L05 可靠性和可维护性 标准查询与下载

KS A IEC 61703:2004 可靠性、有效性、维修性和维修支持术语的数学表示

이 규격은 IEC 60050-191에 정의 되어 있는 신뢰성, 가용성, 보전성 및 보전

Mathematical expressions for reliability, availability,maintainability and maintenance support terms

KS A IEC 61014:2004 可靠性增长计划

이 규격은 신뢰성 성장을 이루기 위하여 하드웨어와 소프트웨어 아이템의 취약의 노출과 제

Programmes for reliability growth

NF C20-300-1:2004 可靠性管理.第1部分:可靠性管理系统

Dependability management - Part 1 : dependability management systems.

DIN EN 60300-3-14:2004 可信性管理.第3-14部分:应用指南.维修和维修支持

This part of IEC 60300 describes a framework for maintenance and maintenance support and the various minimal common practices that should be undertaken. The purpose of this standard is to outline, in a generic manner, management, processes and techniques related to maintenance and maintenance support that are necessary to achieve adequate dependability to meet the operational needs of the customer.#,,#

Dependability management - Part 3-14: Application guide - Maintenance and maintenance support (IEC 60300-3-14:2004); German version EN 60300-3-14:2004

BS EN 60300-3-3:2004 可信性管理.应用指南.寿命周期成本

This part of IEC 60300 provides a general introduction to the concept of life cycle costing and covers all applications. Although the life cycle costs consist of many contributing elements, this standard particularly highlights the costs associated with dependability of the product. This standard is intended for general application by both customers (users) and suppliers of products. It explains the purpose and value of life cycle costing and outlines the general approaches involved. It also identifies typical life cycle cost elements to facilitate project and programme planning. General guidance is provided for conducting a life cycle cost analysis, including life cycle cost model development. Illustrative examples are provided to explain the concepts.

Dependability management - Application guide - Life cycle costing

BS EN 62309:2004 含可再用部件的产品的可靠性.功能和试验的要求

This International Standard introduces the concept to check the reliability and functionality of reused parts and their usage within new products. It also provides information and criteria about the tests/analysis required for products containing such reused parts, which are declared "qualified-as-good-as-new" relative to the designed life of the product. In this standard, the term "product" covers electrical, electro-mechanical, mechanical parts or hardware that may contain software. "Qualified-as-good-as-new" does not apply to software products, concepts and ideas. The purpose of this standard is to ensure by tests and analysis that the reliability and functionality of a new product containing reused parts is comparable to a product with only new parts. This would justify the manufacturer granting the next customer the full warranty of the product with "qualified-as-good-as-new" parts. NOTE This standard can also be applied in producing product specific standards by technical committees responsible for an application sector.

Dependability of products containing reused parts - Requriements for functionality and tests

IEC 60300-3-2:2004 可信性管理.第3-2部分:应用指南.现场收集可信性数据

This part of IEC 60300 provides guidelines for the collection of data relating to reliability, maintainability, availability and maintenance support performance of items operating in the field. It deals in general terms with the practical aspects of data

Dependability management - Part 3-2: Application guide - Collection of dependability data from the field

DIN EN 61164:2004 可靠性增长.统计试验和评估方法

This International Standard gives models and numerical methods for reliability growth assessments based on failure data, which were generated in a reliability improvement programme. These procedures deal with growth, estimation, confidence intervals for product reliability and goodness-of-fit tests.#,,#

Reliability growth - Statistical test and estimation methods (IEC 61164:2004); German version EN 61164:2004

DIN EN 60300-2:2004 可靠性管理.第2部分:可靠性管理指南

This part of IEC 60300 provides guidelines for dependability management of product design, development, evaluation and process enhancements. Life cycle models are used to describe product development or project phases. A tailoring process is recommended for the selection of relevant dependability programme tasks for time-phased implementation to meet varied user needs. This standard is applicable for detailed planning and implementation of a dependability programme to meet specific product needs.

Dependability management - Part 2: Guidelines for dependability management (IEC 60300-2:2004); German version EN 60300-2:2004

BS EN 61164:2004 可靠性增长.统计试验和估计方法

This International Standard gives models and numerical methods for reliability growth assess-ments based on failure data, which were generated in a reliability improvement programme. These procedures deal with growth, estimation, confidence intervals for product reliability and goodness-of-fit tests.

Reliability growth - Statistical test and estimation methods

BS EN 60300-3-12:2004 可靠性管理.应用指南.集成逻辑支持

This part of IEC 60300-3 is an application guide intended for use by a wide range of suppliers including large and small companies wishing to offer a competitive and quality product which is optimized for the purchaser and supplier for the complete product life cycle. This standard can be applied to both commercial and military products. It describes the process of ILS, and the various minimal common practices and logistic data analyses that should be undertaken to meet this objective.

Dependability management - Application guide - Integrated logistic support

IEC TR 62380:2004 可靠性数据手册.电子组件、PCBs和设备的可靠性预测用通用模型

Provides elements to calculate the failure rate of mounted electronic components. It makes equipment reliability optimization studies easier to carry out, thanks to the introduction of influence factors.

Reliability data handbook - Universal model for reliability prediction of electronics components, PCBs and equipment

ANSI/IEEE 1332:2004 电子系统和设备的开发和生产的可靠性程序

Encouracges suppliers and customers to cooperatively integrate their reliability processes.

Reliability Program for the Development and Production of Electronic Systems and Equipment

IEC 60300-3-3:2004 可信性管理.第3-3部分:应用指南.寿命成本分析

Dependability management – Part 3-3: Application guide – Life cycle costing (Edition 2.0)

NF C20-300-2:2004 可信性管理.第2部分:可信性管理指南

Dependability management - Part 2 : guidelines for dependability management.

IEC 60300-3-14:2004 可信性管理.第3-14部分:应用指南.维修和维修支持

Describes a framework for maintenance and maintenance support and the various minimal common practices that should be undertaken.Outlines in a generic manner, management, processes and techniques related to maintenance and maintenance support that are ne

Dependability management - Part 3-14: Application guide - Maintenance and maintenance support

IEC 62309:2004 含再用部件的产品的可靠性.功能性要求和试验

Introduces the concept to check the reliability and functionality of reused parts and their usage within new products. Also provides information and criteria about the tests/analysis required for products containing such reused parts, which are declared

Dependability of products containing reused parts - Requirements for functionality and tests

BS EN 60300-3-14:2004 可靠性管理.应用指南.维护和维护支持

This part of IEC 60300 describes a framework for maintenance and maintenance support and the various minimal common practices that should be undertaken. The purpose of this standard is to outline, in a generic manner, management, processes and techniques related to maintenance and maintenance support that are necessary to achieve adequate dependability to meet the operational needs of the customer. NOTE 1 Maintenance and maintenance support are a major element of dependability as described in IEC 60300-1 and IEC 60300-2. In some cases, regulatory and other mandatory requirements need to be considered. Maintenance and maintenance support requirements and obligations may therefore need to be specified in a contract, which cites this standard. This standard is intended for use by a wide range of suppliers, maintenance support organizations and users and can be applied to all items. This standard is applicable to items, which include all types of products, equipment and systems (hardware and associated software). Most of these require a certain level of maintenance to ensure that their required functionality, dependability, capability, economic, safety and regulatory requirements are achieved. NOTE 2 For consistency, this standard will use the term "item" as defined in 3.1.5, except where the context requires otherwise.

Dependability management - Application guide - Maintenance and maintenance support

BS EN 60300-2:2004 可靠性管理.可靠性管理指南

This part of IEC 60300 provides guidelines for dependability management of product design, development, evaluation and process enhancements. Life cycle models are used to describe product development or project phases. A tailoring process is recommended for the selection of relevant dependability programme tasks for time-phased implementation to meet varied user needs. This part of IEC 60300 is applicable for detailed planning and implementation of a dependability programme to meet specific product needs. The tailoring process provides a method for selection of dependability programme elements and associated processes from a product or project perspective. This standard is applicable to all organizations, during all life-cycle phases and in any contract situation, regardless of type, size and product provided.

Dependability management - Guidelines for dependability management

DIN IEC 60300-3-10:2004 可信性管理.第3-10部分:应用指南.可维修性

This International Standard, which forms part of the series of standards in the IEC 60300-3 series, is the application guide for maintainability. It can be used to implement a maintainability programme covering the initiation, development and in-service phases of a product, which form part of the tasks described in IEC 60300-2.

Dependability management - Part 3-10: Application guide - Maintainability (IEC 60300-3-10:2001)