固定源排放限值标准-分析测试百科网

GSO ISO 23210:2024 固定污染源排放烟气中 PM10/PM2,5 质量浓度的测定使用撞击式测量仪进行低浓度测量

ISO 23210:2009 specifies a standard reference method for the determination of PM10 and PM2,5 mass concentrations at stationary emission sources by use of two-stage impactors. The measurement method is especially suitable for measurements of mass concentrations below 40 mg/m3 as half-hourly averages in standard conditions (273 K, 1 013 hPa, dry gas). It is an acceptable method for the measurement in the flue gas of different installations, such as cement and steel production plants, as well as combustion processes. ISO 23210:2009 is not applicable to the sampling of flue gases that are saturated with water vapour. ISO 23210:2009 is not applicable where the majority of the particles are likely to exceed PM10, for example, in the case of raw gases or plant operating failures. ISO 23210:2009 cannot be used for the determination of the total mass concentration of dust. ISO 23210:2009 describes the design, use and theory of round-nozzle impactors. It does not exclude other types of impactors, provided these systems meet the performance criteria specified in ISO 23210:2009 in a validation of the impactor performed by an independent testing laboratory.

Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at low concentrations by use of impactors

ICS: 13.040.40
CCS
发布: 2024-04-25
实施

T/CI 336-2024 加油站挥发性有机物排放控制技术规范

本文件规定了加油站挥发性有机物排放控制的总体要求、控制措施、排放限值、监测方法、实施与监督、持续改进。本文件适用于加油站挥发性有机物的排放控制。

Technical specification for volatile organic compounds emission control at gasoline filling stations

ICS: 13.040.40
CCS: N772
发布: 2024-04-22
实施: 2024-04-22

T/CI 337-2024 油气储运过程挥发性有机物排放控制技术规范

本文件规定了油气储运过程挥发性有机物排放控制的总体要求、油气储存控制措施、油气运输控制措施、排放限值、监测方法、实施与监督、持续改进。本文件适用于油气储运过程挥发性有机物排放控制。

Technical specification for volatile organic compounds emission control during oil and gas storage and transportation

ICS: 13.040.40
CCS: N772
发布: 2024-04-22
实施: 2024-04-22

DB61/ 1830-2024 关中地区生活垃圾焚烧大气污染物排放标准

Air pollutant emission standards for domestic waste incineration in Guanzhong area

ICS: 13.040.40
CCS: Z 60
发布: 2024-04-12
实施: 2024-04-15

DB34/ 4809-2024 制鞋工业大气污染物排放标准

Air pollutant emission standards for shoemaking industry

ICS: 13.040.40
CCS: Z 60
发布: 2024-04-07
实施: 2024-07-01

DB34/ 4808-2024 汽车维修行业大气污染物排放标准

Air pollutant emission standards for the automobile maintenance industry

ICS: 13.040.40
CCS: Z 60
发布: 2024-04-07
实施: 2024-07-01

T/CIECCPA 009-2024 黄磷尾气燃烧锅炉大气污染物排放标准

本标准规定了黄磷尾气锅炉烟气中颗粒物、氮氧化物、二氧化硫、砷及其化合物、五氧化二磷的最高允许排放浓度限值。

Emission standard for atmospheric pollutants from yellow phosphorus tail gas combustion boilers

ICS: 13.040.40
CCS: N772
发布: 2024-03-11
实施: 2024-03-15

T/CIECCPA 007-2024 半导体工业氮氧化物排放要求

本文件规定了半导体行业工业生产过程中产生的大气污染物氮氧化物排放标准限值、检测要求、达标判定的要求。

Semiconductor Industry Nitrogen Oxide Emission Requirements

ICS: 13.040.40
CCS: N772
发布: 2024-03-04
实施: 2024-03-08

ASTM D6784-24 固定燃煤源产生的烟气中元素汞、氧化汞、颗粒汞和总汞的标准测试方法（安大略水电法）

Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)

ICS: 13.040.40
CCS
发布: 2024-03-01
实施

BS ISO 7935:2024 固定源排放烟气中二氧化硫质量浓度的测定自动测量系统的性能特征

Stationary source emissions. Determination of the mass concentration of sulfur dioxide in flue gases. Performance characteristics of automated measuring systems

ICS: 13.040.40
CCS
发布: 2024-02-29
实施: 2024-02-29