13.040.40 固定源排放限值 标准查询与下载

DB33/ 2563-2022 化学纤维工业大气污染物排放标准

Emission Standards of Air Pollutants for Chemical Fiber Industry

KS I ISO 21258:2022 固定源排放物.一氧化二氮（N2O）质量浓度的测定.参考方法:非色散红外法

Stationary source emissions — Determination of the mass concentration of dinitrogen monoxide(N2O) — Reference method: Non-dispersive infrared method

KS I ISO 23210:2022 固定源排放物.烟气中PM10/PM2.5质量浓度的测定.使用冲击器在低浓度下的测量

Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors

KS I ISO 12141:2022 固定源排放物.低浓度颗粒物（灰尘）质量浓度的测定.手动重量法

Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method

DB32/ 4438-2022 印刷工业大气污染物排放标准

Emission Standards of Air Pollutants for Printing Industry

BS EN 17656:2022 固定源排放 排放测量能力验证方案要求

1   Scope This document supplements the requirements of EN ISO/IEC 17043 by providing clarification and additional information for proficiency testing schemes for emission measurements. It gives specific requirements for: — competence of proficiency testing providers; — proficiency testing facility characteristics; and — design, operation and evaluation of proficiency testing schemes by means of interlaboratory comparisons. All these aspects are necessary in order to organize and conduct proficiency testing on emission measurements. Requirements on the competence of proficiency testing providers cover personnel, organisation, equipment and environment. Requirements on the proficiency testing facility characteristics cover measurement sections, measurements ports and working area for the participants. Requirements on the proficiency testing schemes cover: — design, including planning, preparations, homogeneity and stability of test atmospheres and statistical design; — operation, including handling and instruction of participants; ...

Stationary source emissions. Requirements on proficiency testing schemes for emission measurements

T/YNESS 004-2022 印刷行业挥发性有机物排放标准

规定了印刷行业挥发性有机物排放有关的术语和定义、排放控制要求、监测要求、实施与监督等

Emission standard of volatile organic compounds for printing industry

T/DGAS 030-2022 钣喷空气质量评价技术规范

本文件规定了企业钣喷中心空气质量评价的范围、评价时段、评价项目、评价方法及数据统计方法等内容。 本文件适用于汽车维修钣喷空气质量评价与管理。

Technical specification for automatic monitoring of air quality by sheet metal spraying

ASTM E1605-22 建筑物中铅的标准术语

1.1 This terminology standard covers definitions for the following: 1.1.1 Terms that are commonly used in the field of management of lead hazards in facilities; 1.1.2 Architectural terms, particularly those associated with older wood-frame buildings; and, 1.1.3 Specialized terms that may be encountered by users in reports and notices that are generated during lead hazard management activities. 1.2 This terminology standard is supplementary to Terminology E631. 1.3 Definitions adopted or derived from other documents include the following: 1.3.1 Some of the definitions in this terminology standard are adopted as exact copies from other sources. The source is briefly identified at the right margin following the definition and fully identified in Section 2. 1.3.2 Some of the definitions in this terminology standard are adapted from other sources. Changes in these definitions were made only to clarify the meaning, to incorporate related terms that also are defined in this terminology standard, or to ensure that the revised definition is consistent with those for related terms. The source is briefly identified with the words “adapted” at the right margin following the definition, and is fully identified in Section 2. 1.4 Terms within the definitions that are shown in boldface are defined in this terminology standard. 1.5 This terminology standard excludes the following: 1.5.1 Terms with a common dictionary meaning, except in cases where there is a specialized definition within the field of lead hazard management. 1.5.2 Terms that are used only in individual ASTM standards in which they are defined adequately, whether formally or by the context in which they appear. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Lead in Buildings

BS ISO 10849:2022 固定源排放 烟气中氮氧化物质量浓度的测定 自动测量系统的性能特征

1   Scope This document specifies a method for the determination of nitrogen oxides (NO x ) in flue gas of stationary sources and describes the fundamental structure and the key performance characteristics of automated measuring systems . The method allows continuous monitoring with permanently installed measuring systems of NO x emissions. This document describes extractive systems and in situ (non-extractive) systems in connection with a range of analysers that operate using, for example, the following principles: — chemiluminescence (CL); — infrared absorption (NDIR); — Fourier transform infrared (FTIR) spectroscopy; — ultraviolet absorption (NDUV); — differential optical absorption spectroscopy (DOAS); Other equivalent instrumental methods such as laser spectroscopic techniques can be used provided they meet the minimum performance requirements specified in this document. The measuring system can be validated with reference materials , in accordance with this document, or comparable methods. Automated measuring ...

Stationary source emissions. Determination of the mass concentration of nitrogen oxides in flue gas. Performance characteristics of automated measuring systems

DB34/ 4295-2022 玻璃工业大气污染物排放标准

Emission Standards of Air Pollutants for the Glass Industry

DB32/ 4386-2022 燃气电厂大气污染物排放标准

Air Pollutant Emission Standards for Gas-fired Power Plants

DB32/ 4385-2022 锅炉大气污染物排放标准

Boiler Air Pollutant Emission Standards

ISO 10849:2022 固定源排放.烟气中氮氧化物质量浓度的测定.自动测量系统的性能特征

This document specifies a method for the determination of nitrogen oxides (NOx) in flue gas of stationary sources and describes the fundamental structure and the key performance characteristics of automated measuring systems. The method allows continuous monitoring with permanently installed measuring systems of NOx emissions. This document describes extractive systems and in situ (non-extractive) systems in connection with a range of analysers that operate using, for example, the following principles: — chemiluminescence (CL); — infrared absorption (NDIR); — Fourier transform infrared (FTIR) spectroscopy; — ultraviolet absorption (NDUV); — differential optical absorption spectroscopy (DOAS); Other equivalent instrumental methods such as laser spectroscopic techniques can be used provided they meet the minimum performance requirements specified in this document. The measuring system can be validated with reference materials, in accordance with this document, or comparable methods. Automated measuring system (AMS) based on the principles listed above has been used successfully in this application for the measuring ranges as shown in Annex F.

Stationary source emissions — Determination of the mass concentration of nitrogen oxides in flue gas — Performance characteristics of automated measuring systems

DB32/T 4343-2022 固定污染源废气 颗粒物的测定 便携式振荡天平法

Portable Oscillating Balance Method for Determination of Exhaust Gas Particulates from Stationary Pollution Sources

ASTM D6830-02(2022) 用于表征可清洗过滤介质的压降和过滤性能的标准测试方法

1.1 This test method characterizes the operational performance of cleanable filter media under specified laboratory conditions. 1.2 This test method determines the airflow resistance, drag, cleaning requirements, and particulate filtration performance of pulse cleaned filter media. 1.3 This test method determines the comparative performance of cleanable filter media. 1.4 The results obtained from this test method are useful in the design, construction, and selection of filter media. 1.5 The results obtained by this test method should not be used to predict absolute performance of full scale fabric filter (baghouse) facilities, however these results will be useful in selection of proper filter media and identification of recommended operating parameters for these full scale fabric filter facilities. 1.6 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media

DB42/T 1906-2022 生物质锅炉大气污染物排放标准

Air Pollutant Emission Standards for Biomass Boilers

DB34/T 4230.12-2022 重点行业挥发性有机物治理环境管理技术规范 第12部分：化学纤维制造业

Technical Specifications for Environmental Management of Volatile Organic Compounds in Key Industries Part 12: Chemical Fiber Manufacturing

DB34/T 4230.18-2022 重点行业挥发性有机物治理环境管理技术规范 第18部分：纸包装印刷业

Technical Specifications for Environmental Management of Volatile Organic Compounds in Key Industries Part 18: Paper Packaging and Printing Industry

DB34/T 4230.19-2022 重点行业挥发性有机物治理环境管理技术规范 第19部分：塑料包装印刷业

Technical Specifications for Environmental Management of Volatile Organic Compounds in Key Industries Part 19: Plastic Packaging and Printing Industry