K74 灯具附件 标准查询与下载

JIS C 7709-3 AMD 10:2016 互换性和安全控制用带量规的灯头和灯座.第3部分:量规(修改件10)

Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 10)

JIS C 8109:2016 霓虹灯变压器

Luminous-tube transformers

DIN EN 61048:2016 灯具辅件.管状荧光灯和其他放电灯电路用电容器.一般安全性要求(IEC 61048-2006+A1-2015).德文版本EN 61048-2006+A1-2016

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements (IEC 61048:2006 + A1:2015); German version EN 61048:2006 + A1:2016

DIN 34827:2016 内六角螺钉

Hexalobular socket set screws

DIN EN 62386-102:2016 数字可寻址照明接口.第102部分:一般要求.控制装置(IEC 62386-102-2014).英文版本EN 62386-102-2014

Digital addressable lighting interface - Part 102: General requirements - Control gear (IEC 62386-102:2014); English version EN 62386-102:2014

DIN EN 62386-103:2016 数字可寻址照明接口.第103部分:一般要求.控制装置(IEC 62386-103-2014).英文版本EN 62386-103-2014

Digital addressable lighting interface - Part 103: General requirements - Control devices (IEC 62386-103:2014); English version EN 62386-103:2014

IEC 60238:2016 爱迪森螺纹灯座

This International Standard applies to lampholders with Edison thread E14@ E27 and E40@ designed for connection to the supply of lamps and semi-luminaires1 only. It also applies to switched-lampholders for use in AC circuits only@ where the working voltage does not exceed 250 V r.m.s. This standard also applies to lampholders with Edison thread E5 designed for connection to the supply mains of series connected lamps@ with a working voltage not exceeding 25 V@ to be used indoors@ and to lampholders with Edison thread E10 designed for connection to the supply mains of series connected lamps@ with a working voltage not exceeding 60 V@ to be used indoors or outdoors. It also applies to lampholders E10 for building-in@ for the connection of single lamps to the supply. These lampholders are not intended for retail sale. As far as it reasonably applies@ this standard also covers lampholders other than lampholders with Edison thread designed for connection of series-connected lamps to the supply. NOTE This type of lampholder is for example used in Christmas tree lighting chains. As far as it reasonably applies@ this standard also covers adapters. This standard also covers lampholders which are@ wholly or partly@ integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only. For all other requirements@ such as protection against electric shock in the area of the terminals or of the lamp cap@ the requirements of the relevant appliance standard are observed and tested after building into the appropriate equipment@ when that equipment is tested according to its own standard. Such lampholders as well as lampholders provided with a snap-on outer shell@ for use by luminaire manufacturers only@ are not for retail sale. This standard applies to lampholders to be used indoors or outdoors in residential as well as in industrial lighting installations. It also applies to candle lampholders. In locations where special conditions prevail@ as for street lighting@ on board ships@ in vehicles and in hazardous locations@ for example where explosions are liable to occur@ special constructions may be required. This standard does not apply to three-light lampholders E26d. This standard is based on the following data relative to lamps for general lighting service: ?C caps E14 are used for lamps with a current not exceeding 2 A; ?C caps E27 are used for lamps with a current not exceeding 4 A; ?C caps E40 are used for lamps with a current not exceeding 16 A@ or 32 A if the nominal voltage of the supply does not exceed 130 V (see 5.5 and 6.3). Where lampholders are used in luminaires@ their maximum operating temperatures are specified in IEC 60598. 1 Requirements for lampholders suitable for semi-luminaires are under consideration.

Edison screw lampholders

IEC 60838-1:2016 杂类灯座.第1部分:一般要求和试验

This part of IEC 60838 applies to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in Annex A) and the methods of test to be used in determining the safe use of lamps in lampholders. This part of IEC 60838 also covers lampholders which are integral with a luminaire. It covers the requirements for the lampholder only. This part of IEC 60838 also covers lampholders integrated in an outer shell and dome similar to Edison screw lampholders. Such lampholders are further tested in accordance with the relevant clauses of IEC 60238. Requirements for lampholders for tubular fluorescent lamps, Edison screw lampholders and bayonet lampholders are covered by separate standards.

Miscellaneous lampholders - Part 1: General requirements and tests

DIN EN 62386-209 Berichtigung 1:2016 数字可寻址照明接口 第209部分：控制齿轮的特殊要求 色彩控制 (设备类型8) (IEC 62386-209-2011) 德文版本EN 62386-209-2011

Digital addressable lighting interface - Part 209: Particular requirements for control gear - Colour control (device type 8) (IEC 62386-209:2011); German version EN 62386-209:2011, with CD-ROM, Corrigendum to DIN EN 62386-209 (VDE 0712-0-209):2012-10

QB/T 2511-2016 单端金属卤化物灯(钪钠系列)用LC顶峰超前式镇流器 性能要求

本标准规定了1 000 V以下、50 Hz交流供电的单端金属卤化物灯（钪钠系列）用LC顶峰超前式镇流器的术语和定义、分类和命名、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于GB/T 18661规定的175 W、250 W、360 W、400 W、1 000 W、1 500 W单端钪钠系列金属卤化物灯（脉冲启动类型不适用）用LC顶峰超前式镇流器（以下简称“镇流器”）。

Single-ended metal halide lamps (ScI3-NaI series) with LC peak lead ballasts.Performance requirements

JIS C 8302:2015 圆螺纹灯座

Edison screw lampholder adapters and branch sockets

JIS C 8120:2015 管形荧光灯用交流和/或直流供电的电子控制装置. 性能要求

AC and/or DC-supplied electronic control gear for tubular fluorescent lamps -- Performance requirements

IEC TS 62257-12-1:2015 农村电气化使用可再生能源和混合动力系统的建议. 第12-1部分: 离网型电力系统用灯具和照明期间的选择

This part of IEC 62257 establishes the framework for creating a product specification - the basis for evaluating quality for a particular context. Product specifications include minimum requirements for quality standards, warranty requirements, and/or performance criteria. Products are compared to specifications based on test results and other information about the product. The product specification framework is flexible and can accommodate the goals of diverse organizations and institutions. This part of IEC 62257 applies to lamps and lighting appliances for off-grid electricity systems that have the following characteristics: The power supply is AC or DC; AC nominal voltages up to 250 V; DC nominal voltages up to 48 V; The light source is CFL, linear fluorescent, or LED; Operation of the lamp or lighting appliance does not require any components to be supplied by the testing laboratory other than lampholders, wire, connectors, and a power supply; The lamp or lighting appliance does not include a battery or energy source (for example, a photovoltaic module or electromechanical generator). Luminaires are included in the definition of "lighting appliances" if packaged together with a lamp intended to be used with the luminaire. Luminaires without lamps are not included in the scope of this part of IEC 62257.

Recommendations for renewable energy and hybrid systems for rural electrification - Part 12-1: Selection of lamps and lighting appliances for off-grid electricity systems

IEC 60929:2015 管形荧光灯用交流和/或直流电子镇流器.性能要求

This international Standard specifies performance requirements for electronic control gear for use on a.c. at 50 Hz or 60 Hz and/or d.c. supplies, both up to 1000 V, with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation. NOTE 1 Tests in this standard are type tests. Requirements for testing individual control gear during production are not included. NOTE 2 There are regional standards regarding the regulation of mains current harmonics and immunity for end-products like luminaires and independent control gear. In a luminaire, the control gear is dominant in this respect. Control gear, together with other components, should comply with these standards. NOTE 3 Requirements for the digital addressable lighting interface of electronic control gear are given in IEC 62386.

AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements

BS EN 62756-1:2015 数字负载端传输照明控制. 基本要求

Digital load side transmission lighting control. Basic requirements

BS EN 62386-201:2015 数字可寻址照明接口 控制装置的特殊要求 荧光灯（设备类型 0）

Digital addressable lighting interface. Particular requirements for control gear. Fluorescent lamps (device type 0)

BS EN 62733:2015 电子灯控制装置的可编程元件. 总则和安全要求

Programmable components in electronic lamp controlgear. General and safety requirements

JIS C 7709-2 AMD 9:2015 互换性和安全控制用带量规的灯头和灯座.第2部分:灯座(修改件9)

Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 9)

JIS C 7709-3 AMD 9:2015 互换性和安全控制用带量规的灯头和灯座.第3部分:量规(修改件9)

Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 9)

JIS C 7709-1 AMD 9:2015 互换性和安全控制用带量规的灯头和灯座.第1部分:灯头(修改件9)

Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 9)