E38 绝缘油 标准查询与下载
共找到 308 条与 绝缘油 相关的标准，共 21 页
Evaluation of the anti-wear performance of diesel engine oil following roller wear (RFWT) method
- ICS
- 75.080
- CCS
- E38
- 发布
- 2016-12-05
- 实施
- 2017-05-01
Method for determination of ammonia resistance of refrigeration oil
- ICS
- 75.140
- CCS
- E38
- 发布
- 2016-12-05
- 实施
- 2017-05-01
Fourier transform infrared spectroscopy (FT-IR) trend analysis method for monitoring the oxidation state of petroleum-based and hydrocarbon-based lubricants in use
- ICS
- 75.140
- CCS
- E38
- 发布
- 2016-12-05
- 实施
- 2017-05-01
Specifications for unused silicone insulating liquids for electrotechnical purposes (IEC 60836:2015); German version EN 60836:2015
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2016-04
- 实施
本部分规定了变压器油中溶解气体在线监测装置的检验条件、检验项目、仪器设备和材料、检验内容及要求、检验结果处理和检验周期等。 本部分适用于变压器油中溶解气体在线监测装置专项检验项目的检验。
Testing specification for on-line monitoring device of transformation equipment.Part 2: on-line monitoring device of gases dissolved in transformer oil
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2016-01-07
- 实施
- 2016-06-01
本部分规定了变压器油中溶解气体在线监测装置的术语和定义、组成、分类、技术要求、试验项目及要求、检验规则以及标志、包装、运输和贮存。 本部分适用于变压器油中溶解气体在线监测装置的设计、生产、选型、运行、维护等。
Technical specification for on-line monitoring device of transformation equipment.Part 2: on-line monitoring device of gases dissolved in transformer oil
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2016-01-07
- 实施
- 2016-06-01
本部分规定了电容型设备及金属氧化物避雷器绝缘在线监测装置的术语和定义、技术要求、试验项目及要求、检验规则，以及标志、包装、运输和贮存。 本部分适用于电容型设备绝缘在线监测装置和金属氧化物避雷器绝缘在线监测装置。
Technical specification for on-line monitoring device of transformation equipment.Part 3: On-line insulation monitoring device of capacitive equipment and metal-oxide surge arrester
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2016-01-07
- 实施
- 2016-06-01
本部分规定了变电设备在线监测装置装置的技术要求，试验，检验规则，标志、包装、运输和贮存等。 本部分适用于变压器、电抗器、断路器、气体绝缘金属封闭开关设备(GIS)、电容型设备、金属氧化物避雷器等变电设备的在线监测装置，其他在线监测装置可参照执行。
Technical specification for on-line monitoring device of transformation equipment.Part 1: general technical specification
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2016-01-07
- 实施
- 2016-06-01
1.1 This specification covers unused mineral insulating oil of petroleum origin for use as an insulating and cooling medium in new and existing power and distribution electrical apparatus, such as transformers, regulators, reactors, circuit breakers, switchgear, and attendant equipment. 1.2 This specification is intended to define a mineral insulating oil that is functionally interchangeable and miscible with existing oils, is compatible with existing apparatus and with appropriate field maintenance,2 and will satisfactorily maintain its functional characteristics in its application in electrical equipment. This specification applies only to new insulating oil as received prior to any processing. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2016
- 实施
Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids using the TOST test. Anhydrous procedure for synthetic hydraulic fluids
- ICS
- 75.120
- CCS
- E38
- 发布
- 2015-12-31
- 实施
- 2015-12-31
本标准规定了充油电气设备（如变压器、断路器、电抗器、互感器等）用矿物绝缘油中腐蚀性硫的定量测试方法。 本标准适用于矿物绝缘油中腐蚀性硫的定量测试。
Test method for quantitative determination of corrosive sulfur in mineral insulating oils Copper powder corroding test
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2015-07-01
- 实施
- 2015-12-01
本标准规定了变压器油中溶解气体组分含量分析用工作标准油的配制方法。 本标准适用于变压器油中溶解气体组分含量分析用工作标准油的配制。
Preparation of the working standard oil for transformer oil dissolved gas composition content in the analysis
- ICS
- 71.040.40
- CCS
- E38
- 发布
- 2015-07-01
- 实施
- 2015-12-01
本标准规定了矿物绝缘油中苯并三氮唑及其衍生物类金属钝化剂含量的高效液相色谱测定方法。本标准适用于未使用和运行中矿物绝缘油中苯并三氮唑及其衍生物类金属钝化剂[N-2(2-乙基己基)-氨甲基-甲基苯并三氮唑(TTAA)，苯并三氮唑(BTA)，5-甲基苯并三氮唑(TTA)]含量的测定，测定浓度范围5mg/kg～500mg/kg。
Quantitative determination of metal passivators in mineral insulating oils (HPLC)
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2015-07-01
- 实施
- 2015-12-01
本标准规定了绝缘油中含气量的气相色谱测定方法。本标准适用于充油电气设备用绝缘油含气量的测定。
Determination of dissolved gas content in insulating oil by gas chromatography
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2015-07-01
- 实施
- 2015-12-01
本标准规定了充油电气设备（如变压器、断路器、电抗器、互感器等）用矿物绝缘油中铜、铁、铝、锌金属含量（原子吸收光谱法）的测定方法。 本标准适用于铜、铁、铝、锌金属含量为0.01 mg/kg~5 mg/kg矿物绝缘油样品的测定。
Determination of copper, iron, aluminum and zinc contents in mineral insulating oil-Atomic absorption spectrometry method
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2015-07-01
- 实施
- 2015-12-01
Guide to the interpretation of carbon dioxide and 2-furfuraldehyde as markers of paper thermal degradation in insulating mineral oil
- ICS
- 29.035.10;29.040.10
- CCS
- E38
- 发布
- 2015-05
- 实施
本标准规定了110kV及以上电压等级油浸式变压器(电抗器、换流变压器)测温装置(简称测温装置)现场校准的技术要求、校准方法、校准数据的处理以及校准周期等内容，其他电压等级测温装置可参照执行。本标准适用于已经实验室校准并安装到现场使用的测温装置现场校准。本标准不适用于采用光纤传感器的测温装置现场校准。
Calibration specification for local temperature measuring equipment of oil transformer
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2015-04-02
- 实施
- 2015-09-01
Insulating oils. Detection of corrosive sulfur. Silver strip test
- ICS
- 75.100
- CCS
- E38
- 发布
- 2015
- 实施
- 2017-01-01
Insulating liquids. Determination of acidity. Test methods for non mineral insulating oils
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2014-11-30
- 实施
- 2014-11-30
本标准规定了利用变压器油(矿物绝缘油)中溶解气体和游离气体含量进行充油电气设备故障识别和故障类型判断的方法，以及建议进一步采取的措施。 本标准适用于以变压器油和纸(板)为主要绝缘材料的电气设备，包括变压器、电抗器、互感器和套管等。
Guide to the analysis and the diagnosis of gases dissolved in transformer oil
- ICS
- 29.040.10
- CCS
- E38
- 发布
- 2014-10-15
- 实施
- 2015-03-01
