J95 润滑系统 标准查询与下载
共找到 136 条与 润滑系统 相关的标准，共 10 页
Oil pumps for internal combustion engines - Part 11: Transmission oil pumps
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-02
- 实施
- 2020-04-01
Composite material oil filters for internal combustion engines Part 2: Filter element technical conditions
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-02
- 实施
- 2020-04-01
Oil pumps for internal combustion engines - Part 9: Electronically controlled oil pumps
- ICS
- 27.020
- CCS
- J95
- 发布
- 2019-08-02
- 实施
- 2020-04-01
JB/T 5088的本部分规定了内燃机旋装式机油滤清器性能的试验项目、装置、方法和程序。 本部分适用于中小功率内燃机的旋装式机油滤清器。
Internal combustion engines.Spin-on oil filters.Part2:Test method
- ICS
- 27.02
- CCS
- J95
- 发布
- 2018-07-04
- 实施
- 2019-05-01
JB/T 5088的本部分规定了内燃机旋装式机油滤清器的技术要求、试验方法、检查规则和标志、包装、运输和贮存。 本部分适用于中小功率内燃机的旋装式机油滤清器总成（以下简称总成）。
Internal combustion engines.Spin-on oil filters.Part1:Specification
- ICS
- 27.02
- CCS
- J95
- 发布
- 2018-07-04
- 实施
- 2019-05-01
Process specifications for remanufactured internal combustion engine oil pumps
- ICS
- 27.02
- CCS
- J95
- 发布
- 2018-02-09
- 实施
- 2018-10-01
This document specifies a multi-pass filtration test with continuous contaminant injection and using the online particle counting method for evaluating the performance of full-flow lubricating oil filters for internal combustion engines. The scope of this document is limited to steady state conditions and does not address fluctuations in the flow rate. The test procedure determines the contaminant capacity of a filter, its particulate removal characteristics and differential pressure. This test is intended for application to filter elements with an efficiency of less than 99 % at particle size greater than 10 μm. NOTE Several test flow loops built into one test rig, or several test rigs, would be necessary to cover the complete flow range of 2 l/min to 600 l/min.
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting and contaminant retention capacity
- ICS
- 27.020
- CCS
- J95
- 发布
- 2017-05
- 实施
Classification and detection method of pollutant particles in internal combustion engine lubricating oil
- ICS
- 27.020
- CCS
- J95
- 发布
- 2016-10-22
- 实施
- 2017-04-01
本标准规定了柴油机油气分离器的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于中小功率(350 kW以下)柴油机油气分离器。
Diesel engines.Oil separator
- ICS
- 27.020
- CCS
- J95
- 发布
- 2016-10-22
- 实施
- 2017-04-01
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings
- ICS
- 27.020
- CCS
- J95
- 发布
- 2016-02
- 实施
本标准规定了内燃机机油散热器的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于管片式、管带式、封条式及胀接式内燃机机油散热器(以下简称散热器)。
Internal combustion engines.Oil radiators.Specification
- ICS
- 27.020
- CCS
- J95
- 发布
- 2016-01-15
- 实施
- 2016-06-01
JB/T 5088的本部分规定了内燃机旋装式机油滤清器的主要特征尺寸。 本部分适用于中小功率内燃机用旋装式机油滤清器（以下简称滤清器）。
Internal combustion engines.Spin-on oil filters.Part 3: Dimensions
- ICS
- 27.020
- CCS
- J95
- 发布
- 2014-05-06
- 实施
- 2014-10-01
This part of ISO 4548 specifies a method of testing the ability of full-flow lubricating oil filters for internal combustion engines to withstand an internal pressure surge such as occurs when an engine is started from cold, and cyclic internal pressure variations experienced during operation.
Methods of test for full-flow lubricating oil filters for internal combustion engines.Part 5: Test for cold start simulation and hydraulic pulse durability
- ICS
- 27.020
- CCS
- J95
- 发布
- 2013-07
- 实施
This part of ISO 4548 specifies a method of testing full-flow lubricating oil filters for internal combustion engines to determine their ability to withstand a static pressure objective and to determine their burst pressure and the failure mode concerned. It does not apply to filters for use in aeronautical applications or plastic components.
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
- ICS
- 27.020
- CCS
- J95
- 发布
- 2012-09
- 实施
JB/T 6019的本部分规定了22kW～735kW液力驱动的离心式机油滤清器的试验方法。 本部分适用于内燃机用液力驱动的离心式机油滤清器（以下简称离心式机油滤）。
Internal combustion engines.Centrifugal oil filters.Part 2: Test method
- ICS
- 27.020
- CCS
- J95
- 发布
- 2011-05-18
- 实施
- 2011-08-01
本标准规定了带式输送机配件滚筒的产品规格、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于带式输送机用滚筒，不适用于煤矿用带式输送机用滚筒。
Belt Conveyor Accessories Roller
- ICS
- 53.040.10
- CCS
- J95
- 发布
- 2011/04/30
- 实施
- 2011/04/30
Centralised lubrication systems - Concepts - Part 1: Classification
- ICS
- 01.040.21;21.260
- CCS
- J95
- 发布
- 2010-10
- 实施
- 2010-10-01
JB/T 8413的本部分规定了内燃机用外啮合渐开线齿轮泵总成和内啮合摆线齿轮泵总成两种机油泵总成的术语和定义、参数及代号、技术要求、试验方法、试验项目、检验规则和标志、包装、运输和贮存。 本部分适用于内燃机用齿轮泵和转子泵。内啮合渐开线齿轮泵可参照本部分。
Internal combustion engines.Oil pumps.Part 1:Assemblies.Specification
- ICS
- 27.020
- CCS
- J95
- 发布
- 2010-02-11
- 实施
- 2010-07-01
JB/T 8413的本部分规定了内燃机机油泵常用的外啮合渐开线齿轮泵和内啮合摆线齿轮泵及其他容积式机油泵的试验项目、试验条件、试验装置及参数测量、性能试验规范和试验结果的整理。 本部分适用于内燃机用齿轮泵和转子泵及其他容积式机油泵总成性能试验。
Internal combustion engines.Oil pumps.Part 2:Assemblies.Methods for test
- ICS
- 27.020
- CCS
- J95
- 发布
- 2010-02-11
- 实施
- 2010-07-01
