-2005 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

ES-UNE, Configure Contact Disc

  • UNE-EN 50696:2022 Contact Interface for Automated Connection Device
  • UNE-EN 50119:2021 Railway applications - Fixed installations - Electric traction overhead contact lines
  • UNE-ETS 300377-1 Ed1:2022 Q3 interface at the Local Exchange (LE) for configuration management of V5 interfaces and associated customer profiles;Part 1: Q3 interface specification (Endorsed by Asociación Española de Normalización in July of 2022.)
  • UNE-EN 2656:2001 Aerospace series. Pipe coupling. Coupling end, welded. Geometric configuration. (Endorsed by AENOR in December of 2001.)

Group Standards of the People's Republic of China, Configure Contact Disc

  • T/CCPITCSC 042-2020 Specification for delivery service without physical touch
  • T/NMB 8-2020 Specification for Delivery service without Physical touch of Meal and drinks
  • T/CFLP 0035-2022 Specification for contactless delivery service of fresh food
  • T/SHDSGY 160-2022 Technical specification for non-contact silicon wafert ransmission devices
  • T/ZZB 2217-2021 Matched precision angular contact ball bearings for numerically controlled turning machine spindle
  • T/HSJ 020-2020 General technical specifications for contactless delivery service at public pick-up points
  • T/WSJ 010-2020 General technical specification for contactless delivery service at public pick-up points
  • T/CES 184-2022 Technical guide for configuration of quick plug-pull cable connectors for medium and low voltage distribution networks
  • T/CHATA 003-2020 Standards for screening and handling of close contacts of tuberculosis patients in schools

BE-NBN, Configure Contact Disc

  • NBN C 63-158-2-1989 Low-voltage controlgear Semiconductor contactors (solid state contactors)
  • NBN-EN 27816-2-1993 Identification cards. Integrated circuit(s) with contacts. Part 2: Dimensions and location of the contacts (ISO 7816-2:1988)

ES-AENOR, Configure Contact Disc

国家市场监督管理总局、中国国家标准化管理委员会, Configure Contact Disc

  • GB/T 39451-2020 Specification for contactless delivery service of commodities

Military Standard of the People's Republic of China-General Armament Department, Configure Contact Disc

  • GJB 2293A-2021 Electrical connector contact mating dimensions and requirements
  • GJB 2293-1995 Electrical connector contact mating dimensions and requirements

YU-JUS, Configure Contact Disc

  • JUS N.K5.014-1987 Low-voltage controlgear. Contactors. Protection of a contactorby a short-circuit protective device
  • JUS N.E3.010-1985 Position ofholder thread in relation to central contact of the lampholder
  • JUS I.D6.011-1990 Information technology. Data communication. 25-pole DTE/DCE interface connector and contact number assignments

American Society for Testing and Materials (ASTM), Configure Contact Disc

  • ASTM F2071-00(2022) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
  • ASTM F2071-00(2017) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
  • ASTM F2071-00 Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
  • ASTM F2071-00(2006) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
  • ASTM F2071-00(2011) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic

SAE - SAE International, Configure Contact Disc

  • SAE AS34081-2004 CONNECTORS@ PLUG@ ELECTRIC@ 90° ASSEMBLY@ CRIMP CONTACT@ AN TYPE
  • SAE AS34081A-2012 CONNECTORS, PLUG, ELECTRIC, 90 DEGREE ASSEMBLY, CRIMP CONTACT AN TYPE
  • SAE AS430-1996 Powerplant Fire Detection Instruments - Thermal and Flame Contact Types (Turbine)
  • SAE AS34091-2004 CONNECTORS@ PLUG@ ELECTRIC@ 45 DEGREES ASSEMBLY@ CRIMP CONTACT@ AN TYPE
  • SAE AS34091A-2012 CONNECTORS, PLUG, ELECTRIC, 45 DEGREES ASSEMBLY, CRIMP CONTACT, AN TYPE
  • SAE J2052-1990 Test Device Head Contact Duration Analysis@ Information Report
  • SAE J2052-2016 Test Device Head Contact Duration Analysis
  • SAE AS430-1960 Powerplant Fire Detection Instruments - Thermal and Flame Contact Types (Turbine) (Reaffirmed Noncurrent July 2001)

Society of Automotive Engineers (SAE), Configure Contact Disc

  • SAE AS34081A-2021 CONNECTORS, PLUG, ELECTRIC, 90 DEGREE ASSEMBLY, CRIMP CONTACT AN TYPE
  • SAE AS430-2008 Powerplant Fire Detection Instruments - Thermal and Flame Contact Types (Turbine)
  • SAE AS34091A-2021 CONNECTORS, PLUG, ELECTRIC, 45 DEGREES ASSEMBLY, CRIMP CONTACT, AN TYPE
  • SAE J2052-2011 Test Device Head Contact Duration Analysis
  • SAE J2052-1997 Test Device Head Contact Duration Analysis
  • SAE AS47642A-2007 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces

Defense Logistics Agency, Configure Contact Disc

Canadian Standards Association (CSA), Configure Contact Disc

  • CSA ISO/CEI 10536-2-98-CAN/CSA:1998(R2002) Cartes d'identification - Cartes a circuit(s) integre(s) sans contact - Partie 2: Dimensions et emplacement des surfaces de couplage
  • CAN/CSA-ISO 4903:1995 Information technology - Data communication - 15-pole DTE/DCE interface connector and contact number assignments
  • CAN/CSA-ISO/IEC 2593:2002 Information technology - Telecommunications and information exchange between systems - 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments

American National Standards Institute （ANSI), Configure Contact Disc

Hunan Provincial Standard of the People's Republic of China, Configure Contact Disc

  • DB43/T 1753-2020 Service specification for non-contact distribution of catering products

International Organization for Standardization (ISO), Configure Contact Disc

  • ISO/CD 31511:2023 Requirements for contactless delivery services in cold chain logistics
  • ISO/TS 19072-3:2008 Véhicules routiers - Interface de raccordement pour dispositifs pyrotechniques, deux voies et trois voies - Partie 3: Assemblage du dispositif pyrotechnique et du connecteur faisceau - type 1
  • ISO/TS 19072-3:2012 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 3: Pyrotechnic device and harness connector assembly - type 1
  • ISO/IEC 2593:2000 Information technology - Telecommunications and information exchange between system - 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments
  • ISO/IEC 13575:1995 Information technology - Telecommunications and information exchange between systems - 50-pole interface connector mateability dimensions and contact number assignments
  • ISO 8267:1985 Aircraft; Tow bar attachment fittings; Interface requirements
  • ISO/IEC 2593:1993 Information technology — Telecommunications and information exchange between systems — 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments

European Telecommunications Standards Institute (ETSI), Configure Contact Disc

ETSI - European Telecommunications Standards Institute, Configure Contact Disc

  • GSM 04.02-1992 GSM PLMN Access Reference Configuration
  • ETSI EN 300 377-1:1999 Q3 Interface at the Local Exchange (LE) for Configuration Management of V5 Interfaces and Associated Customer Profiles; Part 1: Q3 Interface Specification (V1.2.1)
  • ETSI EN 300 253:2002 Enviromental Engineering (EE); Earthing and Bonding Configuration Inside Telecommunications Centres (V2.1.1)
  • ETSI EN 300 253:2001 Enviromental Engineering (EE); Earthing and Bonding Configuration Inside Telecommunications Centres (V2.1.0)

United States Navy, Configure Contact Disc

RO-ASRO, Configure Contact Disc

Professional Standard - Machinery, Configure Contact Disc

  • JB/T 5690-1991 Wire drawn contact heating device. Grading of energy consumption
  • JB/T 10186-2000 Rolling bearings.Specifications of matched angular contact ball bearings
  • JB/T 10186-2010 Rolling bearings-Specifications of matched angular contact ball bearings

API - American Petroleum Institute, Configure Contact Disc

  • API PUBL 45552-1994 Exposure Assessment for Marketing and Marine Distribution Workers in the Petroleum Industry with Potential Exposure to Gasoline

RU-GOST R, Configure Contact Disc

  • GOST R ISO/IEC 7816-2-2002 Information technology. Identification cards. Integrated circuit(s) cards with contacts. Part 2. Dimensions and location of the contacts
  • GOST R ISO/IEC 7816-2-2010 Identification cards. Integrated circuit cards. Part 2. Cards with contacts. Dimensions and location of the contacts
  • GOST 24753-1981 Contact terminal of electrical equipment. General technical requirements
  • GOST R 54271-2010 Anchors for overheandncontact line supports of rail ways. Specifications
  • GOST 32623-2014 Automatic tensioning devices of overhead contact line of railway. General specifications
  • GOST 25444-1990 Straight electrodes and electrode adapters for resistance spot welding. Taper fits. Dimensions
  • GOST EN 50274-2012 Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact to hazardous live parts
  • GOST R ISO/IEC 2593-1998 Information technology. Telecommunications and information exchange between systems. 34-pole DTE/DCE interface connector. Mateability dimension and contact number assignments
  • GOST IEC 62019-2016 Electrical accessories. Circuit-breakers and similar equipment for household use. Auxiliary contact units
  • GOST 25154-1982 Terminal contact blocks with flat terminals. Design, main parametrs and dimensions
  • GOST 30011.4.1-1996 Low-voltage switchgear and controlgear. Part 4. Contactors and motor-starters. Section 1. Electromechanical contactors and motor-starters

International Telecommunication Union (ITU), Configure Contact Disc

British Standards Institution (BSI), Configure Contact Disc

  • BS EN 60947-4-1:2010+A1:2012 Low-voltage switchgear and controlgear. Contactors and motor-starters. Electromechanical contactors and motor-starters
  • BS EN 50119:2009 Railway applications - Fixed installations - Electric traction overhead contact lines
  • BS EN 50119:2009+A1:2013 Railway applications. Fixed installations. Electric traction overhead contact lines
  • BS EN 50119:2020 Railway applications - Fixed installations - Electric traction overhead contact lines
  • BS EN 50119:2001 Railway applications - Fixed installations - Electric traction overhead contact lines
  • BS EN 50119:2010 Railway applications. Fixed installations. Electric traction overhead contact lines
  • 23/30442695 DC BS EN IEC 63407. Conductive charging of electric vehicles. Contact interface for automated connection device (ACD)
  • BS 6907-2:1988 Electrical installations for open-cast mines and quarries - General recommendations for protection against direct contact and electric shock
  • BS ISO 4902:1989 Information technology. Data communication. 37-pole DTE/DCE interface connector and contact number assignments
  • BS ISO 4903:1989 Information technology. Data communication. 15-pole DTE/DCE interface connector and contact number assignments
  • BS EN 60947-4-3:2000 Low-voltage switchgear and controlgear - Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
  • BS ISO/IEC 10373-3:2010 Identification cards. Test methods. Integrated circuit cards with contacts and related interface devices
  • BS ISO/IEC 10373-3:2018 Identification cards. Test methods. Integrated circuit cards with contacts and related interface devices
  • BS 1363-3:1995+A4:2012 13 A plugs, socket-outlets, adaptors and connection units. Part 3:Specification for adaptors
  • BS 689:1936 Railway mechanical signalling apparatus (signal posts semaphore signals, fittings and connections, and point connections and fittings.)
  • BS 1363-3:1995 13 A plugs, socket-outlets, adaptors and connection units. Specification for adaptors

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Configure Contact Disc

Professional Standard - Military and Civilian Products, Configure Contact Disc

  • WJ 2520-1998 General specification for rotary contact devices of self-propelled anti-aircraft guns

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Configure Contact Disc

  • GB/T 32334-2015 Rolling bearings.Matched angular contact ball bearings.Specifications
  • GB/T 15125-1994 Information technology-Data communication-25-pole DTE/DCE interface connector and contact number assignents
  • GB/T 9950-2008 Information technology.Data communication.37-pole DTE/DCE interface connector and contact number assignments
  • GB/T 9952-2008 Information technology-Data communication-15-pole DTE/DCE interface connector and contact number assignment
  • GB/T 32578-2016 Railway application—Fixed installations—Electric traction overhead contact lines
  • GB/T 17559-1998 Information technology--Telecommunications and information exchange between systems--26-pole interface connector mateability dimensions and contact number assignments
  • GB/T 17959-2000 Information technology-Telecommunications and information exchange between systems-50-pole interface connector mateability dimensions and contact number assignments
  • GB/T 9951-2008 Information technology.Telecommunication and information exchange between systems.34 pin DTE/DCE interface connector mateability dimensions and contact number assignments

SE-SIS, Configure Contact Disc

  • SIS SS-ISO 7816-2:1989 Identification cards — Integrated circuit(s) cards with contacts — Part 2: Dimensions and location of the contacts
  • SIS SS CECC 51000-1986 Generic specification: Mercury wetted change-over contact units, magnetically biased
  • SIS SS CECC 52000-1987 Generic specification: Mercury wetted change-over contact units, mecanically biased
  • SIS SS CECC 51001-1987 Blank detail specifikation:Mercury wetted change-over contact units, magnetically biased

Underwriters Laboratories (UL), Configure Contact Disc

  • UL 1363-1996 Relocatable temporary power taps
  • UL 60947-4-1A-2007 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters Second Edition

National Electrical Manufacturers Association（NEMA), Configure Contact Disc

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Configure Contact Disc

  • ITU-T Q.1062-1988 DIGITAL PLMN ACCESS SIGNALLING REFERENCE CONFIGURATION
  • ITU-T K.35-2018 Bonding configurations and earthing at remote electronic sites (Study Group 5)
  • ITU-T K.27-1991 Bonding Configurations and Earthing Inside a Telecommunication Building (Study Group V) 25 pp

HU-MSZT, Configure Contact Disc

International Electrotechnical Commission (IEC), Configure Contact Disc

  • IEC 60947-4-1:2012 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
  • IEC 60947-4-1:2018 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
  • IEC 60947-4-7:2000 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters-Electromechanical contactors and motor-staters
  • IEC 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
  • IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
  • IEC 62019:2003 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

Professional Standard - Railway, Configure Contact Disc

  • TB/T 2075.11-2010 Fittings for overhead contact system in electrification railway.Part 11:Electric connection device
  • TB/T 2075.19-2010 Fittings for overhead contact system in electrification railway.Part 19:Clamp and esuipment for connecting earth
  • TB/T 2075.17-2010 Fittings for overhead contact system in electrification railway.Part 17:Headspan connection box

国家铁路局, Configure Contact Disc

  • TB/T 2075.11-2020 Catenary components for electrified railways Part 11: Electrical connections
  • TB/T 2075.19-2020 Electrified railway catenary components Part 19: Grounding clamps and connecting devices
  • TB/T 2075.17-2020 Catenary components for electrified railways Part 17: Soft cross-connection devices

Professional Standard - Post and Telecommunication, Configure Contact Disc

  • YD/T 2299-2011 Technical requirement for XML configuration access protocol (XCAP)

ATIS - Alliance for Telecommunications Industry Solutions, Configure Contact Disc

  • T1.TR.05-1999 Network and Customer Installation Interface Connector Wiring Configuration Catalog
  • T1.239-1994 ISDN Management - User-Network Interface Protocol Profile

KR-KS, Configure Contact Disc

  • KS X 3103-2007(2022) Information technology－Data communication－15 pole DTE/DCE interface connector and contact number assignments
  • KS X 3101-2007(2022) Information technology－Data communication－25-pole DTE/DCE interface connector and contact number assignments
  • KS X 3118-2007(2022) Information technology－Telecommunications and information exchange between systems－50-pole interface connector mateability dimensions and contact number assignments
  • KS X 3102-2007(2022) Information technology－Data communication－37/9 pole DTE/DCE interface connector and contact number assignments
  • KS C 2507-1980(2022) Electric contact material for electric communication equipment and apparatus
  • KS C IEC 62271-106-2019 High-voltage switchgear and controlgear — Part 106: Alternating current contactors, contactor-based controllers and motor-starters

National Metrological Technical Specifications of the People's Republic of China, Configure Contact Disc

  • JJF 1486-2014 Calibration Specification for Calibration Devices of Non-contact Automotive Speedmeters

CENELEC - European Committee for Electrotechnical Standardization, Configure Contact Disc

  • EN 50119:2001 Railway Applications - Fixed Installations - Electric Traction Overhead Contact Lines
  • PREN 50119-2017 Railway applications - Fixed installations - Electric traction overhead contact lines

Danish Standards Foundation, Configure Contact Disc

  • DS/EN 50119:2009 Railway applications - Fixed installations - Electric traction overhead contact lines
  • DS/EN 50119/A1:2013 Railway applications - Fixed installations - Electric traction overhead contact lines
  • DS/EN 300377-1 V1.2.1:2000 Q3 interface at the Local Exchange (LE) for configuration management of V5 interfaces and associated customer profiles; Part 1: Q3 interface specification
  • DS/ISO 2110+Amd.1:1995 Information technology - Data communication - 25-pole DTE/DCE interface connector and contact number assignments
  • DS/EN 300253 V2.1.1:2003 Environmental Engineering (EE); Earthing and bonding configuration inside telecommunications centres
  • DS/ISO 4902:1994 Information technology. Data communication. 37-pole DTE/DCE interface connector and contact number assignments
  • DS/ISO 2110:1994 Information technology - Data communication -25-pole DTE/DCE interface connector and contact number assignments
  • DS/EN 28 877:1991 Information processing systems - Interface connector and contact assignments for ISDN basic access interface located at reference points S and T
  • DS/EN 2605:2006 Aerospace series - 24° interface for adaptors, threaded, with lockring - Geometric configuration
  • DS/EN 2606:2009 Aerospace series - 60° interface for adaptors, threaded, with lockring - Geometric configuration
  • DS/EN 62019/A11:2006 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
  • DS/EN 62019/A1:2003 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
  • DS/EN 62019:2003 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

PL-PKN, Configure Contact Disc

  • PN-EN 50119-2020-12 E Railway applications - Fixed installations - Electric traction overhead contact lines

AENOR, Configure Contact Disc

  • UNE-EN 50119:2010 Railway applications - Fixed installations - Electric traction overhead contact lines
  • UNE-EN 50119:2010/A1:2013 Railway applications - Fixed installations - Electric traction overhead contact lines
  • UNE 71202:1998 INFORMATION TECHNOLOGY. DATA COMMUNICATION. 37-POLE DTE/DCE INTERFACE CONNECTOR AND CONTACT NUMBER ASIGNMENTS.
  • UNE 71200:1998 INFORMATION TECHNOLOGY. DATA COMMUNICATION 25-POLE DTE/DCE INTERFACE CONNECTOR AND CONTACT NUMBER ASSIGNMENTS.
  • UNE 71203:1998 INFORMATION TECHNOLOGY. DATA COMMUNICATION. 15-POLE DTE/DCE INTERFACE CONNECTOR AND CONTACT NUMBER ASIGNMENTS.
  • UNE 71204:1998 INFORMATION TECHNOLOGY. TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS. 26-POLE INTERFACE CONNECTOR MATEABILITY DIMENSIONS AND CONTACT NUMBER ASIGNMENTS.
  • UNE 71201:1998 INFORMATION TECHNOLOGY. TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS. 34-POLE DTE/DCE INTERFACE CONNECTOR MATEABILITY DIMENSIONS AND CONTACT NUMBER ASSIGNMENTS.
  • UNE-EN 62019/A1:2003 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
  • UNE-EN 62019:2001/A12:2015 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

Professional Standard - Environmental Protection Certification Specification , Configure Contact Disc

  • HCRJ 010-1996 Combined device for domestic sewage treatment by biological contact oxidation method

Standard Association of Australia （SAA）, Configure Contact Disc

  • AS 3855/AMD 1:1997 Suitability of plumbing and water distribution systems products for contact with potable water
  • AS 2748/SUPP 1:1995 Information technology - Data communication - 25-pole DTE/DCE interface connector and contact number assignments - Interface connector and contact assignments for a DTE/DCE interface for data signalling rates above 20 000 bit/s (Supplement to AS 2748-19
  • AS 3613:1991 Information technology - Data communications - 15-pole DTE/DCE interface connector and contact number assignments
  • AS 2748:1991 Information technology - Data communication - 25-pole DTE/DCE interface connector and contact number assignments
  • AS/NZS 3612:1994 Information technology - Data communication - 37-pole DTE/DCE interface connector and contact number assignments
  • AS 3855:1994 Suitability of plumbing and water distribution systems products for contact with potable water
  • AS/NZS 4244:1994 Information technology - Telecommunications and information exchange between systems - 26-pole interface connector mateability dimensions and contact number assignments

Henan Provincial Standard of the People's Republic of China, Configure Contact Disc

  • DB41/T 1371-2017 Prosthetic orthotic configuration reception service specification

Professional Standard - Energy, Configure Contact Disc

  • DL/T 2590-2023 Technical requirements for energy feeding devices connected to distribution network

AT-ON, Configure Contact Disc

  • ONORM EN 25183-1-1992 Resistance spot welding - Electrode adaptors, male taper 1:10- Conical fixing, taper 1:10

AGMA - American Gear Manufacturers Association, Configure Contact Disc

  • 09FTM16-2009 Allowable Contact Stresses in Jacking Gear Units Used in the Offshore Industry
  • 09FTM08-2009 Load Sharing Analysis of High Contact Ratio Spur Gears in Military Tracked Vehicle Application

Indonesia Standards, Configure Contact Disc

  • SNI 04-1695-1989 Analog direct indication electrical instrument and its accessories, General requirement

Consumer Electronics Association （U.S.), Configure Contact Disc

Jiangsu Provincial Standard of the People's Republic of China, Configure Contact Disc

  • DB3205/T 1040-2022 Standards for screening and follow-up of close contacts of pulmonary tuberculosis in schools

Taiwan Provincial Standard of the People's Republic of China, Configure Contact Disc

  • CNS 13360-1994 Data Communication - 34 Pin DTE/DCE Interface Connector and pin Assignments

European Committee for Standardization (CEN), Configure Contact Disc

  • EN 2656:2001 Aerospace series - Pipe coupling - Coupling end, welded, Geometric configuration

Professional Standard-Ships, Configure Contact Disc

  • CB/Z 174-1980 Configuration and installation technical conditions of submarine shock absorber

Professional Standard - Environmental Protection, Configure Contact Disc

  • HJ/T 337-2006 Specifications for environmental protection product. Biological contact aeration complete of equipment

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Configure Contact Disc

  • PREN 3155-001-1990 Aerospace Series: Electrical Contacts Used in Connection Devices Technical Specification

AT-OVE/ON, Configure Contact Disc

  • OVE EN 50119-2021 Railway applications - Fixed installations - Electric traction overhead contact lines (german version)

AR-IRAM, Configure Contact Disc

工业和信息化部, Configure Contact Disc

  • YD/T 4017-2022 Technical requirements for optical distribution network resource management based on contactless identification
  • YD/T 4018-2022 Optical distribution network resource management test method based on contactless identification

  contact disc contact time, surface contact disc, contact plate method, glass contact dish, Contact Disc Verification, contact disc test, contact plate area, surface contact disc, floor contact dish, Contact plate specification, Contact Disc Configuration, contact plate sampling, contact disc contact time, contact plate preparation, Configure Contact Disc, contact disc english, contact plate size, Contact Disc Requirements, contact plate inspection, Contact Disc Contact Method.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved