E13 石油钻井 标准查询与下载

SY/T 5505-2006 丛式井平台布置

本标准规定了丛式井平台位置选择原则、平台布置、平台井口布局、平台面积的确定等技术要求。 本标准适用于陆上油田丛式井的平台布置。

Platform arrangement for the cluster well

BS EN ISO 13628-10:2006 石油和天然气工业.水下采油系统的设计和操作.连接柔性管规范

ISO 13628-10:2005 defines the technical requirements for safe, dimensionally and functionally interchangeable bonded flexible pipes that are designed and manufactured to uniform standards and criteria. Minimum requirements are specified for the design, material selection, manufacture, testing, marking and packaging of bonded flexible pipes, with reference to existing codes and standards where applicable. ISO 13628-10:2005 applies to bonded flexible pipe assemblies, consisting of segments of flexible pipe body with end fittings attached to both ends. ISO 13628-10:2005 applies to pipes with a design pressure greater than or equal to 1,5 MPa (15 bar). ISO 13628-10:2005 can be used for lower design pressure pipes, though the requirements of these pipes have not been specifically addressed. ISO 13628-10:2005 does not cover flexible pipes of unbonded structure nor to flexible pipe ancillary components and does not apply to flexible pipes for use in choke and kill line applications.. ISO 13628-10:2005 can be applied to flexible pipes that include non-metallic reinforcing layers, though no effort was made to address the specific and unique technological aspects of this product, and to a bonded construction pipe that includes a material or layer construction that is covered in ISO 13628-2. ISO 13628-10:2005 can be applied to flexible pipes for pile hammer, gas flare, water supply and jetting applications, though no effort was made to address the specific and unique technological aspects relating to each of these requirements.

Petroleum and natural gas industries - Design and operation of subseaprod uction systems - Specification for bonded flexible pipe

BS EN ISO 13628-7:2006 石油和天然气工业.水下采油系统的设计和操作.完井/修井提升系统

ISO 13628-7:2005 gives requirements and recommendations for the design, analysis, materials, fabrication, testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel. It is applicable to all new C/WO riser systems and may be applied to modifications, operation of existing systems and reuse at different locations and with different floating vessels. ISO 13628-7:2005 is intended to serve as a common reference for designers, manufacturers and operators/users, thereby reducing the need for company specifications. ISO 13628-7:2005 is limited to risers, manufactured from low alloy carbon steels. Risers fabricated from special materials such as titanium, composite materials and flexible pipes are beyond the scope of ISO 13628-7:2005. Specific equipment covered by ISO 13628-7:2005 include riser joints, connectors; workover control systems; surface flow trees, surface tree tension frames, lower workover riser packages, lubricator valves, retainer valves, subsea test trees, shear subs, tubing hanger orientation systems, swivels, annulus circulation hoses, riser spiders, umbilical clamps, handling and test tools, tree cap running tools. Associated equipment not covered by ISO 13628-7:2005 include tubing hangers, internal and external tree caps, tubing hanger running tools, surface coiled tubing units, surface wireline units, surface tree kill and production jumpers.

Petroleum and natural gas industries - Design and operation of subsea production systems - Completion/workover riser systems

NF M87-272-1:2005 石油和天然气工业.完井液和材料.第1部分:完井液粘着特性的测量.

Petroleum and natural gas industries - Completion fluids and materials - Part 1 : measurement of viscous properties of completion fluids.

SY/T 5412-2005 下套管作业规程

本标准规定了直井、定向井、水平井、大位移井下套管作业的技术要求。 本标准适用于石油、天然气钻井的下套管作业。

Operation code for casing running

SY/T 5504.1-2005 油井水泥外加剂评价方法 第1部分:缓凝剂

SY/T 5504 的本部分规定了油气井注水泥作业用油井水泥缓凝剂的性能要求、评价方法及评价报告， 本部分适用于油气井注水泥作业用油井水泥缓凝剂的评价。

Evaluation method for well cement additives--Part 1: Retarder

SY/T 5504.2-2005 油井水泥外加剂评价方法 第2部分:降失水剂

SY/T 5504 的本部分规定了油气井注水泥作业用油井水泥降失水剂的性能要求、评价方法及评价报告， 本部分适用于油气井注水泥作业用油井水泥降失水剂的评价。

Evaluation method for well cement additives--Part 2: Fluid-loss additive

SY/T 5347-2005 钻井取心作业规程

本标准规定了钻井取心工具（常规取心、特殊取心）的分类及取心作业基本程序、内容和要求。 本标准适用于石油、天然气钻井取心工具取心作业。其他同等条件的钻井取心亦可参照使用。

Specification of drilling coring operation

SY/T 6543.3-2005 欠平衡钻井技术规范 第3部分:施工规程

本标准规定了液相欠平衡钻井和充气钻井的准备与实施，不包含强行起下钻、欠平衡测井和欠平衡完井作业的内容。 本标准适用于陆上欠平衡钻井作业。

Specification for underbalanced drilling technology--Part 3: Specification for construction

SY/T 6223-2005 钻井净化设备配套、安装、使用和维护

本标准规定了钻井液净化设备的配套、安装、使用和维护的要求。 本标准适用于陆上石油天然气行业钻井液净化设备的配套、安装、使用和维护。

Drilling fluid clarifying equipment arrangement, installation, operation and maintenance

SY/T 6614-2005 钻井液振动筛筛布标识推荐作法

制定本标准是为钻井液振动筛筛布（以下简称筛布）的标识提供标准程序。本标准不受安装筛布的机器类型或筛布结构（如方孔筛布、长方孔筛布、层叠筛布或筛布的类型）的影响，可对现有的大多数使用的筛布进行直接比较。 本标准首先介绍标准的标记牌，即它的位置以及标记牌上的内容，然后介绍如何获取标记牌上的信息以及一些计算实例。 使用本标准可以对筛布的性能参数进行直接比较，例如筛布的筛分能力、筛透能力以及过筛面积的大小。根据这些性能参数，用户可以计算出其他可以用作比较的性能特征，从而选择出最适合于自己使用的筛布类型。

Recommended practice for shale shaker screen cloth designation

SY/T 6615-2005 钻井液用乳化剂评价程序

本标准规定了钻井液用乳化剂的技术要求及评价方法。 本标准适用于钻井液用W/O型、O/W型乳化剂。

Evaluation procedure of emulsifiers for drilling fluids

SY/T 6616-2005 含硫油气井钻井井控装置配套、安装和使用规范

本标准规定了硫化氢含量不低于30mg/m

Specifications of well-control equipments arrangement, installation and operation for oil and gas well involving sulfide

SY/T 6426-2005 钻井井控技术规程

本标准规定了钻井井控技术的管理、实施及培训原则。 本标准适用于陆地油气田勘探、开发钻井作业中的油气井压力控制技术。

Specification for well control technology of drilling

SY/T 5955-2004 定向井井身轨迹质量

本标准规定了定向井井身轨迹质量。 本标准适用于石油天然气定向井钻井作业。

Well trajectory quality of directional well

SY/T 6199-2004 钻井设施基础规范

本标准规定了石油和天然气钻井设施基础的分类与选型、使用范围、技术要求、材料、施工及验收。 本标准适用于陆上石油和天然气钻井作业的各类钻机基础的施工。

Basic Specifications for Drilling Facilities

SY/T 5954-2004 开钻前验收项目及要求

本标准规定了石油天然气钻井的井场布置与设备基础、设备安装、钻井工程准备、后勤供应、安全和环境保护等开钻前验收项目的内容和要求。 本标准适用于陆上石油天然气钻井的一开钻进前验收。

Acceptance items and requirements before drilling

SY/T 6592-2004 固井质量评价方法

本标准规定了水泥胶结质量评价方法、因井施工质量评价方法和利用工程判别技术验证固井质量的方法。 本标准适用于油气井固井质量评价，为固井质量有缺陷的井采取补救措施提供参考。

Cementing Quality Evaluation Method

SY/T 5089-2004 石油天然气钻井日报表

本标准规定了石油天然气钻井日报表的内容和格式及填写要求。 本标准适用于石油及天然气陆上和海上钻井工程施工的钻井队。

Oil and Gas Drilling Daily Report

SY/T 5234-2004 优选参数钻井基本方法及应用

本标准规定了石油天然气钻井优选参数钻井的主要内容、基本方法、参数计算及实施的必要条件。 本标准适用于常规直径钻井。

Basic method and application of optimized parameter drilling