K74 灯具附件 标准查询与下载

JIS C 7709-3 AMD 8:2014 互换性和安全控制用带量规的灯头和灯座.第3部分:量规(修改件8)

Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 8)

JIS C 7709-1 AMD 8:2014 互换性和安全控制用带量规的灯头和灯座.第1部分:灯头(修改件8)

Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 8)

JIS C 8147-2-7:2014 灯具控制装置. 第2-7部分: 应急照明用电池供电的电子控制器的特殊要求

Lamp controlgear -- Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting

DIN EN 61347-2-1:2014 灯控装置.第2-1部分:起动装置(辉光起动器除外)的特殊要求(IEC 61347-2-1-2000+A1-2005+A2-2013); 德文版本EN 61347-2-1-2001+Corrigendum July 2003+A1-2006+Corrigendum November 2006+Corrigendum December 2010+A2-2014

Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters) (IEC 61347-2-1:2000 + A1:2005 + A2:2013); German version EN 61347-2-1:2001 + Corrigendum July 2003 + A1:2006 + Corrigendum November 2006 + Corrigendum Dec

IEC 62386-102:2014 数字可寻址照明接口.第102部分:一般要求.控制装置

This Part of IEC 62386 is applicable to control gear in a bus system for control by digital signals of electronic lighting equipment. This electronic lighting equipment should be in line with the requirments of IEC 61347@ with the addition of d.c. supplies. NOTE Tests in this standard are type tests. Requirements for testing individual control gear during production are not included.

Digital addressable lighting interface - Part 102: General requirements - Control gear

IEC 60598-2-20:2014 灯具.第2-20部分:详细要求.灯饰串

"This part of IEC 60598 specifies requirements for lighting chains fitted with series@ parallel or a combination of series/parallel connected light sources for use either indoors or outdoors on supply voltages not exceeding 250 V. For combinations where rope lights (also known as sealed lighting chains) are included@ see IEC 60598-2-21. Lighting chains provided with fixed or detachable attachments e.g. ornamental or decorative@ are considered to be covered by this standard. For lighting chains fitted with lampholders of the push-in type@ the appropriate requirements of this standard applies. NOTE 1 A Christmas tree lighting chain is an example of a lighting chain fitted with series or series/parallel connected lamps. A chain for illuminating ski-tracks or promenades is an example of a lighting chain fitted with parallel connected lamps. For lighting chains with non-standardised lamps (e.g. lamps of the push-in type) the lamps are regarded as a part of the lighting chain and consequently included in the testing. NOTE 2 For products where the lighting chain is permanently fixed to a frame or pre-lit Christmas tree the relevant clauses of IEC 60598-2-4 and/or IEC 60598-2-7 can also apply. NOTE 3 In some countries the term ""strings"" is used instead of ""chains"". NOTE 4 Candlestick luminaries are tested according to IEC 60598-2-4."

Luminaires - Part 2-20: Particular requirements - Lighting chains

BS EN 61347-2-13:2014 灯控装置.发光二极管交直流供电控制装置的详细要求

Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

IEC 61347-2-13:2014 灯控装置.第2-13部分:发光二极管交直流供电控制设施的特殊要求

"This part of IEC 61347 specifies particular safety requirements for electronic controlgear for use on d.c. or a.c. supplies up to 1 000 V (a.c. at 50 Hz or 60 Hz) and at an output frequency which can deviate from the supply frequency@ associated with LED modules. Controlgear for LED modules specified in this standard are designed to provide constant voltage or current at SELV or higher voltages. Deviations from the pure voltage and current types do not exclude the gear from this standard. The annexes of IEC 61347-1 which are applicable according to this Part 2-13 and using the word ""lamp"" are understood to also comprise LED modules. Particular requirements for SELV controlgear are given in Annex I. Performance requirements are covered by IEC 62384. Plug-in controlgear@ being part of the luminaire@ are covered as for built-in controlgear by the additional requirements of the luminaire standard."

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

KS C IEC 60061-4:2014 灯头、灯座及检验其安全性和互换性的量规.第4部分:导则及通用信息

호환성 및 안전성 제어를 위한 게이지 및 램프 캡과 소켓-제4부:지침 및 일반 정보

Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 4: Guidelines and general information

UL 1993 CRD-2014 自镇流灯和灯适配器的UL安全标准. 节/段落参考: 补充件SD (新) 主题: 评估LED灯作为特定高强度放电 (HID) 灯的直接替代物的要求 (第四版: 2012年12月4日)

UL Standard for Safety Self-Ballasted Lamps and Lamp Adapters - Section / Paragraph Reference: Supplement SD (New) Subject: Requirements for evaluating LED lamps as direct replacements for specific high intensity discharge (HID) lamps (Edition 4: December

GOST IEC 61347-2-9-2014 灯具控制装置. 第2-9部分. 放电灯 (不包括荧光灯) 用电磁控制装置的特殊要求

Lamp controlgear. Part 2-9. Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)

GOST IEC 60838-2-1-2014 杂类灯座. 第2-1部分. 对灯座S14的特殊要求

Miscellaneous lampholders. Part 2-1. Particular requirements to lampholders S14

GOST IEC 60061-1-2014 互换性和安全性控制用量规及光源用灯头和灯座. 第1部分. 灯帽

Lamp caps and holders for light sources together with gauges for the control of interchangeability and safety. Part 1. Lamp cap

GOST IEC 60061-4-2014 互换性和安全性控制用量规及光源用灯头和灯座. 第4部分. 指南和通用信息

Lamp caps and holders for light sources together with gauges for the control of interchangeability and safety. Part 4. Guidelines and general information

JIS C 7709-2 AMD 7 R:2013 互换性和安全控制用带量规的灯头和灯座.第2部分:灯座(修改件7)

Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 7)

JIS C 7709-1 AMD 7 R:2013 互换性和安全控制用带量规的灯头和灯座.第1部分:灯头(修改件7)

Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 7)

JIS C 7709-3 AMD 7 R:2013 互换性和安全控制用带量规的灯头和灯座.第3部分:量规(修改件7)

Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 7)

SN/T 1588.12-2013 进口灯具检验规程 第12部分:螺口灯座

SN/T 1588的本部分规定了进出口螺口灯座的要求、检验及判定。本部分适用于只供灯及半灯具与电源连接时使用的E14、E27和E40型爱迪生螺口灯座,E12、E26和E39型爱迪生螺口灯座也可参照使用。本部分亦适用于只在工作电压不超过250 V(有效值)的交流电路中使用的开关式灯座。本部分亦适用于工作电压不超过25 V,串联连接户内使用的E5型螺口灯座;工作电压不超过60 V,串联连接户内、户外使用的E10型螺口灯座;以及嵌装式单独与电源连接的E10型螺口灯座。这些灯座均不应零售。本部分还适用于与电源串联连接的非爱迪生螺口灯座,例如用于圣诞照明线路中的灯座。本部分还适用于那些与灯具完全或部分结为一体的灯座,以及那些规定安装在设备之内的灯座。这些灯座不应零售。本部分适用于安装在室内、室外、住宅照明装置及工业照明设备上的灯座,也适用于烛型灯座。本部分不适用于三个光源灯座E26d。

Rules for the inspection of luminaires for import and export.Part 12:Screw lampholds

UL 496 TGD-2013 灯座的UL安全标准. 节/段落参考: 条款1.1主题: 在根据OLFB2和OLFB8评估认证用固态 (LED) 基础支座和连接器时应当使用的标准指南 (第十三版: 2008年9月30日)

UL Standard for Safety Lampholders - Section / Paragraph Reference: Clause 1.1 Subject: Guidance on which standard to apply when evaluating Solid-state (LED) bases holders and connectors for certification under OLFB2 and OLFB8 (Edition 13: September 30, 2

QB/T 2049.1-2013 灯用玻壳 A型玻壳尺寸系列

本部分规定了A型灯用玻壳外形及主要尺寸系列。

Glass bulb dimensions for lamps.A series shapes