E13 石油钻井 标准查询与下载
共找到 377 条与 石油钻井 相关的标准，共 26 页
本标准规定了陆地石油钻机塔型井架及其底座拆卸安装施工程序与整体运移作业要求。本标准适用于陆地石油钻机塔型井架及其底座用悬转扒杆法拆卸安装施工，及用拖拉机牵引法对塔型井架的整体运移作业。
Operation procedures for disassembly/reassembly and skidding of pyramid mast
- ICS
- 75.020
- CCS
- E13
- 发布
- 2012-08-23
- 实施
- 2012-12-01
本标准规定了潜油电泵井解卡打捞施工的设计编写、施工准备、施工步骤、资料录取、施工总结等技术要求及健康、安全、环境控制要求。本标准适用于潜油电泵井解卡打捞施工。
Process of releasing and fishing for the submersible electric pump
- ICS
- 75.020
- CCS
- E13
- 发布
- 2012-08-23
- 实施
- 2012-12-01
SY/T 5587的本部分规定了油水井水力喷砂射孔作业的施工设计、作业准备、作业程序、质量控制、健康安全环境控制和资料录取内容。本部分适用于油水井套管内水力喷砂射孔作业。
Code for conventional workover job.Part 10:Hydroblasting perforation
- ICS
- 75.020
- CCS
- E13
- 发布
- 2012-08-23
- 实施
- 2012-12-01
本标准规定了钻井用螺杆钻具的使用条件，明确了下井前应检查的内容，以及下钻、钻进、起钻的具体方法步骤；同时对螺杆钻具各部分的维修要求做出了规定；对螺杆钻具的存放、运输管理做了相应的规定。 本标准适用于循环介质为钻井液的螺杆钻具。
Operation maintenance and management for positive displacement mud motor
- ICS
- 75.020
- CCS
- E13
- 发布
- 2012-01-04
- 实施
- 2012-03-01
本标准规定了钻井液漏斗粘度计（以下简称漏斗粘度计）的技术要求、校准条件、校准项目和校准方法、校准结果处理和复校时间间隔。 本标准适用于新制造、使用中和修理后漏斗粘度计的校准。
Calibration method of drilling fluid funnel
- ICS
- 75.020
- CCS
- E13
- 发布
- 2012-01-04
- 实施
- 2012-03-01
本标准规定了页岩膨胀测试仪（以下简称页岩膨胀仪）的技术要求、校准条件、校准项目、校准方法、校准结果处理和复校时间间隔。 本标准适用于新生产、使用中和修理后的页岩膨胀仪校准。
Calibration method of shale swelling tester
- ICS
- 75.020
- CCS
- E13
- 发布
- 2012-01-04
- 实施
- 2012-03-01
Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids (ISO 13503-1:2011); English version EN ISO 13503-1:2011
- ICS
- 75.180.10
- CCS
- E13
- 发布
- 2012-01
- 实施
Petroleum and natural gas industries. Completion fluids and materials. Measurement of viscous properties of completion fluids
- ICS
- 75.180.10
- CCS
- E13
- 发布
- 2011-11-30
- 实施
- 2011-11-30
Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids
- ICS
- 75.180.10
- CCS
- E13
- 发布
- 2011-11
- 实施
This International Standard provides a standard procedure for assessing and modifying performance of solids control equipment systems commonly used in the field in petroleum and natural gas drilling fluids processing.
Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation (ISO 13501:2011); English version EN ISO 13501:2011
- ICS
- 75.180.10
- CCS
- E13
- 发布
- 2011-09
- 实施
This part of ISO 10414 provides standard procedures for determining the following characteristics of oil-based drilling fluids: a) drilling fluid density (mud weight); b) viscosity and gel strength; c) filtration; d) oil, water and solids concentrations; e) alkalinity, chloride concentration and calcium concentration; f) electrical stability; g) lime and calcium concentrations, calcium chloride and sodium chloride concentrations; h) low-gravity solids and weighting material concentrations. The annexes provide additional test methods or examples that can optionally be used for the determination of: - shear strength (Annex A); - oil and water concentrations from cuttings (Annex B); - drilling fluid activity (Annex C); - aniline point (Annex D); - lime, salinity and solids concentration (Annex E); - sampling, inspection and rejection (Annex F); - rig-site sampling (Annex G); - cuttings activity (Annex H); - active sulphides (Annex I); - calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluid balances (Annex J); - permeability plugging apparatus with set-screw secured end cap (Annex K); - permeability plugging apparatus with threaded end cap (Annex L); - elastomer compatibility (Annex M); - sand content of oil-based fluid (Annex N); - identification and monitoring of weight-material sag (Annex O); - oil-based drilling fluid test report form (Annex P).
Petroleum and natural gas industries - Field testing of drillings fluids - Part 2: Oil-based fluids (ISO 10414-2:2011); English version EN ISO 10414-2:2011, only on CD-ROM
- ICS
- 75.180.10
- CCS
- E13
- 发布
- 2011-09
- 实施
This International Standard specifies a standard procedure for assessing and modifying the performance of solids control equipment systems commonly used in the field in petroleum and natural gas drilling fluids processing. The procedure described in this International Standard is not intended for the comparison of similar types of individual pieces of equipment.
Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation
- ICS
- 75.180.10
- CCS
- E13
- 发布
- 2011-07-31
- 实施
- 2011-07-31
本标准规定了钻井液用润滑小球的要求和测试程序。 本标准适用于钻井液用塑料小球、玻璃微珠的检验与验收。
Evaluating procedure for lubricating beads of drilling fluid
- ICS
- 75.020.10
- CCS
- E13
- 发布
- 2011-07-28
- 实施
- 2011-11-01
本标准规定了钻井的时间分类、取值、技术经济评价的指标和计算方法。 本标准适用于陆地石油及天然气钻井技术统计、分析和评价。海洋钻井和地质勘查亦可参照执行。
Drilling tech-economic indexes and calculation methods
- ICS
- 75.020
- CCS
- E13
- 发布
- 2011-07-28
- 实施
- 2011-11-01
本标准规定了海洋石油天然气勘探开发作业中、弃井作业的技术及资料管理要求。 本标准适用于在中华人民共和国的内水、领海、毗连区、专属经济区、大陆架，以及中华人民共和国管辖的其他海域内进行的油气勘探、开发及生产作业。中国的石油作业者在境外的其他水域作业亦可参照使用。
Specification of offshore well abandonment
- ICS
- 75.020
- CCS
- E13
- 发布
- 2011-07-28
- 实施
- 2011-11-01
SY/T 5089-2011的本部分规定了石油及天然气陆上钻井井史的格式、内容和填写要求。 本部分适用于石油及天然气陆上钻井井史。
Well history format for drilling. Part 1: Onshore drilling
- ICS
- 75.020
- CCS
- E13
- 发布
- 2011-07-28
- 实施
- 2011-11-01
This part of ISO 10414 provides standard procedures for determining the following characteristics of oil-based drilling fluids: a) drilling fluid density (mud weight); b) viscosity and gel strength; c) filtration; d) oil, water and solids concentrations; e) alkalinity, chloride concentration and calcium concentration; f) electrical stability; g) lime and calcium concentrations, calcium chloride and sodium chloride concentrations; h) low-gravity solids and weighting material concentrations. The annexes provide additional test methods or examples that can optionally be used for the determination of: - shear strength (Annex A); - oil and water concentrations from cuttings (Annex B); - drilling fluid activity (Annex C); - aniline point (Annex D); - lime, salinity and solids concentration (Annex E); - sampling, inspection and rejection (Annex F); - rig-site sampling (Annex G); - cuttings activity (Annex H); - active sulphides (Annex I); - calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluid balances (Annex J); - permeability plugging apparatus with set-screw secured end cap (Annex K); - permeability plugging apparatus with threaded end cap (Annex L); - elastomer compatibility (Annex M); - sand content of oil-based fluid (Annex N); - identification and monitoring of weight-material sag (Annex O); - oil-based drilling fluid test report form (Annex P).
Petroleum and natural gas industries. Field testing of drilling fluids. Oil-based fluids
- ICS
- 75.180.10
- CCS
- E13
- 发布
- 2011-06-30
- 实施
- 2011-06-30
Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation
- ICS
- 75.180.10
- CCS
- E13
- 发布
- 2011-06
- 实施
Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids
- ICS
- 75.180.10
- CCS
- E13
- 发布
- 2011-06
- 实施
This International Standard covers physical properties and test procedures for materials manufactured for use in oil-and gas-wel drilling fluids.
Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2008 + AMD 1:2010); English version EN ISO 13500:2008 + A1:2010, only on CD-ROM
- ICS
- 75.180.10
- CCS
- E13
- 发布
- 2011-04
- 实施
