L05 可靠性和可维护性 标准查询与下载

IEC 60300-3-1:2003 可信性管理.第3-1部分:应用指南.可信性技术分析:方法指南

Gives a general overview of commonly used dependability analysis techniques. It describes the usual methodologies, their advantages and disadvantages, data input and other conditions for using various techniques. It is an introduction to selected methodo

Dependability management - Part 3-1: Application guide; Analysis techniques for dependability; Guide on methodology

IEEE 1413.1-2002 基于IEEE 1413的可靠性预测的选择和使用指南

Focuses on hardware reliability prediction methodologies for electronic systems and equipment, and specifically excludes software reliability, availability and maintainability, human reliability, and proprietary reliability prediction data and methodologies.

Guide for Selecting and Using Reliability Predictions Based on IEEE 1413

DIN EN 61703:2002 可靠性、有效性、可维修性和维修支持术语的数学表示法 (IEC 61703:2001); 德文版本 EN 61703:2002

The document provides mathematical expressions for reliability, availability, maintainability and maintenance support measures defined in IEC 60050-191. The following classes of items are considered: non-repaired items with zero time to restoration, repaired items with zero time to restoration, and repaired items with non-zero time to restoration.

Mathematical expressions for reliability, availability, maintainability and maintenance support terms (IEC 61703:2001); German version EN 61703:2002

KS A IEC 61078:2002 可靠性分析技法.可靠性方块图(RBD)法

이 규격은 시스템의 신인성을 모형화하는 절차와 신뢰성 및 가용성의 척도 계산을 위하여 모형

Analysis techniques for dependability－Reliability block diagram method

DIN IEC 60605-4:2002 设备可靠性试验.第4部分:指数分布的统计规程.点估计、置信区间、预测区间、容差区间

Equipment reliability testing - Part 4: Statistical procedures for exponential distribution; Point estimates, confidence intervals, prediction intervals and tolerance intervals (IEC 60605-4:2001)

NF C01-191/A2:2002 电工词汇.第191章:可靠性和服务质量

Electrotechnical Vocabulary - Chapter 191 : dependability and quality of service.

NF C20-344:2002 可靠性、有效性、可维护性和保养支持术语的数学表达式

Mathematical expressions for reliability, availability, maintainability and maintenance support terms.

IEC 60300-3-12:2001 可信性管理 第3-12部分：应用指南 综合逻辑支持

This part of IEC 60300-3 is an application guide intended for use by a wide range of suppliers including large and small companies wishing to offer a competitive and quality product which is optimized for the purchaser and supplier for the complete product life cycle. This standard can be applied to both commercial and military products. It describes the process of ILS, and the various minimal common practices and logistic data analyses that should be undertaken to meet this objective.

Dependability management - Part 3-12: Application guide; Integrated logistic support

BS EN 61703:2001 可靠性、可用性、可维护性和维修支持术语的数学表示法

This International Standard provides mathematical expressions for reliability, availability, maintainability and maintenance support measures defined in IEC 60050-191. The following classes of items are considered separately in this standard: – non-repaired items; – repaired items with zero time to restoration; – repaired items with non-zero time to restoration. In order to keep the mathematical formulae as simple as possible, the following basic mathematical models are used to quantify dependability measures: – random variable (time to failure) for non-repaired items; – simple (ordinary) renewal process for repaired items with zero time to restoration; – simple (ordinary) alternating renewal process for repaired items with non-zero time to restoration. To facilitate location of the full definition, the IEC 60050-191 reference for each term is shown (in parenthesis) immediately following each term, for example: mean time to restoration [191-13-08] The application of each dependability measure is illustrated by means of a simple example. NOTE This standard is mainly applicable to hardware dependability, but many terms and their definitions may be applied to items containing software. Some of the software dependability aspects are explained in annex D.

Mathematical expressions for reliability, availability, maintainability and maintenance support terms

IEC 61703:2001 可靠性、可用性、维护性和维护支持术语的数学表示式

This International Standard provides mathematical expressions for reliability, availability, maintainability and maintenance support measures defined in IEC 60050-191. The following classes of items are considered separately in this standard: - non-repaired items; - repaired items with zero time to restoration; - repaired items with non-zero time to restoration. In order to keep the mathematical formulae as simple as possible, the following basic mathematical models are used to quantify dependability measures: - random variable (time to failure) for non-repaired items; - simple (ordinary) renewal process for repaired items with zero time to restoration; - simple (ordinary) alternating renewal process for repaired items with non-zero time to restoration. To facilitate location of the full definition, the IEC 60050-191 reference for each term is shown (in parenthesis) immediately following each term, for example: mean time to restoration [191-13-08] The application of each dependability measure is illustrated by means of a simple example. NOTE This standard is mainly applicable to hardware dependability, but many terms and their definitions may be applied to items containing software. Some of the software dependability aspects are explained in annex D.

Mathematical expressions for reliability, availability, maintainability and maintenance support terms

BS IEC 60605-4:2001 设备可靠性检验.指数分配的统计方法.点估计、置信区间、预期数值变化范围和公差范围

This International Standard provides statistical methods for evaluating point estimates, confidence intervals, prediction intervals and tolerance intervals for the failure rate of items, whose time to failure follows an exponential distribution. This implies that the failure rate (see IEV 191-12-02) is constant with respect to time. It should be noted that although reference is made above to failure rate, the numerical methods to be described are equally applicable to other event rates provided the times to the occurrence of the event follow an exponential distribution. Thus, with this qualification, the numerical methods will apply, for example, to constant failure intensities and constant repair rates (see IEV 191-12-04 and IEV 191-13-02 respectively). For convenience, however, and to avoid unnecessary repetition, reference will be made in what follows only to failures and failure rates. Use of the procedures in this standard should be supported by tests to confirm the validity of the assumption of constant failure rate or failure intensity (see IEC 60605-6). This standard is also applicable whenever a random sample of items is subjected to a test of times to failure for the purpose of estimating measures of reliability performance.

Equipment reliability testing - Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals

IEC 60605-4:2001 设备可靠性试验 第4部分：指数分布的统计规程 点估计，置信区间，预测区间，容差区间

This International Standard provides statistical methods for evaluating point estimates, confidence intervals, prediction intervals and tolerance intervals for the failure rate of items, whose time to failure follows an exponential distribution. This implies that the failure rate (see IEV 191-12-02) is constant with respect to time. It should be noted that although reference is made above to failure rate, the numerical methods to be described are equally applicable to other event rates provided the times to the occurrence of the event follow an exponential distribution. Thus, with this qualification, the numerical methods will apply, for example, to constant failure intensities and constant repair rates (see IEV 191-12-04 and IEV 191-13-02 respectively). For convenience, however, and to avoid unnecessary repetition, reference will be made in what follows only to failures and failure rates. Use of the procedures in this standard should be supported by tests to confirm the validity of the assumption of constant failure rate or failure intensity (see IEC 60605-6). This standard is also applicable whenever a random sample of items is subjected to a test of times to failure for the purpose of estimating measures of reliability performance.

Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals

BS IEC 60300-3-5:2001 可靠性管理.应用指南.可靠性试验条件和统计试验原则

This part of IEC 60300 provides guidelines for the planning and performing of reliability tests and the use of statistical methods to analyse test data. It describes the tests related to repaired and non-repaired items together with tests for constant and non-constant failure intensity and constant and non-constant failure rate. It is applicable: - when reliability testing is called for in a contract, either specifically or by inference; - when planning a reliability test; - during a reliability test; - when analysing data from and reporting on the outcome of a reliability test. This standard also applies when a contract or test plan specifies the use of IEC statistical standards, without specific reference to a particular standard. Many different tests are performed during the development, design verification and design validation of a new product. The purpose of these tests is to discover weaknesses in the design and to undertake actions to eliminate these weaknesses and thereby improve performance, quality, safety, robustness, reliability and availability and reduce costs. This standard covers only the cases where statistical methods are used to analyse test data although the guidelines on test conditions, test planning and test documentation will be applicable to most tests. The following topics are important and although discussed in this standard are more fully dealt with in their respective standards: availability testing (see IEC 61070); testing of maintainability measures (see IEC 60706) and measures of reliability growth (see IEC 61014 and IEC 61164). This standard does not cover software testing (see IEC 61704), however it is applicable to items containing both hardware and software. This standard is therefore applicable to a wide range of products including consumer, industrial, military and aerospace applications. This part of IEC 60300 covers analysis for verification, determination, comparison and success/failure ratio evaluation. A flow chart giving guidance for planning the statistical treatment of reliability test data is shown in clause 9. Although not described in this standard, the considerations and statistical tools can be used in connection with environmental tests, accelerated step-stress tests and over-stress tests.

Dependability management - Application guide - Application guide - Reliability test conditions and statistical test principles

BS IEC 60300-3-10:2001 可靠性管理.应用指南.维修性

Can be used to implement a maintainability programme covering the initiation, development and in-service phases of a product. To be read in conjunction with IEC 60300-2:1995

Dependability management - Application guide - Maintainability

IEC 60300-3-5:2001 可信性管理 第3-5部分：应用指南 可靠性试验条件和统计试验的原则

This part of IEC 60300 provides guidelines for the planning and performing of reliability tests and the use of statistical methods to analyse test data. It describes the tests related to repaired and non-repaired items together with tests for constant and non-constant failure intensity and constant and non-constant failure rate. It is applicable: - when reliability testing is called for in a contract, either specifically or by inference; - when planning a reliability test; - during a reliability test; - when analysing data from and reporting on the outcome of a reliability test. This standard also applies when a contract or test plan specifies the use of IEC statistical standards, without specific reference to a particular standard. Many different tests are performed during the development, design verification and design validation of a new product. The purpose of these tests is to discover weaknesses in the design and to undertake actions to eliminate these weaknesses and thereby improve performance, quality, safety, robustness, reliability and availability and reduce costs. This standard covers only the cases where statistical methods are used to analyse test data although the guidelines on test conditions, test planning and test documentation will be applicable to most tests. The following topics are important and although discussed in this standard are more fully dealt with in their respective standards: availability testing (see IEC 61070); testing of maintainability measures (see IEC 60706) and measures of reliability growth (see IEC 61014 and IEC 61164). This standard does not cover software testing (see IEC 61704), however it is applicable to items containing both hardware and software. This standard is therefore applicable to a wide range of products including consumer, industrial, military and aerospace applications. This part of IEC 60300 covers analysis for verification, determination, comparison and success/failure ratio evaluation. A flow chart giving guidance for planning the statistical treatment of reliability test data is shown in clause 9. Although not described in this standard, the considerations and statistical tools can be used in connection with environmental tests, accelerated step-stress tests and over-stress tests.

Dependability management - Part 3-5: Application guide; Reliability test conditions and statistical test principles

IEC 60300-3-10:2001 可信性管理 第3-10部分：应用指南 维修性

This International Standard, which forms part of the series of standards in the IEC 60300-3 series, is the application guide for maintainability. It can be used to implement a maintainability programme covering the initiation, development and in-service phases of a product, which form part of the tasks described in IEC 60300-2. It provides guidance on how the maintenance aspects of the tasks should be considered in order to achieve optimum maintainability. It should be noted that the full programme described in this standard would only be applied to a major complex product with the potential for long-term usage. For less complex maintainable products, a simpler programme should be adopted by tailoring the programme to suit the degree of complexity and the requirements of the customer. The standard uses other IEC standards and guides, notably IEC 60706, as reference documents or tools to provide more detail as to how a task should be undertaken. Contracts between customer and supplier will vary widely according to conditions and circumstances in different industries. This standard is written on the premise that a product is to be developed by a contractor from a basic concept for the particular requirements of a user when the product is considered to be a development item (Dl). However, in many instances, where a product already exists and needs little or no development effort; it is a Non-development item (NDI) and the full maintainability programme as described in this standard will not be required. However, the principles laid down in the standard can be applied as required, by tailoring the maintainability programme to suit the needs of the project.

Dependability management - Part 3-10: Application guide; Maintainability

IEC 60605-6/COR1:2000 设备可靠性试验.第6部分:恒定失效率和恒定失效密度假设的有效性试验

Equipment reliability testing - Part 6: Tests for the validity of the constant failure rate or constant failure intensity assumptions

JIS Z 8115:2000 可靠性术语汇编

この規格は，ディべンダビリティに用いる主な用語とその定義について規定する。

Glossary of terms used in dependability

IEC PAS 62182:2000 非气密表面安装器件可靠性试验前的预置条件

Preconditioning of nonhermetic surface mount devices prior to reliability testing

BS ISO/IEC 10164-14:2000 信心和诊断测试范畴

Defines a Systems Management Function that may be used by an application process in a centralised or decentralised management environment to interact for the purpose of systems management, as defined by CCITT Rec. X.700 (ISO/IEC 7498-4). The identical text is published as ITU-T-Rec. X.737.

Confidence and diagnostic test categories