J95 润滑系统 标准查询与下载
共找到 136 条与 润滑系统 相关的标准，共 10 页
本标准规定了分流离心式机油滤清器系列产品的型号、基本参数、外形尺寸和连接尺寸。 本标准适用于22～735kW（30～1000马力）内燃机用液力驱动的分流离心式机油滤清器。
Split flow centrifugal oil filter parameters
- ICS
- CCS
- J95
- 发布
- 1992-05-28
- 实施
- 1993-01-01
本标准规定了分流离心式机油滤清器的技术要求、检验规则和标志、包装、运输、贮存。 本标准适用于22～735kW（30～1000马力）内燃机用液力驱动的分流离心式机油滤清器。
Specifications for split flow centrifugal oil filter
- ICS
- CCS
- J95
- 发布
- 1992-05-28
- 实施
- 1993-01-01
Specifications for split flow centrifugal oil filter rotor assembly
- ICS
- CCS
- J95
- 发布
- 1992-05-28
- 实施
- 1993-01-01
Internal combustion engine oil pump gear series parameters
- ICS
- CCS
- J95
- 发布
- 1992-05-28
- 实施
- 1993-01-01
本标准规定了内燃机旋装式机油滤清器的主要特征尺寸。 本标准适用于中小功率内燃机用纸质滤芯旋装式机油滤清器。
Internal combustion engine spin-on oil filter serial size
- ICS
- 27.020
- CCS
- J95
- 发布
- 1991-07-01
- 实施
- 1992-07-01
本标准规定了内燃机纸质机油滤芯胶粘剂的基本技术要求、检验方法、检验规则和标志、包装、运输、贮存。 本标准适用于中小功率内燃机纸质机油滤芯纸与金属端盖间胶接的胶粘剂。
Specifications for paper oil filter adhesives for internal combustion engines
- ICS
- CCS
- J95
- 发布
- 1991-07-01
- 实施
- 1992-07-01
本标准规定了内燃机纸质机油滤芯胶接的技术要求和胶接工艺流程。 本标准适用于中小功率内燃机纸质机油滤芯滤纸与金属端盖间的胶接。
Technical specification for bonding process of paper oil filter element of internal combustion engine
- ICS
- CCS
- J95
- 发布
- 1991-07-01
- 实施
- 1992-07-01
本标准规定了内燃机机油泵粉末冶金齿轮的技术要求、检验规则、标志、包装、运输、贮存。 本标准适用于内燃机机油泵粉末冶金外啮合渐开线主、被动齿轮。
Specifications for powder metallurgical gears of internal combustion engine oil pump
- ICS
- CCS
- J95
- 发布
- 1991-07-01
- 实施
- 1992-07-01
本标准规定了内燃机机油泵粉末冶金内、外转子技术要求、检验规则、标志、包装、运输、贮存。 本标准适用于内燃机机油泵粉末冶金内、外转子。
Specifications for powder metallurgical rotors of internal combustion engine oil pumps
- ICS
- CCS
- J95
- 发布
- 1991-07-01
- 实施
- 1992-07-01
本标准规定了内燃机纸质滤芯机油滤清器总成的技术要求、检验规则和标志、包装、运输、贮存。 本标准适用于体积流量在1000L/min以下的内燃机纸质滤芯机油滤清器总成总成。
Specifications for paper filter element oil filter assembly of internal combustion engine
- ICS
- 27.020
- CCS
- J95
- 发布
- 1991-07-01
- 实施
- 1992-07-01
本标准规定了内燃机旋装式机油滤清器的技术要求、检验规则和标志、包装、运输、贮存。 本标准适用于体积流量在50L/min以下的旋装式机油滤清器总成。
Specifications for spin-on oil filter
- ICS
- CCS
- J95
- 发布
- 1991-07-01
- 实施
- 1992-07-01
本标准规定了测试内燃机全流式机油滤清器性能的试验项目、装置、方法和程序，为评价滤清器的性能提供所需要的最低限度资料。如果制造厂与用户双方同意，也可以根据用户要求对试验项目和试验内容作相应变动或分别进行。 本标准适用于体积流量为100L/min以下的内燃机全流式机油滤清器。
Test method for oil filter assembly of paper filter element of internal combustion engine
- ICS
- 27.020
- CCS
- J95
- 发布
- 1991-07
- 实施
- 1992-07-01
Tests their ability to withstand a static pressure objective and to determine their burst pressure and failure mode. Does not apply to filters for use in aeronautical applications.
Full-flow lubricating oil filters for internal combustion engines - Method of test for static burst pressure
- ICS
- 21.260
- CCS
- J95
- 发布
- 1991-03-29
- 实施
- 1991-03-29
A method of testing the constructional integrity to withstand engine or installation vibration.
Full-flow lubricating oil filters for internal combustion engines - Method of test for vibration fatigue
- ICS
- 21.260
- CCS
- J95
- 发布
- 1991-03-29
- 实施
- 1991-03-29
Tests ability to withstand an internal pressure surge such as occurs when an engine is started from cold, and cyclic internal pressure variations experienced during operation.
Full-flow lubricating oil filters for internal combustion engines - Method of test for cold start simulation and hydraulic pulse durability
- ICS
- 21.260
- CCS
- J95
- 发布
- 1991-03-29
- 实施
- 1991-03-29
Internal combustion engines; spin-on filters for lubricating oil; dimensions
- ICS
- 43.060.30
- CCS
- J95
- 发布
- 1990-12
- 实施
- 1990-12-15
Specifies a method of testing the ability of oil filters to withstand an internal pressure surge such as occurs when an engine is started from cold, and cyclic internal pressure variations experienced during operation.
Methods of test for full-flow lubricating oil filters for internal combustion engines; part 5: cold start simulation and hydraulic pulse durability test
- ICS
- 21.260
- CCS
- J95
- 发布
- 1990-12
- 实施
- 1990-12-01
Specifies a method of testing the constructional integrity of oil filters to withstand engine or installation vibration. This test is intended to filters with disposable elements with a maximum flow rate of 100 l/min.
Methods of test for full-flow lubricating oil filters for internal combustion engines; part 7: vibration fatigue test
- ICS
- 21.260
- CCS
- J95
- 发布
- 1990-11
- 实施
- 1990-11-15
Methods of test for full-flow lubricating oil filters for internal combustion engines; part 2: element by-pass component characteristics; technical corrigendum 1
- ICS
- CCS
- J95
- 发布
- 1990-09
- 实施
- 1990-09-01
Methods of test for full-flow lubricating oil filters for internal combustion engines; part 8: inlet anti-drain valve test; technical corrigendum 1
- ICS
- CCS
- J95
- 发布
- 1990-09
- 实施
- 1990-09-01
