K60 电气设备与器具综合 标准查询与下载

IEC 61010-2-201:2013 测量、控制和实验室用电气设备的安全性要求.第2-201部分:控制设备的详细要求

Scope and object This clause of Part 1 is applicable@ except as follows. Equipment included in scope This part of IEC 61010 specifies safety requirements and related verification tests for control equipment of the following types: ?C Programmable controllers (PLC and PAC); ?C the components of Distributed Control Systems (DCS); ?C the components of remote I/O ?C systems; - industrial PC (computers) and Programming and Debugging Tools (PADTs); ?C Human-Machine Interfaces (HMI); ?C any product performing the function of control equipment and/or their associated peripherals@ which have as their intended use the control and command of machines@ automated manufacturing and industrial processes@ e.g. discrete and continuous control. Components of the above named equipment and in the scope of this standard are: ?C (auxiliary) stand-alone power supplies; ?C peripherals such as digital and analogue I/O@ remote-I/O; ?C industrial network equipment. Control equipment and their associated peripherals are intended to be used in an industrial environment and may be provided as open or enclosed equipment. NOTE 1 Control equipment intended also for use in other environments or for other purposes (example; for use in building installations to control light or other electrical installations@ or for use on cars@ trains or ships) can have additional conformity requirements defined by the safety standard(s) for these applications. These requirements can involve as example: insulation@ spacings and power restrictions. NOTE 2 Computing devices and similar equipment within the scope of IEC 60950 (planned to be replaced by IEC 62368) and conforming to its requirements are considered to be suitable for use with control equipment within the scope of this standard. However@ some of the requirements of IEC 60950 for resistance to moisture and liquids are less stringent than those in IEC 61010-1:2010@ 5.4.4 second paragraph. Control equipment covered in this standard is intended for use in overvoltage category II (IEC 60664-1) in low-voltage installations@ where the rated equipment supply voltage does not exceed a.c. 1 000 V r.m.s. (50/60 Hz)@ or d.c. 1 500 V. NOTE 3 If equipment in the scope of this part is applied to overvoltage category III and IV installations@ then the requirements of Annex K of Part 1 apply. The requirements of ISO/IEC Guide 51 and IEC Guide 104@ as they relate to this Part@ are incorporated herein.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment

KS C IEC 60359:2013 电器电子测量设备.性能的表现

이 표준은 다음과 같은 종류의 주로 산업용 전기 및 전자 장비의 성능 명세에 적용한다.

Electrical and electronic measurement equipment－Expression of performance

KS C IEC 60624:2013 脉冲发生器性能的表现

이 표준은 펄스 발전기 사양과 발전기와 같이 사용되는 액세서리에 적용된다. 이 표준이 적용

Expression of the performance of pulse generators

KS C IEC 61143-1:2013 电测仪表.X-t记录仪.第1部分:定义及要求事项

이 표준은 아날로그 전기량인 전압과 전류를 시간 함수로 측정하고 기록하기 위해 사용하는 X

Electrical measuring instruments－X-t recorders－Part 1：Definitions and requirements

KS C IEC 60469-2:2013 脉冲技术和装置.第2部分:脉冲的测量·分析及一般事项

이 표준은 시간영역 펄스 측정의 기법과 절차에 대한 정의와 설명을 제시한다. 제시되는 정의

Pulse techniques and apparatus－Part 2：Pulse measurement and analysis, general considerations

KS C IEC 61554:2013 盘装式设备.电测仪表.盘装尺寸

이 표준은 장비를 패널에 장착하기 위한 치수 체계에 대하여 규정한다. 이 표준은 전기 및

Panel mounted equipment-Electrical measuring instruments-Dimensions for panel mounting

KS C IEC 61187:2013 电气及电子测定装备.文档

이 표준은 시험실에서 사용하기 위한 전기 및 전자 측정장비에 제공되는 기술문서에 적용한다.

Electrical and electronic measuring equipment－Documentation

KS C IEC 61143-2:2013 电测仪表.X-t记录仪.第2部分:推荐补充试验方法

제1부를 참조한다.

Electrical measuring instruments-X-t recorders-Part 2:Recommended additional test methods

KS C IEC 61028:2013 电测量仪表.X-Y记录仪

이 표준은 아날로그 전기 신호를 기록하기 위해 사용되는 X-Y 기록계에 적용한다.이

Electrical measuring instruments－X-Y recorders

KS C IEC 60386:2013 录音和重放设备速度波动的测量方法

이 표준은 청감 보정 피크값법을 이용한 측정 방법에 대하여 적용한다.

Method of measurement of speed fluctuations in sound recording and reproducing equipment

KS C IEC 61290-6-1:2013 光纤放大器.基本规范.第6-1部分:泵浦泄漏参数的试验方法.光信号分离器

이 표준은 현재 상용화되어 있는 희토류가 첨가된 액티브 광섬유를 사용한 광섬유 증폭기(OF

Optical fiber amplifiers－Basic specification－Part 6-1：Test methods for pump leakage parameters－Optical demultiplexer

ANSI/BHMA A156.31-2013 装有撞针和框架的电气制动器

Electric Strikes and Frame Mounted Actuators

IEC 61496-2:2013 机械安全性.电敏保护设备.第2部分:使用有源光电子保护器件设备(AOPDs)的详细要求

This clause of Part 1 is replaced by the following: This part of IEC 61496 specifies requirements for the design@ construction and testing of electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety-related system@ employing active opto-electronic protective devices (AOPDs) for the sensing function. Special attention is directed to features which ensure that an appropriate safety-related performance is achieved. An ESPE may include optional safetyrelated functions@ the requirements for which are given in Annex A of IEC 61946-1:2012 and of this part. This part of IEC 61496 does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application@ nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. Excluded from this part are AOPDs employing radiation at wavelengths outside the range 400 nm to 1500 nm. This part of IEC 61496 may be relevant to applications other than those for the protection of persons@ for example@ the protection of machinery or products from mechanical damage. In those applications@ additional requirements may be necessary@ for example@ when the materials that are to be recognized by the sensing function have different properties from those of persons. This part does of IEC 61496 not deal with EMC emission requirements.

Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)

BS EN 61010-2-032:2012 测量, 控制和实验室用电气设备的安全要求. 电气测量及试验用手持电流接线端子的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

KS C 8336-2012 自动调温器

이 표준은 단상 교류로 정격 전압 300 V 이하, 정격 소비 전력이 100 W를 초과 2

automatic control for thermostat

DB41/T 747-2012 电梯上行超速保护装置检验规程

Inspection rules for elevator upward overspeed protection device

DB41/T 748-2012 电梯安装改造重大维修施工方案编写 规范

Specifications for the preparation of major maintenance and construction plans for elevator installation and transformation

UL 61010-2-030-2012 测量,控制和实验室用电气设备的安全性要求.第2-030部分:试验和测量电路的详细要求

UL Standard for Safety Safety requirements for electrical equipment for measurement@ control@ and laboratory use �C Part 2-030: Particular requirements for testing and measuring circuits (First Edition; Reprint with revisions through and including Septemb

UL 61010-2-030 (ND)-2012 测量, 控制和实验室用电气设备UL 61010-030安全性要求的国家差异. 第2-030部分: 电路测量和试验用特殊要求

National Differences For Safety requirements for electrical equipment for measurement@ control@ and laboratory use �C Part 2-030: Particular requirements for testing and measuring circuits (First Edition; Reprint with revisions through and including Septe

BS IEC 61892-2:2012 移动式及固定式近海装置.电气设施.系统设计

Mobile and fixed offshore units. Electrical installations. System design