J95 润滑系统 标准查询与下载
共找到 136 条与 润滑系统 相关的标准，共 10 页
This part of ISO 7967 defines terms relating to lubricating systems. ISO 2710 gives a classification of reciprocating internal combustion engines and defines basic terms of such engines and their characteristics.
Reciprocating internal combustion engines - Vocabulary of components and systems - Lubricating systems
- ICS
- 01.040.27;27.020
- CCS
- J95
- 发布
- 2005-10-31
- 实施
- 2005-10-31
This International Standard specifies the essential dimensions necessary for interchangeably of spin-on filters of the full-flow type for the filtration of lubricating oil for internal combustion engines. It also gives the designation and marking of these filters.
Internal combustion engines - Spin-on filters for lubricating oil - Dimensions
- ICS
- 43.060.30
- CCS
- J95
- 发布
- 2005-06
- 实施
本标准规定了内燃机机油散热器的技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于管片式和管带式钎焊机油散热器及胀接式机油散热器(以下简称散热器)。
Internal combustion engines - Oil radiators - Specification
- ICS
- 27.020
- CCS
- J95
- 发布
- 2005-02-14
- 实施
- 2005-08-01
이 규격은 내연 기관에서 사용하는 전류 윤활 오일 필터의 압력 손실/유동 특성 시험 방법에
Methods of test for full-flow lubricating oil filters for internal combustion engines－Part 1：Differential pressure/flow characteristics
- ICS
- 27.020
- CCS
- J95
- 发布
- 2002-09-30
- 实施
- 2002-09-30
이 규격은 유량 가변의 압력 보상붙이 유량 조정 밸브 중 서브플레이트 또는 직접 기계에 개
Pressure compensating type flow controlvalves for oil-hydraulic use
- ICS
- 23.100.30
- CCS
- J95
- 发布
- 2001-12-31
- 实施
- 2001-12-31
This part of ISO 4548 specifies a multi-pass filtration test with continuous contaminant injection and using the on-line particle counting method for evaluating the performance of full-flow lubricating oil filters for internal combustion engines. The test procedure determines the contaminant capacity of a filter, its particulate removal characteristics and differential pressure. This test is intended for application to filter elements having a rated flow between 4 l/min and 600 l/min and with an efficiency of less than 99 % at a particle size greater than 10 μm. NOTE Several test flow loops built into one test rig, or several test rigs, would be required to cover the complete flow range of 4 l/min to 600 l/min.
Full-flow lubricating oil filters for internal combustion engines. Filtration efficiency using particle counting, and contaminant retention capacity
- ICS
- 21.260
- CCS
- J95
- 发布
- 2000-05-15
- 实施
- 2000-05-15
This part of ISO 4548 specifies a multi-pass filtration test with continuous contaminant injection and using the on-line particle counting method for evaluating the performance of full-flow lubricating oil filters for internal combustion engines. The test procedure determines the contaminant capacity of a filter, its particulate removal characteristics and differential pressure. This test is intended for application to filter elements having a rated flow between 4 l/min and 600 l/min and with an efficiency of less than 99 % at a particle size greater than 10 μm. NOTE Several test flow loops built into one test rig, or several test rigs, would be required to cover the complete flow range of 4 l/min to 600 l/min.
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
- ICS
- 21.260
- CCS
- J95
- 发布
- 2000-02
- 实施
Product Quality Grading of Paper Filter Elements for Internal Combustion Engine Oil Filters
- ICS
- CCS
- J95
- 发布
- 1999-12-30
- 实施
- 2000-06-01
Internal combustion engine oil pump product quality classification
- ICS
- CCS
- J95
- 发布
- 1999-12-30
- 实施
- 2000-06-01
Internal combustion engine - Oil pump - Product reliability management method (internal use)
- ICS
- CCS
- J95
- 发布
- 1999-12-30
- 实施
- 2000-06-01
Product Quality Grading of Oil Radiator for Internal Combustion Engine
- ICS
- CCS
- J95
- 发布
- 1999-12-30
- 实施
- 2000-06-01
Product quality classification of shell-and-tube oil coolers for internal combustion engines
- ICS
- CCS
- J95
- 发布
- 1999-12-30
- 实施
- 2000-06-01
Product Quality Grading of Centrifugal Oil Filters for Internal Combustion Engines
- ICS
- CCS
- J95
- 发布
- 1999-12-30
- 实施
- 2000-06-01
Product quality classification of plate-fin oil cooler cores for internal combustion engines
- ICS
- CCS
- J95
- 发布
- 1999-12-30
- 实施
- 2000-06-01
Quality grading of oil filter assembly for internal combustion engine paper filter element
- ICS
- CCS
- J95
- 发布
- 1999-12-30
- 实施
- 2000-06-01
Product quality classification of internal combustion engine spin-on oil filter
- ICS
- CCS
- J95
- 发布
- 1999-12-30
- 实施
- 2000-06-01
本标准规定了内燃机管壳式机油冷却器的基本要求、传热性能的主要技术指标和必须进行的试验及检验规则等。 本标准适用于与汽车、拖拉机、工程机械、小型船舶和发电机组配套的内燃机用管壳式机油冷却器。
Internal combustion engines.Tube and shell oil coolers.Specifications
- ICS
- CCS
- J95
- 发布
- 1999-09-17
- 实施
- 2000-01-01
本标准规定了内燃机机油泵齿轮的技术要求、检验规则和标志、包装、运输、,贮存。 本标准适用于中小功率内燃机用的钢、球墨铸铁制造的外啮合渐开线齿轮泵的主、被动齿轮。
Internal combustion engines.Gears for lubricating oil pumps.Specifications
- ICS
- CCS
- J95
- 发布
- 1999-09-17
- 实施
- 2000-01-01
本标准规定了内燃机机油泵常用的外啮合渐开线齿轮泵和内啮合摆线齿轮泵及其它容积式机油泵的试验项目、试验条件、试验装置、性能试验规范及试验结果的整理。 本标准适用于内燃机用齿轮泵和转子泵及其它容积式机油泵总成性能试验。
Internal combustion engines.Methods of test for lubrication oil pumps
- ICS
- CCS
- J95
- 发布
- 1999-09-17
- 实施
- 2000-01-01
本标准规定了22～735kW液力驱动的离心式机油滤清器的试验方法。 本标准适用于内燃机用液力驱动的离心式机油滤清器。
Internal combustion engines.Centrifugal lubricating oil filters.Test method
- ICS
- CCS
- J95
- 发布
- 1999-09-17
- 实施
- 2000-01-01
