K56 燃气轮机及其辅助设备 标准查询与下载

BS ISO 21789:2009 燃气涡轮机应用.安全性

Gas turbine applications - Safety

ISO 21789:2009 燃气轮机设施.安全性

Gas turbine applications - Safety

ASME EA-3-2009 蒸汽系统用能量评估

This Standard covers steam systems that are defined as a system containing steam generator(s) or other steam source(s), a steam distribution network and end-use equipment. Cogeneration and power generation components may also be elements of the system (gas turbines, backpressure steam turbines, condensing steam turbines). If steam condensate is collected and returned, the condensate return subsystem is a part of the steam system. This Standard sets the requirements for conducting and reporting the results of a steam system energy assessment (hereafter referenced as an assessment) that considers the entire system, from energy inputs to the work performed as the result of these inputs. An assessment meeting this standard need not address each individual system component or specific system within an industrial facility with equal weight; however, it shall be sufficiently comprehensive to identify the major opportunities for improving the overall energy performance of the steam system. This Standard is designed to be applied primarily at industrial facilities, but most of the specified procedures can be used in other facilities such as those in the institutional and commercial sectors.

Energy Assessment for Steam Systems

DIN EN ISO 3977-5:2008 燃气轮机.采购.第5部分:石油和天然气工业的应用

This part of ISO 3977 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of packaged gas turbines or use in drilling, production, refining and the transport by pipelines of petroleum and natural gas. It is a pplicable to the procurement of gas turbines and gas turbine systems, including gas turbines for combined cycle systems, and their auxiliaries by a purchaser from a packager. This part of ISO 3977 is not intended to deal with local or national legislative requirements to which the installation may be requied to conform.

Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001); German and English version EN ISO 3977-5:2003

BS ISO 3977-3:2008 燃气轮机.采购.设计要求

Gas turbines - Procurement - Design requirements

HB 7841-2008 燃气轮机增压机组试车方法

本标准规定了燃气轮机增压机组（以下简称机组）验收试车和交付试车的方法。 本标准适用于天然气管道输送机组的交付验收，其他用途机组的交付验收亦可参照使用。

Test method for gas turbine supercharging unit

ANSI/ASME PTC4.4-2008 燃气轮机热回收蒸汽发生机

This document addresses steam generators whose primary function is to recover heat from gas turbine exhaust. Methods noted in this document may also be used for testing other heat recovery units which may include the following: (a) Units heating water only. (b) Units using working fluids other than water. (c) Units obtaining hot gas heat input from sources other than gas turbines. (d) HRSGs with fresh air firing capability. This document does not cover the following testing: (a) Fired steam generators which primary function does not include the recovery of heat from gas turbine exhaust. These are addressed in PTC 4 and PTC 34. (b) Auxiliary equipment such as pumps and fans that are addressed in PTC 8.2 and PTC 11, respectively. (c) Deaerator performance that is addressed in PTC 12.3. (d) Equipment noise emissions that are addressed in PTC 36. (e) Gaseous emissions to atmosphere. (f) Steam purity.

Gas Turbine Heat Recovery Steam Generators

JIS B 8042-3:2007 燃气轮机.采购.第3部分:设计要求

この規格は，ガスタービン及び関連補機，又はコンバインドサイクルプラントを購入者が製造業者から調達しようとするときに必要な設計要求事項について規定する。さらに，この規格は，調達するときに用いる指針及び技術情報も提供する。特別な用途のガスタービンに対する追加的な要求事項は，この規格群の第5部に規定する。

Gas turbines -- Procurement -- Part 3: Design requirements

JIS B 8045:2006 燃气轮机.燃气轮机装置用数据采集和趋势监控系统要求

この規格は，ガスタービン装置及び附属装置に使用する状態監視装置(データ収集装置及び傾向監視装置)について規定する。この規格では，監視装置及び関連する技術用語を分類し，定義する。さらに，それぞれの監視装置の特徴及び性能を比較できるように，測定値の変換及び妥当性検証の方法についても規定する。

Gas turbines -- Data acquisition and trend monitoring system requirements for gas turbine installations

ASME PTC 47-2006 整体气化联合循环发电厂

This Code covers a defined range of primary fuel characteristics, but is limited to combined-cycle, power-generation systems using gas and steam turbines. This Code defines the boundaries of the overall IGCC power plant to encompass three major plant sections--the air separation unit (ASU, for oxygen-blown gasifiers or plants that use nitrogen), the gasification process (including gas cleanup), and the power block. Tests conducted by this Code determine the quantity and quality of fuel gas by its flow rate, temperature, pressure, composition, heating value, and its content of contaminants. Contaminants are compounds that are potentially deleterious to the gas turbine and power block in general, or are precursors to stack emissions. Contaminants to be measured are sodium (Na), potassium (K), vanadium (V), lead (Pb), calcium (Ca), barium (Ba), manganese (Mn), phosphorus (P), sulfur compounds (H2S and COS), nitrogen compounds (HCN and NH3), chlorine compound (HCI), and particulate matter. Recommendations are included for the following in pretest agreements: testing procedures, types of instruments, methods of measurement, method of calculation, and contents of test report. Regulatory compliance testing of IGCC power plants is not covered by this Code.

Integrated Gasification Combined Cycle Power Generation Plants

ASME TDP-1-2006 发电站用防水渍蒸汽涡轮机的推荐实施规程:矿物燃料设备

This Standard provides recommended practices for the prevention of water damage to steam turbines used in fossil-fuel-fired electrical power generation. The practices address damage due to water, wet steam, and steam backflow into a steam turbine. The practices are applicable to conventional steam cycle, combined cycle and cogeneration plants. The practices cover design, operation, inspection, testing, and maintenance of those aspects of the following power plant systems and equipment concerned with preventing the induction of water into steam turbines and associated systems and equipment: (a) motive steam systems; (b) steam attemperation systems; (c) turbine extraction/ admission systems; (d) feedwater heaters; (e) turbine drain system; (f) turbine steam seal system; (g) start-up systems; (h) condenser steam and water dumps; (i) steam generator sources. Any connection to the turbine is a potential source of water either by induction from external equipment or by accumulation of condensed steam. The sources treated herein specifically are those found to be most frequently involved in causing damage to turbines. Although water induction into the high and intermediate pressure turbines have historically been recognized as the most damaging, experience has shown that water induction in low pressure turbines can cause significant damage.

Recommended Practices for Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Fossil-Fuel Plants

JIS B 0128:2005 火力发电厂术语汇编.燃气轮机和辅助设备

この規格は，火力発電で用ぃられるガスタービン及び附属装置に関する用語，及びその定義について規宇する。

Glossary of terms for thermal power plants -- Gas turbine and auxiliary equipment

BS ISO 19860:2005 燃气轮机.燃气轮机装置的数据获取和趋势监控系统要求

ISO 19860:2005 applies to data-acquisition and trend-monitoring systems for gas turbine installations and associated systems. ISO 19860:2005 classifies and defines monitoring systems and their technical terms and establishes a system for conversion and validation of measured quantities in order to enable a comparison of the various systems, their features and their performances.

Gas turbines - Data acquisition and trend monitoring system requirements for gas turbine installations

KS B ISO 3977-3:2005 燃气轮机.采购.第3部分:设计要求

이 규격은 패키지 공급자로부터 구매자가 복합 화력 시스템 및 관련 보조 기기를 포함한 가스

Gas turbines-Procurement-Part 3:Design requirements

KS B ISO 3977-5:2005 燃气轮机.采购.第5部分:在石油和天然气工业中的应用

이 규격은 석유 및 천연가스의 채굴, 생산, 정제, 파이프를 통한 운송에 사용되는 통합된

Gas turbines-Procurement-Part 5:Applications for petroleum and natural gas industries

JIS B 8040:2005 燃气轮机.词汇

この規格は，ガスタービンにおいて用途全般，すなわち産業用，石油ガス工業用，船舶用，分散形エネルギーシステム用，コンバインドサイクル及びコージェネレーション用，非常用その他で使用される発電用，機械駆動用などのガスタービンー般に用いる基本的な用語について規定する。

Gas turbines -- Vocabulary

ISO 19860:2005 燃气轮机.燃气轮机装置的数据获取和趋势监控系统要求

This International Standard applies to data-acquisition and trend-monitoring systems for gas turbine installations and associated systems. It classifies and defines monitoring systems and their technical terms. It establishes a system for conversion and validation of measured quantities in order to enable a comparison of the various systems, their features and their performances.

Gas turbines - Data acquisition and trend monitoring system requirements for gas turbine installations

ASME PTC 22-2005 燃气涡轮机的性能试验规则

This Code provides directions and rules for conduct and report of results of thermal performances tests for open cycle gas turbine power plants and gas turbine engines, hereafter referred to as gas turbines. The object is to determine the thermal performance of the gas turbine when operating at test conditions, and correcting these test results to specified reference conditions. This Code provides explicit procedures for the determination of correct power output, corrected heat rate (efficiency), corrected exhaust flow, energy, and temperature. Tests may be designated to satisfy different goals, including absolute performance and comparative performance. It is the intent of the Code to provide results with the highest level of accuracy consistent with the best engineering knowledge and practice in the gas turbine industry. In planning the test, an uncertainty analysis must demonstrate that the proposed instrumentation and measurement techniques meet the requirements of the Code.

Performance Test Code on Gas Turbines

ANSI/ASME PTC22-2005 燃气轮机的性能试验规程

Provides for the testing of gas turbines supplied with gaseous or liquid fuels (or solid fuels converted to liquid or gas prior to entrance to the gas turbine). Tests of gas turbines with emission control and/or power augmentation devices, such as injection fluids and inlet air treatment, are included. It may be applied to gas turbines in combined cycle plants or with other heat recovery systems. This Code provides for comparative (back to back) tests designed to verify performance differentials of the gas turbine, primarily for testing before and after modifications, up rates, or overhauls.

Performance Test Code on Gas Turbines

KS B ISO 3977-9:2004 燃气轮机.采购.第9部分:可靠度、有效性、可维护性及安全

이 규격은 가스 터빈의 제작자와 사용자, 컨설턴트, 규제 기관, 보험 회사, 그 외 관련자

Gas turbines－Procurement－Part 9：Reliability, availability, maintainability and safety