79.060.01 木基板材综合 标准查询与下载

T/ZZB 0220-2017 浸渍胶膜纸饰面细木工板

本标准规定了浸渍胶膜纸饰面细木工板的术语和定义、分类、基本要求、技术要求、检验方法、检验规则、标识、包装、运输、贮存、质量承诺。 本标准适用于以浸渍氨基树脂的胶膜纸为饰面材料且具有细木板结构的浸渍胶膜纸饰面细木工板。

Surface decorated blockboard with paper impregnated thermosetting resins

ASTM D5824-98(2017) 用于确定暴露于热和水的覆盖木芯层压板中粘合剂粘结层的抗分层性的标准试验方法

1.1 This test method provides a procedure to determine the quality of bond between an overlay and a wood core in an adhesively bonded laminate. The quality of bond is determined by measuring the resistance to delamination of the adhesively bonded laminate when tested under specific conditions of preparation, conditioning, and testing. Such products include, but are not limited to, window and door components, such as stiles and rails, and other overlaid panels. Typical wood-based cores are finger-jointed lumber, particleboard, oriented strand board, and hardboard. Typical overlays would be veneer, high-pressure laminate, high-density polyethylene, and fiberglass-reinforced plastic. 1.2 Adhesive bond performance as measured by resistance to delamination in this test method is suitable for use in adhesive product development, manufacturing quality control, and monitoring bonding processes. 1.3 This test method does not provide guidance for determining bond line performance for plywood products. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

T/APEP 1002-2017 绿色人造板评价标准

本标准在人造板原料来源、生产、使用过程及最终处理等方面都提出了要求；在保证产品理化指标的基础上，严格了产品有害物质排放指标；对不同等级的产品室内使用量提出了指导性建议；统一了产品的检测方法，避免了不同人造板检测方法不一致，指标不具备可比性的问题；强调了产品全生命周期的环保问题。

Friendly wood-based panel Evaluation Standard

LY/T 2874-2017 陈列用木质挂板

Display wooden hanging board

LY/T 2870-2017 绿色人造板及其制品技术要求

Technical requirements for green artificial panels and their products

SN/T 4772-2017 人造板中氟和氯含量的测定 离子色谱法

Determination of fluorine and chlorine content in artificial boards by ion chromatography

BS EN 14323:2017 木基板材.内部用三聚氰胺面板.试验方法

Wood-based panels. Melamine faced boards for interior uses. Test methods

BS EN 14322:2017 木基板材.内部用三聚氰胺面板.定义、要求和分类

Wood-based panels. Melamine faced board for interior uses. Definition, requirements and classification

ASTM D5456-17 结构复合木材产品评定的标准规范

Standard Specification for Evaluation of Structural Composite Lumber Products

17/30351407 DC BS ISO 12460-2 人造板 甲醛释放量的测定 第 2 部分. 小型室法

BS ISO 12460-2. Wood-based panels. Determination of formaldehyde release. Part 2. Small-scale chamber method

KS F ISO 16983:2016 木质板材 浸水后厚度膨胀的测定

Wood-based panels－Determination of swelling in thickness after immersion in water

KS F ISO 16998:2016 木质板材 耐湿测定 煮沸试验

Wood-based panels－Determination of moisture resistance－Boil test

KS F ISO 16983-2016 人造板浸水后厚度膨胀的测定

Wood-based panels－Determination of swelling in thickness after immersion in water

KS F ISO 16998-2016 人造板耐湿性的测定煮沸试验

Wood-based panels－Determination of moisture resistance－Boil test

DB35/T 1605-2016 室内装饰装修材料 人造板及其制品中 氨释放量试验方法

本标准规定了室内装饰装修用的人造板及其制品中氨释放量术语和定义、分类、试验方法。 本标准适用于室内装饰装修用的人造板及其制品中氨释放量的测定。

Test method for ammonia release in wood-based panels and their products for interior decoration

T/CTWPDA 01-2016 绿色产品评价规范 人造板

3.1 绿色人造板   environment-friendly wood-based panel  在原材料选用、生产、流通、使用、回收、处理等全生命周期过程中，资源能源消耗、污染排放、回收、质量品质达到国家相关环保、健康标准要求的人造板。 5.1　甲醛释放量限值 依据甲醛释放量的大小，绿色人造板分为三个等级，分别为G1、G2、G3。G3级为最高级别，G1级为最低级别。三个级别产品的甲醛释放量应符合表1的规定。                                           

Evaluation of environment-friendly product—wood-based panel

LY/T 2719-2016 人造板制造企业清洁生产审核指南

本标准规定了人造板制造企业清洁生产审核的术语和定义、审核程序、各程序的目的、要求和工作内容等。 本标准适用于人造板制造企业清洁生产的审核工作及审核报告的编写。

Cleaner production audit guideline for wood-based panel manufacturer

LY/T 2717-2016 人造板产品包装通用技术要求

本标准规定了人造板产品包装的术语和定义、分类、基本要求、技术要求、标识等内容。 本标准适用于胶合板、刨花板、纤维板及其表面装饰板等人造板产品的包装。

General specifications for packages of wood-based panels

ASTM D7249/D7249M-16 通过长臂梁柔性构造叠合板对接特性的标准试验方法

5.1 Flexure tests on flat sandwich construction may be conducted to determine the sandwich flexural stiffness, the core shear strength, and shear modulus, or the facings’ compressive and tensile strengths. Tests to evaluate core shear strength may also be used to evaluate core-to-facing bonds. 5.2 This test method is limited to obtaining the strength and stiffness of the sandwich panel facings, and to obtaining load-deflection data for use in calculating sandwich beam flexural and shear stiffness using Standard Practice D7250/D7250M. Due to the curvature of the flexural test specimen when loaded, facesheet compression strength from this test may not be equivalent to the facesheet compression strength of sandwich structures subjected to pure edgewise (in-plane) compression. 5.3 Core shear strength and shear modulus are best determined in accordance with Test Method C273 provided bare core material is available. Test Method C393 may also be used to determine core shear strength. Standard Practice D7250/D7250M may be used to calculate the flexural and shear stiffness of sandwich beams. 5.4 This test method can be used to produce facing strength data for structural design allowables, material specifications, and research and development applications; it may also be used as a quality control test for bonded sandwich panels. 5.5 Factors that influence the facing strength and shall therefore be reported include the following: facing material, core material, adhesive material, methods of material fabrication, facing stacking sequence and overall thickness, core geometry (cell size), core density, adhesive thickness, specimen geometry, specimen preparation, specimen conditioning, environment of testing, specimen alignment, loading procedure, speed of testing, facing void content, adhesive void content, and facing volume percent reinforcement. Further, facing strength may be different between precured/bonded and co-cured facesheets of the same material. Note 2: Concentrated forces on beams with thin facings and low density cores can produce results that are difficult to interpret, especially close to the failure point. Wider loading blocks and rubber pressure pads may assist in distributing the forces. Note 3: To ensure that simple sandwich beam theory is valid, a good rule of thumb for the four-point bending test is the span length divided by the sandwich thickness should be greater than 20 (L/d > 20) with the ratio of facing thickness to core thickness less than 0.1 (t/c < 0.1). 1.1 This test method covers determination of facing properties of flat sandwich constructions subjected to flexure in such a manner that the applied moments produce curvature of the sandwich facing planes and r......

Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure

ASTM D7249/D7249M-16e1 通过长梁弯曲面对夹心结构的性能的标准测试方法

1.1 This test method covers determination of facing properties of flat sandwich constructions subjected to flexure in such a manner that the applied moments produce curvature of the sandwich facing planes and result in compressive and tensile forces in the facings. Permissible core material forms include those with continuous bonding surfaces (such as balsa wood and foams) as well as those with discontinuous bonding surfaces (such as honeycomb). 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.2.1 Within the text, the inch-pound units are shown in brackets. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. NOTE 1—Alternate procedures for determining the compressive strength of unidirectional polymer matrix composites materials in a sandwich beam configuration may be found in Test Method D5467/ D5467M. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure