E13 石油钻井 标准查询与下载

SY/T 6543.2-2009 欠平衡钻井技术规范.第2部分:气相

本部分规定了气相欠平衡钻井的设计原则、装备要求和工艺规程。 本部分适用于陆地气相欠平衡钻井，包括气体钻井、雾化钻井和泡沫钻井。

Technology specification for underbalanced drilling.Part 2:Gas phase

SY/T 5619-2009 定向井下部钻具组合设计方法

本标准规定了定向井、水平井下部钻具组合的设计方法。 本标准适用于石油天然气钻井的钻具组合设计。

Methods of bottom hole assembly for planning in directional wells

SY/T 6394-2009 油井水泥与外加剂(外掺料)干混作业与气力输送规程

本标准规定了油井水泥与外加剂(外掺料)干混作业和气力输送的技术要求。 本标准适用于油井水泥与外加剂(外掺料)干混作业、混合成品的输送、储存和运输。

Operation procedures for dry-blending and air converying of oil well cement and additives(materials)

SY/T 5373-2009 钻井井下工具与作业用图形符号

本标准规定了钻井工程中井下工具、管具、井身结构及钻井作业的图形符号。 本标准适用于陆地石油天然气钻井工程中钻井井下工具与作业用图形符号，海洋石油天然气钻井工程中亦可参照使用。

Diagram and symbol for down hole drilling tools and operation

ISO 13503-2:2006/Amd 1:2009 石油和天然气工业.完井液和材料.第2部分:应用在水力压裂法和砂砾填充操作中的支撑物性能测量方法

Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations - Amendment 1: Addition of Annex B: Proppant specification

ISO 13500:2008/cor 1:2009 石油及天然气行业.钻井液材料.规范和试验.技术勘误表1

Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests; Technical Corrigendum 1

DIN EN ISO 10414-1:2009 石油和天然气工业 钻井液的现场试验 第1部分:水基液

This part of ISO 10414 provides standard procedures for determining the following characteristics of water-based drilling fluids: a) drilling fluid density (mud weight); b) viscosity and gel strength; c) filtration; d) water, oil and solids contents; e) sand content; f) methylene blue capacity; g) pH; h) alkalinity and lime content; i) chloride content; j) total hardness as calcium. Annexes A through K provide additional test methods which may be used for -- chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium; -- determination of shear strength; -- determination of resistivity; -- removal of air; -- drill-pipe corrosion monitoring; -- sampling, inspection and rejection; -- rig-site sampling; -- calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluid balances; -- permeability-plugging testing at high temperature and high pressure for two types of equipment; -- example of a report form for water-based drilling fluid.

Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids (ISO 10414-1:2008); English version of DIN EN ISO 10414-1:2009-04

BS EN ISO 13500:2008 石油和天然气工业.钻井液材料.规范和试验

This International Standard covers physical properties and test procedures for materials manufactured for use in oil- and gas-well drilling fluids. The materials covered are barite, haematite, bentonite, nontreated bentonite, OCMA-grade bentonite, attapulgite, sepiolite, technical-grade low-viscosity carboxymethylcellulose (CMC-LVT), technical-grade high-viscosity arboxymethylcellulose (CMC-HVT), starch, low-viscosity polyanionic cellulose (PAC-LV), high-viscosity polyanionic cellulose (PAC-HV) and drilling-grade Xanthomonas campestris (Xanthan gum). This International Standard is intended for the use of manufacturers of named products.

Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests

BS EN ISO 13500:2008+A1:2010 石油和天然气工业.钻井液材料.规范和试验

Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests

DIN EN ISO 13500:2009 石油和天然气工业.钻井液体材料.规范和试验

This International Standard covers physical properties and test procedures for materials manufactured for use in oil- and gas-well drilling fluids. The materials covered are barite, haematite, bentonite, nontreated bentonite, OCMA-grade bentonite, attapulgite, sepiolite, technical-grade low-viscosity carboxymethylcellulose (CMC-LVT), technical-grade high-viscosity carboxymethylcellulose (CMC-HVT), starch, low-viscosity polyanionic cellulose (PAC-LV), high-viscosity polyanionic cellulose (PAC-HV) and drilling-grade Xanthomonas campestris (Xanthan gum). This International Standard is intended for the use of manufacturers of named products.

Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2008); English version EN ISO 13500:2008

ISO 13500:2008 石油和天然气工业.钻井液体材料.规范和试验

Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests

SY/T 5504.3-2008 油井水泥外加剂评价方法.第3部分:减阻剂

SY/T 5504的本部分规定了油气井注水泥作业用油井水泥减阻剂的性能要求、评价方法以及评价报告。 本部分适用于油气井注水泥作业用油井水泥减阻剂的评价。

Evaluation method for well cement additives.Part 3:Dispersant

SY/T 5088-2008 钻井井身质量控制规范

本标准规定了石油天然气钻井井身质量控制要求。 本标准适用于石油天然气行业油气井的钻井作业。

Specification for wellbore quality

SY/T 5094-2008 钻井液用磺甲基酚醛树脂

本标准规定了钻井液用磺甲基酚醛树脂的技术要求、试验方法、检验规则及包装、标志、贮存和运输。 本标准适用于钻井液用磺甲基酚醛树脂（SMP-Ⅰ水剂、SMP-Ⅰ粉剂、SMP-Ⅱ水剂、SMP-Ⅱ粉剂）。

Sulfonated methyl pheuo-formaldehyde used in drilling fluids

SY/T 5247-2008 钻井井下故障处理推荐方法

本标准规定了钻井井下故障的分类及处理推荐方法。 本标准适用于石油、天然气钻井施工作业过程中发生的井下故障处理。

Recommended handling methods of downhole problems in driling

SY/T 5431-2008 井身结构设计方法

本标准规定了陆上石油、天然气钻井直井、定向井井身结构设计方法。 本标准适用于陆上石油、天然气钻井直井、定向井井身结构设计，水平井等特殊工艺井钻井井身结构设计也可参照执行。

The design method of casing program

SY/T 5504.4-2008 油井水泥外加剂评价方法.第4部分:促凝剂

SY/T 5504的本部分规定了油气井注水泥作业用油井水泥促凝剂的性能要求、评价方法以及评价报告。 本部分适用于油气井注水泥作业用油井水泥促凝剂的评价。

Evaluation method for well cement additives.Part 4:Accelerator

SY/T 6543.1-2008 欠平衡钻井技术规范.第1部分:液相

本部分规定了液相欠平衡钻井的设计原则、装备要求和工艺规程。 本部分适用于液相欠平衡钻井，包括充气钻井液钻井。

Technology specification for underbalanced drilling.Part 1:Liquid phase

SY/T 5814-2008 钻井液用腐植酸类处理剂中腐植酸含量的测定

本标准规定了钻井液用腐植酸类处理剂中腐植酸含量的测定方法。 本标准适用于钻井液用腐植酸类处理剂中腐植酸含量的测定。

Determination of the content of humic acid in drilling fluids additives containing the same

SY/T 6707-2008 海洋井场调查规范

本标准规定了1500m水深以内的移动式海上钻井装置井场调查的内容、方法和技术要求。 本标准适用于移动式海上钻井装置井场的工程地质和工程物探调查。

Specification for marine well site survey